重离子碰撞中阈能附近超子产生机制

在量子分子动力学输运模型LQMD(Lanzhou quantum molecular dynamics transport model)框架下,研究了不同重离子反应系统中同位旋和核介质效应对超子产生以及动能谱的影响.基于手征有效场理论,引入了动量和密度相关的排斥超子-核子光学势,并且考虑了该势对超子产生截面阈能的修正....     

CSR外靶实验终端中子流测量的模拟

随着兰州重离子加速器冷却储存环(HIRFL-CSR)外靶实验终端中子墙的建立, 为实验测量高能中子提供了机遇. 为确定CSR外靶实验终端对中子流测量的可行性, 基于BUU理论模型分别对对称系统(Ni+Ni, Pb+Pb)和非对称系统(Pb+Ni)进行了模拟计算, 发现当系统能量达到几百MeV/u时, 中子流信号相当明显, 并与碰撞参数有明显的依赖关系. 模拟结果表明, 在前角20°的覆盖范围内, 可以较好地实现中子流测量所需要的反应平面确定及碰撞参数选择. 对双击事件及其对中子流的影响进行了简单的讨论.     

利用α关联衰变链鉴别新同位素265107Bh

主要介绍了合成和鉴别107号元素的新同位素265Bh的实验装置、实验方法以及实验结果.目标核265Bh是由能量为135MeV的26Mg离子轰击243Am靶,通过融合蒸发反应而产生. 反应产物首先由He-jet系统传输到装有数个探测器对的转轮收集测量系统，然后依靠母子核遗传关系通过观察新同位素和它们已知子核261Db和257Lr之间的a衰变的关联，来实现对新核素的鉴别. 实验测得265Bh的a衰变能量为(9.24±0.05)MeV, 半衰期为0.94＋0.70 -0.31s. 从该实验得出的265Bh的a衰变能量和半寿命能够与理论预言一致.     

热熔合反应合成超重核产生截面的同位素依赖性

通过在形成超重核的重离子俘获和熔合过程中引入位垒分布函数的方法对双核模型做了进一步发展. 超重核形成过程中的俘获、熔合和蒸发3个阶段分别采用了半经验的耦合道模型、数值求解主方程和统计蒸发模型的方法来描述. 计算了近年来Dubna小组利用热熔合反应⁴⁸Ca(²⁴³Am, 3n—5n)^288—286115和⁴⁸Ca(²⁴⁸Cm, 3n—5n)^293—291116合成超重新核素的蒸发余核激发函数. 系统分析了⁴⁸Ca轰击锕系元素U,Np,Pu,Am,Cm合成超重核Z=112—116产生截面的同位素依赖性. 给出了合成超重新核素最佳的弹靶组合和入射能量, 即有最大的超重核产生截面. 计算说明, 壳修正能和中子分离能是影响超重核生成截面产生同位素依赖性的主要因素.     

Nuclear Potential and Fusion Cross Sections for Synthesizing Super-Heavy Elements in Di-nuclear Systems

A double foMing method with simplified Skyrme-type nucleon nucleon interaction is used to calculate the nuclear interaction potential between two nuclei. The calculation is performed in tip-to-tip orientation of the two nuclei if they are deformed. Based on this method, the potential energy surfaces~ the fusion probabilities and the evaporation residue cross sections for some cold fusion reactions leading to super-heavy elements within di-nuclear system model are evaluated. It is indicated that after the improvement, the exponential decreasing systematics of the fusion probability with increasing charge number of projectile on the Pb based target become better and the evaporation residue cross sections are in better agreement with the experimental data.     

Possible Way to Synthesize Superheavy Element Z=117

Within the framework of the dinuclear system model, the production of superheavy element Z = 117 in possible projectile-target combinations is analysed systematically. The calculated results show that the production cross sections are strongly dependent on the reaction systems. Optimal combinations, corresponding excitation energies and evaporation channels are proposed, such as the isotopes^248.249 Bk in ^48 Ca induced reactions in 3n evaporation channels and the reactions ^45Sc＋246.248Cm in 3n and 4n channels, and the system ^51 V＋ 244pu in 3n channel.     

265Bh(Z=107)同位素的首次观测

在兰州的重离子加速器上用²⁶Mg离子束轰击²⁴³Am靶,产生了新同位素²⁶⁵Bh.通过观测新同位素²⁶⁵Bh和它的已知子核²⁶¹Db和²⁵⁷Lr之间的α衰变的关联,实现了对新核素的鉴别.实验中使用了一套新建立的具有数个探测器对的转轮收集探测系统.将该系统用于特殊的母–子核搜索模式,从而大大减少了本底.共测得了8个²⁶⁵Bh的α衰变关联事件;同时4个已知核²⁶⁴Bh的衰变关联事件也被鉴别出来.实验测得²⁶⁵Bh的α衰变能量为(9.24±0.05)MeV,半衰期为0.94+0.70–0.31s.     

Production mechanism of superheavy nuclei in massive fusion reactions

Within the concept of the dinuclear system (DNS), a dynamical model is proposed for describing the formation of superheavy nuclei in complete fusion reactions by incorporating the coupling of the relative motion to the nucleon transfer process. The capture of two heavy colliding nuclei, the formation of the compound nucleus and the de-excitation process are calculated by using an empirical coupled channel model, solving a set of microscopically derived master equations numerically and applying statistical theory, respectively. Fusion-fission reactions and evaporation residue excitation functions of synthesizing superheavy nuclei (SHN) are investigated systematically and compared them with available experimental data. The possible factors that affecting the production cross sections of SHN are discussed in this workshop.     

Neutron and Proton Diffusion in Fusion Reactions for the Synthesis of Superheavy Nuclei

The restriction of the one dimensional （1D） master equation （ME） with the mass number of the projectile-like fragment as a variable is studied, and a two-dimensional （2D） master equation with the neutron and proton numbers as independent variables is set up, and solved numerically. Our study showed that the 2D ME can describe the fusion process well in all projectile target combinations. Therefore the possible channels to synthesize super-heavy nuclei can be studied correctly in wider possibilities. The available condition for employing 1D ME is pointed out.