X射线Kirkpatrick-Baez显微镜用超反射镜的研制

 介绍了一种可应用于X射线Kirkpatrick-Baez（KB）显微镜的光学元件—X射线超反射镜。选用的W和B₄C作为镀膜材料，膜对数为20，采用单纯型调优的方法实现了X射线超反射镜设计，用磁控溅射的方法在Si基片上完成了W/B₄C X射线超反射镜的制备。采用高分辨率X射线衍射仪（8 keV）测量了X射线超反射镜的反射特性。制备的X射线超反射镜在掠入射角分别为1.052°和1.143°处，反射角度带宽为0.3°，反射率达到20%，可满足KB型显微镜的要求。     

Design, Fabrication and Measurement of Ni/Ti Multilayer Used for Neutron Monochromator

Ni/Ti multilayers, which can be used for neutron monochromators, are designed, fabricated and measured. Firstly, their reflectivities are simulated based on the Nevot-Croce model. Reflectivities of two Ni/Ti multilayer mirrors with periods d = 10.3 nm （M1） and d = 7.8 nm （M2） are calculated. In the calculation, the reflectivity of the Ni/Ti multilayer is taken as a function of the gazing angle with different roughness factors δ =1.0 nm and = 1.5 nm. Secondly, these two multilayers are fabricated by the direct current magnetron sputtering technology. Thirdly their structures are characterized by small-angle x-ray diffraction. The roughness factors are fitted to be 0.68 nm and 1.16nm for M1 and M2, respectively. Finally their reflective performances are measured on the V14 neutron beam line at the Berlin Neutron Scattering Centre （BENSC）, Germany. The experimental data show that the grazing angle of the reflected neutron intensity peak increases, but the reflected neutron intensity decreases, with the decreasing periods of the multilayers.     

磁控溅射制备的W,WSi2,Si单层膜和W/Si,WSi2/Si多层膜应力

采用直流磁控溅射技术制备了厚度约100 nm的W,WSi2,Si单层膜和周期约为20 nm,Si膜层厚度与周期的比值为0.5的W/Si,WSi2/Si周期多层膜.利用台阶仪对镀膜前后基底表面的面形进行了测试,计算并比较了不同膜系的应力值.结果表明:W单层膜表现出较大的压应力,而W/Si周期膜则表现为张应力.WSi2单层...     

Mo/Si aperiodic multilayer broadband reflective mirror for 12.5-28.5-nm wavelength range

Aperiodic molybdenum/silicon (Mo/Si) multilayer designed as a broadband reflective mirror with mean reflectivity of 10% over a wide wavelength range of 12.5-28.5 nm at incidence angle of 5° is developed using a numerical optimized method. The multilayer is prepared using direct current magnetron sputtering technology. The reflectivity is measured using synchrotron radiation. The measured mean reflectivity is 7.0% in the design wavelength range of 12.5-28.5 nm. This multilayer broadband reflective mirror can be used in extreme ultraviolet measurements and will greatly simplify the experimental arrangements.     

多层膜劳厄透镜对8keV X射线的聚焦性能模拟研究

基于多层膜技术的劳厄(Laue)透镜能实现硬X射线纳米级聚焦,在X射线微纳分析领域具有重要的应用前景.基于衍射动力学理论,分析了X射线在多层膜劳厄透镜中的传播,计算了不同结构的多层膜劳厄透镜对8 keVX射线的聚焦性能.结果表明,最外层厚度为5 nm的倾斜多层膜劳厄透镜可获得5.7 nm的聚焦光斑和26%的平均衍射效率...     

Multilayers with high-reflectivity at 19.5 nm and low-reflectivity at 30.4 nm

The multilayer （ML） mirror with high-reflectivity （HR） at a specific emission line of 19.5 nm （Fe line） and low-reflectivity （LR） at 30.4 nm （He line） is needed to be designed and fabricated for observing the image of sun. Based on a variety of optimizations utilized different structures, the design is performed and the final results demonstrate that the reflectivity at 30.4 nm does not achieve minimum value when the reflectivity at 19.5 nm reaches the maximum value. The tradeoff should be done between the HR at 19.5 nm and LR at 30.4 nm. One optimized mirror is fabricated by direct current magnetron sputtering and characterized by grazing-incident X-ray diffraction （XRD） and synchrotron radiation （SR）. The experimental results demonstrate that the ML achieves the reflectivity of 33.3% at 19.5 nm and of 9.6× 10-4 at 30.4 nm at the incident angle of 13°.     

X射线天文望远镜的进展

综述了近年来X射线天文望远镜(如准直型望远镜、编码孔径望远镜、正入射周期多层膜望远镜、掠入射单层膜望远镜和掠入射非周期多层膜望远镜以及新型的“龙虾眼”型望远镜)的发展；阐述了各种X射线天文望远镜工作的原理和成像特点，指出各种X射线天文望远镜之间的性能是相互补充的；简要说明了国内近年来在X射线天文望远镜研究方面取得的进展，并展望了下一步工作．     

液体表面的遮光效应及其应用

首次发现了液体介质表面的遮光效应,讨论了遮光半径与液体介质性质的关系.基于这一发现,建立了一种测量液体折射率的新方法,该方法具有实时、自动化、高精度等特点.     

B_4C/Mo/Si high reflectivity multilayer mirror at 30.4 nm

The B4C/Mo/Si high reflectivity multilayer mirror was designed for He-Ⅱradiation (30.4 nm) using the layer-by-layer method. The theoretical peak reflectivity was up to 38.2% at the incident angle of 5℃. The B4C/Mo/Si multilayer was fabricated by direct current magnetron sputtering and measured at the National Synchrotron Radiation Laboratory (NSRL) of China. The experimental reflectivity of the B4C/Mo/Si multilayer at 30.4 nm was about 32.5%. The promising performances of the B4C/Mo/Si multilayer mirror could be used for the construction of solar physics instrumentation.     

可靠度分配中一个改进的直接寻查分配法

一、前言 J.Von Neumman首先提出了“用不甚可靠的元件组成高可靠系统”的著名命题和复合冗余方法,钱学森给此以高度的评价. 冗余系统可靠性优化是指在元件数量(费用、体积、重量、功耗)的限制条件下,如何配置冗余元件,使系统可靠性达到极大;或在达到所要求的可靠性指标的条件下使耗用资源最少. [1]、[2]中指出冗余最优化问题的严格解法,有动态规划法和整数规划法,它们的计算繁杂.[1]、[2]中又指出,有一类近似解法称直接寻查法,它虽不能保证最优解,但方法简单,适于工程应用.[3]将优选法与直接寻查法结合,改进了直接寻查法. 我们在前面著作…