排序方式: 共有29条查询结果,搜索用时 15 毫秒
1.
通过研究用自组装法制备的萘磺酸掺杂的纳米管结构聚苯胺(苯胺与萘磺酸的摩尔比分别为1∶025,1∶05,1∶1,1∶2,1∶3)的电阻率温度依赖关系(测量温区为80—300K),仔细分析聚苯胺的结构形貌特征,提出了变程跳跃隧道穿透混合模型:认为在萘磺酸掺杂的纳米管结构聚苯胺样品中,跳跃和隧穿两种机制同时起作用,载流子沿纳米管传导是变程跳跃过程起主要作用,而载流子在纳米管之间的传导是隧穿过程起主要作用.实验结果表明,不同浓度的萘磺酸掺杂对样品的低温电阻率的影响很大,随着掺杂浓度增加,载流子传导所需克服的能垒C0迅速减小,当掺杂接近饱和时,C0不再减小.实验中还研究了不同形貌对电阻率的影响,结果表明样品中纳米管所占比例的增大有利于载流子传导
关键词:
聚苯胺
纳米管
低温电阻率 相似文献
2.
研究了水和无水乙醇对萘磺酸掺杂的纳米管结构聚苯胺的电阻率-温度依赖关系的影响(测量温区为80—300K).实验结果表明,水分子和乙醇分子的进入均使样品的电导率升高.利用电荷能量限制隧道模型结合纳米管粉末压片的结构特点,认为样品电阻主要来源于纳米管间接触电阻.水或乙醇分子在纳米管聚苯胺中通过与分子链的相互作用,增加了链间与链上非局域化载流子的数量,增大管间接触界面,降低了载流子的隧穿势垒,进而提高了导电能力.但水和乙醇对样品导电性质影响程度是不同的,主要是因为水分子和乙醇分子在结构和物理化学性质上的不同.
关键词:
聚苯胺
纳米管
电阻率 相似文献
3.
This paper studies the electronic transport in an individual helically twisted CdS nanowire rope, on which platinum microleads are attached by focused-ion beam deposition. The current-voltage (I - V) characteristics are nonlinear from 300 down to 60 K. Some step-like structures in the I - V curves and oscillation peaks in the differential conductance (dI/dV - V) curves have been observed even at room temperature. It proposes that the observed behaviour can be attributed to Coulomb-blockade transport in the one-dimensional CdS nanowires with diameters of 6-10 nm. 相似文献
4.
Results of charge-transport and magnetic measurements of nanotubular polyaniline (PANI) composites containing Fe_3O_4 nanoparticles (~10nm) synthesized by a "template-free" method are reported. The T^{-1/2} resistivity has been observed, and dc magnetic susceptibility data are fitted to an equation χ=χ^*_P+C/T. With increasing weight ratio of Fe_3O_4, the electrical conductivity and temperature- independent susceptibility χ^*_P increase, and the Curie-type susceptibility is suppressed at low temperatures. Further discussions have been given. The PANI-H_3PO_4/Fe_3O_4 composite containing 27wt% of Fe_3O_4 nanoparticles is superparamagnetic, exhibiting very little hysteresis even at 5K. 相似文献
5.
We report the current-voltage (I-V) characteristics of individual polypyrrole nanotubes and poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires in a temperature range from 300 K to 2 K. Considering the complex structures of such quasi-one-dimensional systems with an array of ordered conductive regions separated by disordered barriers, we use the extended fluctuation-induced tunneling (FIT) and thermal excitation model (Kaiser expression) to fit the temperature and electric-field dependent I–V curves. It is found that the I–V data measured at higher temper-atures or higher voltages can be well fitted by the Kaiser expression. However, the low-temperature data around the zero bias clearly deviate from those obtained from this model. The deviation (or zero-bias conductance suppression) could be possibly ascribed to the occurrence of the Coulomb-gap in the density of states near the Femi level and/or the enhancement of electron-electron interaction resulting from nanosize effects, which have been revealed in the previous studies on low-temperature electronic transport in conducting polymer films, pellets and nanostructures. In addition, similar I-V characteristics and deviation are also observed in an isolated K0.27MnO2 nanowire. 相似文献
6.
Electrospun cerium nitrate/polymer composite fibres: synthesis, characterization and fibre-division model 下载免费PDF全文
Cerium (Ⅲ) nitrate/poly(vinylpyrrolidone) (Ce(NO3)3/PVP) composite fibres have been prepared by electrospinning. After calcining the composite fibres in air at 500℃,CeO2 nanowires were obtained. The characterizations of the as-spun composite fibres and resultant nanowires have been carried out by a scanning electron microscope (SEM),an infrared spectrometer,an x-ray diffractometer and a fluorescence spectrophotometer. Interestingly,some unusual ribbon-like or twin fibres were observed besides the common fibres with circular or elliptic cross sections. We developed a fibre-division model resulting from Coulomb repulsion and solvent vaporization to interpret the formation of the ribbons or twin fibres,which has been confirmed by the SEM studies. Our results also indicate that the formation of the ribbons or twin fibres is less dependent on operation voltage and work distance. 相似文献
7.
Rectifying effect of heterojunction fabricated in freestanding thin film of polyaniline containing azobenzene side-chain 下载免费PDF全文
An innovative heterojunction is fabricated between two sides of a
freestanding thin film of HCl-doped polyaniline (PANI) derivative
containing azobenzene side-chain, which is synthesized through an
N-alkyl-substituted reaction. Of the film, the side with being
irradiated by UV light during preparation is represented as `A
side'; the other side without being irradiated is represented as
`N side'. The electrical properties of the heterojunction are
measured and the rectifying effect is observed in the
{current--voltage} characteristic curves with the values of
rectifying ratio (γ) being 20 at ±0.06 V at T= 77K
and 4 at ±0.02V at T=300 K separately. 相似文献
8.
Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites 下载免费PDF全文
This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes. 相似文献
9.
10.
研究了用自组装法制备的质子酸掺杂的纳米管结构聚苯胺的电阻率(ρ)和磁化率随温度变化的依赖关系,讨论了质子酸掺杂浓度、不同对阴离子以及苯胺单体与质子酸聚合时反应浓度对纳米管结构聚苯胺电学性质的影响.实验结果表明,lnρ和T-1/2呈线性关系,不同对阴离子对聚苯胺的电阻率影响很大,随着质子酸掺杂浓度以及苯胺单体与质子酸聚合时反应浓度的增大,聚苯胺的电阻率明显减小;而且,其磁化率可以表示为与温度无关的泡利顺磁性和符合居里定律的顺磁性之和. 相似文献