政府奖励对报废汽车回收模式选择的作用机制研究——基于企业社会责任视角

随着我国报废汽车数量的增多,由其造成的交通隐患、环境污染和资源浪费已成为重要社会问题,而如何设计合理可行的回收模式成为解决问题的关键。以制造商主导为前提,提出了基于企业社会责任的报废汽车回收模型,构建了制造商回收、销售商回收和第三方回收模式下的回收流程和数学模型,通过实例对考虑和不考虑企业社会责任两种情况下的回收模型进行了分析,探讨了不同政府奖励下报废汽车回收模式的策略选择。通过研究发现:(1)不论是否考虑企业社会责任,随着政府奖励的增加,制造商最终都会选择由自己进行回收;(2)当考虑企业社会责任时,政府奖励和决策者经济责任偏好都会导致决策的改变,随着政府奖励和赋予经济责任权重的同步增加,制造商的决策由第三方企业回收模式或销售商回收模式变成了制造商回收模式,表明政府奖励和企业社会责任对报废汽车回收模式选择具有显著影响。     

光谱特征提取对近似矿物光谱差异性影响分析

矿物光谱特征是基于光学遥感数据对矿物进行种类识别及定量反演的理论基础,光谱特征提取是高光谱数据常用的技术手段,但在多光谱数据中较少涉及。近似矿物识别是矿物光谱分类应用中的难点,目前还缺少有效指标来指示近似矿物类别光谱的差异性。光谱特征提取有望提高矿物分类精度,但该处理对近似矿物光谱差异性的影响还缺少相关研究。本文从矿物光谱差异性的原理出发,通过类间和类内光谱角的比值体现不同类别群体差异,并引入样本量因素,提出了类别可分比作为近似矿物光谱差异性的指标。以明矾石和高岭石两种近似矿物为例,对USGS光谱库光谱及Hyperion,ASTER,OLI等传感器的模拟数据进行光谱特征提取处理,通过对比处理前后矿物光谱差异性的变化,分析光谱特征提取对近似矿物光谱差异性的影响。实验结果表明,有效的光谱特征提取可以显著提高近似矿物光谱差异性,并且光谱分辨率越高,近似矿物光谱差异性越大。此外,光谱分辨率及中心波长设置对于包络线去除结果有很大影响,多光谱数据吸收特征提取效果有待进一步提高。该研究为今后近似矿物光谱识别精度的提高奠定了基础,也为未来新型遥感找矿传感器参数设置提供了参考。     

CSR外靶实验终端中子流测量的模拟

随着兰州重离子加速器冷却储存环(HIRFL-CSR)外靶实验终端中子墙的建立, 为实验测量高能中子提供了机遇. 为确定CSR外靶实验终端对中子流测量的可行性, 基于BUU理论模型分别对对称系统(Ni+Ni, Pb+Pb)和非对称系统(Pb+Ni)进行了模拟计算, 发现当系统能量达到几百MeV/u时, 中子流信号相当明显, 并与碰撞参数有明显的依赖关系. 模拟结果表明, 在前角20°的覆盖范围内, 可以较好地实现中子流测量所需要的反应平面确定及碰撞参数选择. 对双击事件及其对中子流的影响进行了简单的讨论.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

An intense terahertz radiation source at the Compact ERL

The Compact ERL is an energy recovery LINAC (ERL) test facility that is planned for KEK. The circumference of the recirculation path will be 70 m. Initially, the beam energy will be about 65 MeV and the current about 10 mA. Although the primary purpose of the machine is to aid the development of the key technologies that are essential for building an ultra-brilliant new synchrotron light source based on an ERL, the Compact ERL itself has great potential as an intense source of terahertz radiation. To generate the intense terahertz radiation, an electron bunch of a very short bunch length is required and bunch compression is inevitable. We discuss the parameters of the Compact ERL, present the results of a simulation of bunch compression, and make an estimate of the generated coherent synchrotron radiation.     

企业社会责任下碳减排优化策略与协调机制研究

基于企业社会责任(CSR)的视角,本文研究由生产低碳产品的制造商和零售商组成的二级供应链的最优策略及供应链协调问题。通过构造供应链成员具有社会责任感的效用函数,分析了CSR对各成员的利润和环境的影响。研究发现:制造商和零售商都是通过降低碳排放水平来体现社会责任感;无论制造商有社会责任感还是零售商有社会责任感,供应链的利润都增大;在收益共享-成本分摊合同(RC合同)下协调,可以使制造商和零售商实现双赢(帕累托最优);零售商应该承担更多的社会责任,降低碳排放水平。     

HIRFL-CSR commissioning in 2006 and 2007

HIRFL-CSR, a new heavy ion cooler-storage-ring system at IMP, had been in commissioning since the beginning of 2006. In the two years of 2006 and 2007 the CSR commissioning was finished, including the stripping injection (STI), electron-cooling with hollow electron beam, C-beam stacking with the combination of STI and e-cooling, the wide energy-range synchrotron ramping from 7 MeV/u to 1000 MeV/u by changing the RF harmonic-number at mid-energy, the multiple multi-turn injection (MMI), the beam accumulation with MMI and e-cooling for heavy-ion beams of Ar, Kr and Xe, the fast extraction from CSRm and single-turn injection to CSRe, beam stacking in CSRe and the RIBs mass-spectrometer test with the isochronous mode in CSRe by using the time-of-flight method.     

基于多维尺度分析的企业社会责任重叠测评实证研究

目前学界的研究已经从讨论企业为什么要履行企业社会责任(CSR)逐步转变为探讨如何履行CSR.创新性地提出了CSR重叠的概念并提出了利用多维尺度分析(MDS)方法模型对CSR重叠进行测评,选取了5家煤炭企业做了实证研究,结果显示该方法能够清晰的解读CSR重叠背后的因素,企业应该围绕"硬责任"和"软责任"两大维度制定相应CSR发展策略.     

手性位移试剂Eu(dcm)~3的一个改进合成方法

我们对H(dcm)的Whitesides合成路线的关键步骤龙脑酰甲烷的合成和缩合反应进行了重要的改进。     

HIRFL-CSR complex

The construction and commissioning of HIRFL-CSR were finished in 2007. From 2000 to 2005 the subsystem and key devices of CSR were successfully fabricated, such as magnet, power supply, UHV system, e-cooler, electric-static deflector with the septum of 0.1 mm, and the fast-pulse kicker with the rise time of 150 ns. After that the CSR commissioning activities were performed in 2006 and 2007, including the accumulation of those heavy ions of C, Ar, Kr and Xe by the combination of stripping injection （STI） or multiple multi-turn injection （MMI） and e-cooling with a hollow e-beam, wide energy-range synchrotron ramping by changing the RF harmonic-number at mid-energy, the beam stacking in the experimental ring CSRe, the RIBs mass-measurement with the isochronous-mode in CSRe by using the time-of-flight method, and the ion beam slow-extraction from CSRm.