全文获取类型
收费全文 | 75篇 |
免费 | 19篇 |
国内免费 | 15篇 |
专业分类
化学 | 34篇 |
力学 | 5篇 |
数学 | 26篇 |
物理学 | 44篇 |
出版年
2024年 | 1篇 |
2023年 | 4篇 |
2022年 | 2篇 |
2021年 | 2篇 |
2020年 | 2篇 |
2019年 | 4篇 |
2018年 | 2篇 |
2017年 | 4篇 |
2016年 | 5篇 |
2015年 | 4篇 |
2014年 | 6篇 |
2013年 | 3篇 |
2012年 | 3篇 |
2011年 | 2篇 |
2010年 | 2篇 |
2009年 | 9篇 |
2008年 | 11篇 |
2007年 | 9篇 |
2006年 | 1篇 |
2005年 | 3篇 |
2004年 | 2篇 |
2003年 | 2篇 |
2002年 | 2篇 |
1999年 | 2篇 |
1997年 | 3篇 |
1996年 | 6篇 |
1995年 | 3篇 |
1994年 | 3篇 |
1989年 | 1篇 |
1986年 | 1篇 |
1985年 | 3篇 |
1983年 | 1篇 |
1981年 | 1篇 |
排序方式: 共有109条查询结果,搜索用时 203 毫秒
1.
采用耐盐吸附树脂NDA-66预处理增塑剂DIBP生产废水,研究了不同吸附剂对DIBP生产废水中主要污染物邻苯二甲酸的吸附脱附效果。实验结果表明,5种吸附剂中,NDA-66树脂对邻苯二甲酸处理效果最好,且符合Freundlich方程和Langmuir方程;动态吸附脱附过程中,单柱吸附量为7BV,最佳流速为1.5BV/h,最佳脱附剂为1BV 8%Na OH+2BV蒸馏水,温度为328K,脱附率能达到99%以上;放大实验过程中,NDA-66耐盐吸附树脂对增塑剂DIBP生产废水中邻苯二甲酸吸附稳定性较好。 相似文献
2.
为了开发与应用新型列车车体降噪内装结构,基于混合FE-SEA法对轨道车辆用新型橡胶泡棉夹芯板进行隔声与声辐射预测建模,并进行了试验验证,进而利用该模型分析了橡胶泡棉孔隙率与芯皮厚度比对其隔声性能、声辐射性能的影响规律,并通过敷设阻尼层优化了其声学性能。最后,在侧墙组合结构的声学设计中评价了其实际应用效果。结果表明:随着孔隙率的逐步下降,橡胶泡棉夹芯板隔声量上升趋势较为明显,而辐射声功率持续降低;随着芯皮厚度比的逐步提高,夹芯板隔声量呈略微上升趋势,辐射声功率则相应降低。在远离声源一侧的橡胶泡棉蒙皮外侧敷设阻尼层的效果最优,优化后夹芯板计权隔声量提高0.7dB,总声功率级降低0.7dB;相较于传统木质胶合板和铝蜂窝板,橡胶泡棉夹芯板相较于传统内装板材在结构隔声设计中具有轻量化优势。 相似文献
3.
利用自行设计的热爆炸实验装置,测定了以RDX、HMX、HMX/TATB、TATB为基的粘结炸药在三种尺寸下的有量纲热爆炸参数(临界温度、延滞期);利用Semmenov参数,求得了上述炸药热爆炸表现活化能,讨论了临界温度与圆柱体高和半径的关系、延滞期与超临界程度的关系、并预测了炸药在一些较大尺寸下的临界温度。 相似文献
4.
转换屏在高能X射线激发下的发光光谱对高能X光闪光照相接收系统的组建有着重要意义。应用OMA光谱采集系统,设计实验对CsI(TI)和LYSO转换屏在“神龙一号”直线感应加速器(LIA)X射线激发下的发光光谱进行研究,给出了光谱曲线。结果表明,相对于文献报道的低能X射线辐射,高能辐射下CsI(TI)屏的发光峰值波长向短波方向移动了14nm,LYSO屏的发光峰值波长向长波方向移动了18nm,而两屏的谱线半值宽度均没有明显变化。实验结果对当前闪光照像光电接收系统质量的评估及将来系统的优化设计将起到重要作用。 相似文献
5.
在不同的衬底温度下,使用反应射频磁控溅射法,在玻璃衬底上制备了氮化锌薄膜样品.用X射线衍射仪、原子力显微镜和椭偏仪对薄膜的晶体结构、表面形貌、光学性质进行了表征分析.薄膜的晶粒尺寸会随着衬底温度的升高先增大后减小,在200?C时薄膜的结晶性最好.用椭偏仪测试样品,建立物理模型计算出氮化锌薄膜在430—850 nm范围内的折射率和消光系数等光学参数.利用Tauc公式计算出氮化锌薄膜的光学带隙在1.73—1.79 eV之间. 相似文献
6.
为解决胶囊内窥镜分辨率与景深相互制约的问题,将一种单液体、电控、可变焦液体透镜应用到内窥镜光学系统中进行光学设计,在保证分辨率的同时,扩大了系统景深.采用CODE V软件进行设计,建立系统初始结构,构造液体透镜模型,基于液体透镜中液体的体积不变,曲率、孔径和厚度可变的结构约束特点,在MATLAB中计算出不同物距下透镜的曲率、孔径和厚度数据,将其导入CODE V的系统模型中,并提出了相应的优化流程.设计并优化带有液体透镜的胶囊内窥镜系统,实现了系统在3~100mm景深范围内的清晰成像,视场角大于110°,全视场范围内调制传递函数在40lp/mm频率下均大于0.3. 相似文献
7.
8.
Influence of Different Substrates on Laser Induced Damage Thresholds at 1064nm of Ta2O5 Films 下载免费PDF全文
Ta2O5 films are prepared on Si, BK7, fused silica, antireflection (AR) and high reflector (HR) substrates by electron beam evaporation method, respectively. Both the optical property and laser induced damage thresholds (LIDTs) at 1064 nm of Ta2O5 films on different substrates are investigated before and after annealing at 673 K for 12 h. It is shown that annealing increases the refractive index and decreases the extinction index, and improves the O/Ta ratio of the Ta2O5 films from 2.42 to 2.50. Moreover, the results show that the LIDTs of the Ta2O5 films are mainly correlated with three parameters: substrate property, substoichiometry defect in the films and impurity defect at the interface between the substrate and the films. Details of the laser induced damage models in different cases are discussed. 相似文献
9.
10.
Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition. The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated. The results show that SiO2 protective layers exert little influence on the electric field intensity (EFI) distribution, microstructure and microdefect density but increase the absorption slightly. Annealing is effective on decreasing the microdefect density and the absorption of the films. Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT. Moreover, the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing. 相似文献