有机/LRH复合体的合成及荧光性质研究

通过均匀沉淀法制备了硝酸根型层状铕氢氧化物（NO3--LEuH）,采用离子交换法将层间阴离子NO3-交换为苯丙氨酸（PHE）,得到了PHE/LRH复合体,并研究了其荧光性质.前躯体和复合体均有Eu3＋的5 D0-7FJ跃迁发射峰,在室温下发射出Eu3＋的特征红光,发射光谱峰位基本一致,但与NO3--LEuH相比,PHE/LRH复合体的发射峰强度大大减弱,表明将PHE引入LEuH层间对Eu3＋的荧光有猝灭作用.     

窄线SeyfertⅠ型星系

本文将概述窄线SeyfertⅠ型星系 (包括具有类似性质但光度较大的类星体 )的主要观测特征、物理内涵及其理论解释和在活动星系核内部结构上的反映。窄线SeyfertⅠ型星系 (NLS1 ,以后NLS1都认为包括NLSI星系和NLS1类星体 )具有窄的允许线Hβ,它兼有Sy1和Sy2的某些特征。它具有强的FeⅡ光学线和弱的 [OⅢ ]λ5 0 0 7禁线 ,这明显不同于Sy2。在观测相关量的主成分统计分析中表明NLS1是活动星系核第一主向量表现为极端的一类。这包括 :( 1 )HβFWHM取极小 ;( 2 )FeⅡλ45 70 /Hβ 取极大 ;( 3)SⅢ ]λ1 892 /CⅢ ]λ1 90 9取极大 ,亦一定范围内宽线区电子密度取大值 ;( 4 )CⅣλ1 5 4 9线中心蓝移取极大 ;( 5 )高光度NLS1的软X射线光子数谱指数Γx 取极大 ;( 6)X射线相对流量变化方差最大等。基于以上观测结构和相应统计规律 (观测量与HβFWHM的关系 ) ,解释NLS1现象最佳的模型是高相对吸积率L/LEdd模型。NLS1比之典型宽线活动星系核具有较低的中心黑洞质量MBH。进一步 ,还发现这一模型是活动星系核主...     

固体微/纳米尺度传热理论研究进展

随着半导体技术的飞速发展,器件的尺寸已进入到微/纳米尺度。由于量子效应、表面及界面效应,使得微尺度下的热物性与宏观尺度下有了明显的区别。人们针对微观传热领域的特点,发展了声子玻尔兹曼传输方程、分子动力学等方法,取得了一定的成果,但仍存在不少问题。一些基础概念问题,特别是非平衡态下的局域温度的定义,有待澄清。本文主要回顾近年来微/纳米尺度传热在理论和数值模拟方面的进展,以及目前所面临的挑战和问题。     

空心光束的产生及其在现代光学中的应用

近年来,随着激光应用技术的发展,各种中心强度为零的激光束被相继产生,并正在形成一个新颖的所谓空心光束(也称暗中空光束)的大家族。作为激光导管、光学镊子(光钳)和光学扳手,空心光束在微观粒子(如微米粒子、纳米粒子、自由电子、生物细胞和原子或分子等)的精确、无接触操纵和控制中有着广泛的应用。本文将首先给出空心光束的定义及其参数,并详细介绍各种空心光束产生的基本原理、方法及其实验结果。其次,就空心光束的分类及其应用场合进行了简单归纳与讨论。最后就空心光束在微观粒子(包括微米粒子、纳米粒子、生物细胞和自由电子等)的光学囚禁与操控中的应用进行简要综述,并就空心光束的产生与应用及其未来研究与应用前景进行了简短总结与展望。     

Study of radiation background at the north crossing point of the BEPCⅡ in collision mode

Understanding the radiation background at the north crossing point (NCP) in the tunnel of BEPCII is crucial for the performance safety of the High Purity Germanium (HPGe) detector, and in turn of great significance for long-term stable running of the energy measurement system. Therefore, as the first step, a NaI(Tl) detector is constructed to continuously measure the radiation level of photons as background for future experiments. Furthermore, gamma and neutron dosimeters are utilized to explore the radiation distribution in the vicinity of the NCP where the HPGe detector will be located. Synthesizing all obtained information, the shielding for neutron irradiation is studied based on model-dependent theoretical analysis.     

极化(e,2e)碰撞电离的研究进展

传统（ｅ,２ｅ）谱学已成为研究原子和分子电子结构和电离机制的强有力工具之一,本文首先简要回顾了迄今国内外传统（ｅ,２ｅ）谱学研究的历史和现状。然后,再重点介绍近几年开展极化（ｅ,２ｅ）碰撞电离研究的进展。     

Synthesis and antibacterial activity of ethyl 2-amino-6-methyl-5-oxo- 4-aryl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carboxylate

The three-component reaction of 4-hydroxy-1-methyl-2(1H)-quinolinone, aromatic aldehydes and ethyl cyanoacetate was carried out in the presence of a catalytic amount of 4-dimethyl aminopyridine(DMAP) in aqueous ethanol. The reactions result in the formation of pyranoquinoline derivatives in excellent yields. Antibacterial activity has been evaluated against Gram positive and Gram negative bacteria for some of the synthesized compounds. The results indicated that these compounds are moderately effective against bacterial growth and their effectiveness is highest against Pseudomonas aeruginosa.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.