| 水溶性CuPc旋涂转速及退火方式对蓝色有机电致发光器件性能的影响 |
| |
| 引用本文： | 高利岩,赵谡玲,徐征,张福俊,孙钦军,张天慧,闫光,徐叙瑢.水溶性CuPc旋涂转速及退火方式对蓝色有机电致发光器件性能的影响[J].物理学报,2011,60(3):37203-037203. |
| |
| 作者姓名： | 高利岩 赵谡玲 徐征 张福俊 孙钦军 张天慧 闫光 徐叙瑢 |
| |
| 作者单位： | 北京交通大学光电子技术研究所,北京交通大学发光与光信息技术教育部重点实验室,北京 100044 |
| |
| 基金项目： | 国家自然科学基金(批准号:10974013,10804006,10774013),教育部博士点基金(批准号:20090009110027,20070004024),北京市自然科学基金(批准号:1102028),国家杰出青年科学基金(批准号:60825407),国家重点基础研究发展计划(批准号:2010CB327705),优秀博士生科技创新基金(批准号:141106522)资助的课题. |
| |
| 摘 要： | 本文以Be(PP)2为发光层、水溶性酞菁铜(WS-CuPc)为空穴注入层、NPB为空穴传输层,制备了结构为ITO/WS-CuPc/NPB/Be(PP)2/LiF/Al的蓝色有机发光二极管(OLEDs).研究了WS-CuPc不同旋涂转速对器件性能的影响.并在WS-CuPc最佳旋涂转速的基础上,进一步研究了WS-CuPc薄膜不同退火方式对器件性能的影响.实验中,对WS-CuPc层采用了一种新的退火方式,即对ITO玻璃衬底先加热后旋涂WS-CuPc层,并与传统退火方式
关键词：
水溶性CuPc
蓝色有机电致发光
旋涂转速
退火方式
|
| 关 键 词： | 水溶性CuPc 蓝色有机电致发光 旋涂转速 退火方式 |
| 收稿时间： | 2010-06-24 |
| 修稿时间： | 8/2/2010 12:00:00 AM |
Influence of spin-coating rate and annealing method of water-soluble CuPc on blue organic light-emitting devices performance |
| |
| Gao Li-Yan,Zhao Su-Ling,Xu Zheng,Zhang Fu-Jun,Sun Qin-Jun,Zhang Tian-Hui,Yan Guang,Xu Xu-Rong.Influence of spin-coating rate and annealing method of water-soluble CuPc on blue organic light-emitting devices performance[J].Acta Physica Sinica,2011,60(3):37203-037203. |
| |
| Authors: | Gao Li-Yan Zhao Su-Ling Xu Zheng Zhang Fu-Jun Sun Qin-Jun Zhang Tian-Hui Yan Guang Xu Xu-Rong |
| |
| Institution: | Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China;Institude of Optoelectronics Technology, Beijing Jiaotong University, Key Laboratory of Luminescence and Optical Information (Beijing Jiaotong University), Ministry of Education, Beijing 100044,China |
| |
| Abstract: | Investigated in this work are the effects of the spin-coating rate of water-soluble copper phthalocyanine (WS-CuPc) and the annealing method of WS-CuPc films obtained at the optimal spin-coating rate on the performances of blue organic light-emitting devices (OLEDs). The OLEDs, eack with a configuration of ITO/WS-CuPc/NPB/Be(PP)2/LiF/Al, are fabricated by using WS-CuPc as hole injection layer, NPB as hole transport layer and Be(PP)2 as emission layer separately. In our experiments, a new annealing method of WS-CuPc is used first for heating the ITO glass, and then for spin-coating the WS-CuPc. The performances of the device prepared with the new annealing method are compared with those of the devices prepared with the traditional annealing method or no annealing treatment. And the effects of different annealing treatments on the surface topography are analyzed by atomic force microscope (AFM). The experimental results demonstrate that there exists an optimal spin-coating rate of WS-CuPc, about 3000 r/min. Based on the optimal spin-coating rate of WS-CuPc, the roughness of the film prepared with the new annealing method is lowest and the performances of the device are best. |
| |
| Keywords: | water-soluble copper phthalocyanine blue organic light-emitting devices spin-coating rate annealing method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《物理学报》浏览原始摘要信息 |
| 点击此处可从《物理学报》下载免费的PDF全文 |
|
