排序方式: 共有31条查询结果,搜索用时 31 毫秒
1.
2.
Ultrafast time-resolved optical transmissions in purified and as-grown single-walled carbon nanotube films are measured at a temperature of 200K. The signal of the purified sample shows a crossover from photobleaching to photoabsorption. The former and the latter are interpreted as the state filling and the red shift of the π-plasmon, respectively. The signal of the as-grown sample can be perfectly fitted by a single-exponential with a time constant of 232fs. The disappearance of the negative component in the as-grown sample is attributed to the charge transfer between the semiconducting nanotubes and the impurities. 相似文献
3.
We report the properties of a compact diode-pumped continuous-wave Nd:GdV04 laser with a linear cavity and different Nd-doped laser crystals. In a 0.2at.% Nd-doped Nd:GdVO4 laser, 1.54 W output laser power is achieved at 912nm wavelength with a slope efficiency of 24.8% at an absorbed pump power of 9.4W. With 0.3at.% Nd-doping concentration, we can obtain the either single-wavelength emission at 1064nm or 912nm or the dual-wavelength emission at 1064nm and 912nm by controlling the incident pump power. From an incident pump power of 11.6 W, the 1064nm emission between ^4Fa/2 and ^4I11/2 is suppressed completely by the 912nm emission between ^4Fa/2 and ^4I9/2. We obtain 670 mW output of the 912nm single-wavelength laser emission with a slope efficiency of 5.5% by taking an incident pump power of 18.4 W. Using a Nd:GdV04 laser with 0.4at.% Nd-doping concentration, we obtain either the single-wavelength emission at 1064nm or the dual-wavelength emission at both 1064nm and 912nm by increasing the incident pump power. We observe a strong competition process in the dualavelength laser. 相似文献
4.
The laser properties of the Nd:YGG crystal are investigated. The absorption spectrum from 500 to 90Onto and emission spectrum from 850 to 1400nm of Nd:YGG are measured. As much as 1.35 W output power of fundamental laser operating at 935 and 938nm with a slope efficiency of 15.7% and 105mW output power of frequency doubled blue laser are successfully obtained. 相似文献
5.
6.
以球形高效负载的TiCl4/MgCl2/邻苯二甲酸二异丁酯(DIBP)为催化剂, 采用本体聚合方法进行丙烯与1-丁烯共聚合研究. 考察了共单体效应对共聚活性及聚合物立构规整性的影响; 表征了共聚物的结构. 结果表明, 随着1-丁烯/丙烯投料比的增加, 聚合活性呈先升高后降低的趋势, 在1-丁烯/丙烯摩尔投料比为0.26条件下聚合活性达到最高, 并随着共聚物中1-丁烯含量的增加, 共聚物的熔点明显下降, 分子量降低, 分子量分布变窄, 同时共聚物力学性能有明显提高, 透明度逐渐增加. 相似文献
7.
8.
采用溶胶-凝胶法制备了SiO2/TiO2杂化材料,并通过双官能团试剂3-(甲氧基硅烷基)甲基丙烯酸丙酯(γ-MAPS)对其进行改性;改性溶胶与甲基丙基酸丁酯(BMA)作为功能单体,在毛细管中进行原位聚合反应,制备了新型的有机-无机杂化毛细管整体柱。 采用扫描电子显微镜观察了整体柱柱床的形貌。 以硫脲为电渗流标记物对所制备的整体柱进行了柱性能评价,考察了柱的稳定性和重现性,获得了88000 plates/m的柱效;考察了中性物质在柱上的的保留行为,得出该柱具有反相电色谱保留性能。 通过对2种短肽(磷酸肽和非磷酸肽)洗脱测试,实现了对磷酸肽的有效富集与分离。 相似文献
9.
10.
锻压机床由于生产效率高和材料利用率高的特点,被广泛应用于各领域.然而,锻压机床发生故障时,其故障种类繁多、故障数据量大,所以对锻压机床故障源的快速、准确诊断较困难.针对该问题,文章提出一种将故障树分析法和混沌粒子群算法相融合的方法,对锻压机床的故障源进行故障诊断.该方法是先通过故障树分析法对锻压机床的故障进行分析从而得到故障模式及其故障概率,然后由得到的故障模式和已知的故障维修经验分析归纳出故障模式的学习样本,再根据得到的故障概率运用混沌粒子群算法的遍历性快速、准确地诊断出锻压机床发生故障的精确位置.文章提出的方法以锻压机床的伺服系统为例进行了故障诊断实验,将该实验结果与遗传算法、粒子群算法进行对比.实验结果表明,文章的算法在锻压机床伺服系统的故障诊断中准确度更高、速度更快. 相似文献