排序方式: 共有125条查询结果,搜索用时 78 毫秒
21.
制作了底栅极顶接触有机薄膜晶体管器件,60 nm的pentacene被用作有源层,120 nm热生长的SiO2作为栅极绝缘层.通过采用不同自组装修饰材料对器件的有源层与栅极绝缘层之间的界面进行修饰,如octadecyltrichlorosilane (OTS),phenyltrimethoxysilane (PhTMS),来比较界面修饰层对器件性能的影响.同时对带有PhTMS修饰层的OTFTs器件低栅极电压调制下的场效应行为及其载流子的传输机理进行研究.结果得到,当|V
关键词:
有机薄膜晶体管
自组装单分子层
场效应迁移率
低栅极调制电压 相似文献
22.
Synthesis of ZnO quantum dots and their agglomeration mechanisms along with emission spectra based on ageing time and temperature 下载免费PDF全文
The ZnO quantum dots (QDs) were synthesized with improved chemical solution method. The size of the ZnO QDs is exceedingly uniform with a diameter of approximately 4.8 nm, which are homogeneously dispersed in ethanol. The optical absorption edge shifts from 370 nm of bulk material to 359 nm of QD materials due to the quantum size effect, while the photoluminescence peak shifts from 375 nm to 387 nm with the increase of the density of ZnO QDs. The stability of ZnO QDs was studied with different dispersion degrees at 0 ℃ and at room temperature of 25 ℃. The agglomeration mechanisms and their relationship with the emission spectra were uncovered for the first time. With the ageing of ZnO QDs, the agglomeration is aggravated and the surface defects increase, which leads to the defect emission. 相似文献
23.
作为下一代固态照明光源,白光有机电致发光二极管(white organic light-emitting diodes, WOLEDs)由于其高效、节能、环保等特点,已经引起了广泛的关注,将其用做照明光源的研究和应用也取得了长足的发展。文中首先简述了WOLEDs的发光原理,总结了目前常见的WOLEDs的结构和常用的发光材料,重点介绍了多发射层白光器件、多重掺杂单发射层白光器件、基于激基缔合物和激基复合物发射的白光器件、p-i-n结构的白光器件等器件结构的发光机理及其优缺点。本文依据WOLEDs高效率、高亮度、高显色性、长寿命的实用条件,详细解释了器件效率,色纯度,相关色温和器件寿命等性能评价标准。我们还分析了WOLEDs目前亟需解决的技术瓶颈,并针对器件效率和器件寿命两个主要方面提出了相应的改善方案。介绍了世界上照明用WOLEDs各公司的研究进展并对其市场前景做出了展望。 相似文献
24.
LED蓝光泄露安全性研究 总被引:5,自引:0,他引:5
研究了LED照明器件的蓝光特性。针对我国的LED照明现状,通过测试LED照明器件的光谱成分,根据现行国内外标准GB/T 20145—2006/CIE S009/E:2002和IEC62471:2006,以及CTL-0744_2009-laser决议,分析了LED光生物安全性,给LED照明灯具制造和相关安全性标准、法律制定提供参考。LED中蓝光的辐亮度值低于100 W·m-2·Sr-1时对人眼属于无危害类型,正常使用情况下不会对人眼造成伤害,但是应该注意对特殊人群(小孩)的保护,避免长时间直视光源。灯具富蓝化也会影响人的作息规律,因此色温4 000 K以下,显色指数80的LED灯具适合在室内使用,同时还要根据不同的使用距离选择不同的参数的灯具。 相似文献
25.
Performance improvement of MEH-PPV:PCBM solar cells using bathocuproine and bathophenanthroline as the buffer layers 下载免费PDF全文
In this work, bathocuproine (BCP) and bathophenanthroline (Bphen), commonly used in small-molecule organic solar cells (OSCs), are adopted as the buffer layers to improve the performance of the polymer solar cells (PSCs) based on poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction. By inserting BCP or Bphen between the active layer and the top cathode, all the performance parameters are dramatically improved. The power conversion efficiency is increased by about 70% and 120% with 5-nm BCP and 12-nm Bphen layers, respectively, when compared with that of the devices without any buffer layer. The performance enhancement is attributed to BCP or Bphen (i) increasing the optical field, and hence the absorption in the active layer, (ii) effectively blocking the excitons generated in MEH-PPV from quenching at organic/aluminum (Al) interface due to the large band-gap of BCP or Bphen, which results in a significant reduction in series resistance (Rs), and (iii) preventing damage to the active layer during the metal deposition. Compared with the traditional device using LiF as the buffer layer, the BCP-based devices show a comparable efficiency, while the Bphen-based devices show a much larger efficiency. This is due to the higher electron mobility in Bphen than that in BCP, which facilitates the electron transport and extraction through the buffer layer to the cathode. 相似文献
26.
磷光材料由于可以利用电致激发所形成的单重态和三重态激子,因而可以得到接近100%的内量子效率。文章对常温下基于磷光材料Ir(ppy)3及Ir(piq)3掺杂PVK薄膜为发光层的器件的光学和电学特性进行了研究。光致发光的结果显示相同掺杂质量比下由PVK到Ir(piq)3的能量传递比到Ir(ppy)3更加困难。通过研究两种掺杂体系不同质量比的电致发光特性,可以认为这两种磷光器件的发光主要来自于磷光客体分子直接俘获载流子发光而非主体的能量传递。Ir(piq)3掺杂体系对掺杂比例的依赖更为明显,从能级结构分析,认为是由于Ir(piq)3的更低的HOMO及高的LUMO能级,而比Ir(ppy)3具有更好的载流子俘获和传输特性。 相似文献
27.
Absorption is the origin of luminescence. But it must be noticed that the
lifetime of luminescence might reversely influence the rate of
absorption. In this paper, it is reported that the luminescence intensity of copper and manganese changes with the driving frequency at constant voltage.The variation of luminescent intensity depends only on the lifetime of luminescence but not on the type of quenching or other factors. Generally the rate of absorption is dominantly determined by the material property and the lifetime of luminescence centres, the absorption of shorter lifetime centre will be larger than that of the longer lifetime centre at the same excited condition. 相似文献
28.
基于在聚合物中掺杂染料DCJTB的白色有机电致发光器件 总被引:1,自引:0,他引:1
将Alq3和DCJTB作为掺杂物与基质PVK按照不同比例混合共溶,旋涂成膜,制备了PVK∶Alq3∶DCJTB为发光层的结构为ITO/ PVK∶Alq3∶DCJTB/ BCP/Alq3/LiF/Al的器件,其中Alq3和BCP分别用作电子传输层和空穴阻挡层,PVK用作蓝光发光层和空穴传输层。保持PVK和DCJTB的质量比为100∶1不变,改变PVK和 Alq3的质量比,当PVK和Alq3的质量比为20∶1时,得到了效果较好的白光。器件在电压为14 V时,色坐标达到(0.33,0.36),在10~14 V范围内变化甚微。 相似文献
29.
采用金属氧化物电子传输层(ETL)的聚合物光伏器件在制备完成之初通常性能表现低下, J-V曲线呈异常“S”形. 当器件受白光持续照射后, 该不良状况会逐渐好转, 此过程称为光浴(light-soaking). 光浴现象普遍被认为是ETL界面问题所致. 从器件结构着手, 研究了ZnO 纳米颗粒ETL相邻的两个界面在光浴问题上的作用. 制备了功能层相同的(电极除外)正型、反型器件及复合ETL结构器件, 发现光浴现象仅出现于包含ZnO/ITO界面的反型器件中, 证明该界面是导致光浴现象的主要原因. 分析认为: ZnO颗粒表面O2吸附形成的电子陷阱增加了ITO/ZnO势垒厚度, 使得光生电子无法逾越而成为空间电荷积累, 从而导致器件初始性能不佳. 器件经光照后, ETL内部受激而生的空穴电子对填补了ZnO缺陷, 提升了ETL的电荷选择性并减小了界面势垒厚度, 被束缚的光生电子得以隧穿至ITO电极, 反型器件性能最终得以改善. 相似文献
30.
本文以Be(PP)2为发光层、水溶性酞菁铜(WS-CuPc)为空穴注入层、NPB为空穴传输层,制备了结构为ITO/WS-CuPc/NPB/Be(PP)2/LiF/Al的蓝色有机发光二极管(OLEDs).研究了WS-CuPc不同旋涂转速对器件性能的影响.并在WS-CuPc最佳旋涂转速的基础上,进一步研究了WS-CuPc薄膜不同退火方式对器件性能的影响.实验中,对WS-CuPc层采用了一种新的退火方式,即对ITO玻璃衬底先加热后旋涂WS-CuPc层,并与传统退火方式
关键词:
水溶性CuPc
蓝色有机电致发光
旋涂转速
退火方式 相似文献