高速逆流色谱分离纯化川西獐牙菜中3种(口山)酮苷元

建立了高速逆流色谱分离川西獐牙菜中3种(口山)酮苷元的方法.溶剂系统为V(正己烷):V(乙酸乙酯):V(甲醇):V(水)=5:5:6:4,上相为固定相,下相为流动相,转速为850 r/min,流速为2.5 mL/min,温度为25℃.从川西獐牙菜氯仿萃取部位的(口山)酮苷元混合物中制备得到18mg 1,8-二羟基-3,...     

高速逆流色谱分离纯化防风中升麻素苷和5-O-甲基维斯阿米醇苷

建立了高速逆流色谱分离制备防风中有效成分升麻素苷和5-O-甲基维斯阿米醇苷的方法.防风根的粉末经甲醇浸泡提取和减压蒸馏,得粗提浸膏.以V(乙酸乙酯):V(正丁醇):V(水)=2:7:9为溶剂,上相为固定相,下相为流动相,流速2.0 mL/min.从316 mg防风粗提物中一步分离得到13.9 mg升麻素苷和25 mg 5-O-甲基维斯阿米醇苷,纯度分别为98.1%和99 2%.采用ESI-MS, 1H NMR 和13C NMR对目标化合物的结构进行了鉴定.     

高速逆流色谱法对独角莲中有效成分皂苷的分离纯化

本文采用高速逆流色谱法对独角莲中的有效成分皂苷进行分离纯化.分别以乙酸乙酯∶正丁醇∶乙腈∶水=5∶1∶1∶5(V/V)及乙酸乙酯∶正丁醇∶乙醇∶水=5∶10∶2∶20(V/V)为溶剂系统,用下相作流动相,上相作固定相,分别采用2 mL/min及1.5 mL/min 的流动相流速、800 r/min的转速对独角莲中的有效成分皂苷进行分离,得到纯度98%的胡萝卜苷6 mg.     

高速逆流色谱分离制备甜瓜蒂中葫芦素类化合物

采用高速逆流色谱法分离制备了甜瓜蒂中3种葫芦素类化合物.以正己烷-乙酸乙酯-甲醇-水(1.2:0.8:0.8:1.2,V/V)为两相溶剂系统,上相为固定相,下相为流动相.在主机转速800 r/min、流动相流速2.0mL/min、分离温度25℃、检测波长254nm条件下进行分离,所得产物纯度经HPLC检测,结构经MS、...     

高速逆流色谱分离制备紫锥菊中的菊苣酸

建立了高速逆流色谱分离制备紫锥菊有效成分菊苣酸的新方法。溶剂系统为V(正己烷):V(乙酸乙酯):V(甲醇):V(0.5%乙酸)=1:4:2:5.5,上相为固定相,下相为流动相。从200mg紫锥菊粗提物一次分离得到纯度为96.8%的菊苣酸33.6mg,并用LC-MS-MS鉴定了化学结构。     

高速逆流色谱法从秦艽地上部分制备分离龙胆苦苷

采用高速逆流色谱法分离纯化秦艽地上部分中的龙胆苦苷。溶剂系统为V(氯仿)∶V(甲醇)∶V(水)=4∶4∶2,上相为固定相,下相为流动相,转速为800r/min,流速为2mL/min。所得产物经LC-MS分析为龙胆苦苷,纯度经高效液相色谱分析为94.0%(峰面积归一化法)。在保证分离效果的前提下,增大进样量,摸索制备分离龙胆苦苷的高速逆流色谱条件,为用高速逆流色谱法大量制备龙胆苦苷提供了一个可行方法。     

高速逆流法对刺五加有效成分刺五加苷E的分离制备

 采用高速逆流法分离纯化刺五加粗品中的刺五加苷E。溶剂系统为氯仿 甲醇 异丙醇 水,体积比为5∶6∶1∶4,上相为固定相,下相为流动相,转速为800r/min,流速为2 0mL/min。所得刺五加苷E经高效液相分析,测定纯度为98%(峰面积百分比)。这为其他苷类等极性物质的分离纯化提供了依据。     

高速逆流色谱法分离紫锥菊花色苷及其抗氧化性研究

建立了高速逆流色谱(HSCCC)分离制备紫锥菊花色苷类化合物的方法,并对所获得的2个花色苷单体进行了体外抗氧化性实验。以新鲜紫锥菊花瓣为原料,含0.1%HCl的60%乙醇为溶剂避光冷浸提取,经乙酸乙酯萃取和D101大孔吸附树脂(100 mL,2 cm×30 cm)纯化后,得2.1 g紫锥菊花色苷提取物干粉样品。以水-正丁醇-甲基叔丁基甲醚-乙腈-三氟乙酸(6∶3∶2∶1∶0.001)为HSCCC分离溶剂系统,上相为固定相,下相为流动相,流速2.0 mL/min,进样量160 mg,通过一次分离得到2种花色苷单体化合物,经HPLC检测其纯度分别达95.1%(9.8 mg)、98.2%(14.3 mg),MS及NMR技术鉴定其结构分别为矢车菊素-3-O-β-D葡萄糖苷(化合物1)和矢车菊素-3-O-(6″-O-丙二酰-β-D葡萄糖苷)(化合物2)。以Vc为对照组,对所获得的2种花色苷单体化合物进行了1,1-二苯基-2苦肼基(DPPH.)体外抗氧化性能评价,结果显示2种花色苷对DPPH.的半清除率(EC50)均小于10 mg/L,小于对照样Vc,表明2种花色苷均具有较强的自由基清除作用,且化合物1的清除能力强于化合物2。     

薄层色谱图像分析定量-高速逆流色谱法快速分离制备吴茱萸中的三个生物碱类化合物

建立了薄层色谱图像分析定量-高速逆流色谱法从吴茱萸甲醇提取物中快速分离制备吴茱萸碱、吴茱萸次碱、吴茱萸卡品碱3个化合物的方法。采用数码相机对HSCCC溶剂系统上下相中的目标化合物进行TLC图像采集,使用积分软件OPSIA计算各溶剂系统对应的K值,筛选出最佳溶剂系统正己烷-乙酸乙酯-甲醇-水(3:2.5:3.5:2,V/V)。取上相为固定相,下相为流动相,检测波长为254 nm,在主机转速860 r/min、流动相流速1.5 mL/min的条件下,一次性从300 mg样品中分离制备得到经1H-NMR和13C-NMR确证的吴茱萸碱(15.3mg)、吴茱萸次碱(10.1 mg)、吴茱萸卡品碱(20.7 mg),纯度分别为93.6%,97.3%和95.1%(HPLC法)。     

正交设计试验优化高速逆流色谱分离制备玛咖中芥子油苷的条件

基于高速逆流色谱（HSCCC）技术从玛咖中分离制备出两种芥子油苷,苄基芥子油苷（glucotropaeolin, GTL）和甲氧基苄基芥子油苷（glucolimnanthin, GLI）。使用正交设计试验对分离条件进行优化,采用高分辨质谱对制备的组分进行鉴定,采用高效液相色谱法（HPLC）对组分进行定量分析。确定了两个组分GTL与GLI的HSCCC最佳分离条件：溶剂系统为正丁醇-乙腈-200 g/L硫酸铵溶液（1:0.5:2.4, v/v/v）,上相为固定相,下相为流动相,流动相流速2 mL/min,主机转速900 r/min,从玛咖根粗提物中一次性分离得到157.72 mg/kg纯度为97.9%的苄基芥子油苷和31.93 mg/kg的甲氧基苄基芥子油苷,固定相保留率达57.6%。该方法成本低,简便易行,样品损失量小,可大量循环进样制备。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).