辊速辊温对高密度聚乙烯拉伸微孔膜及其片晶结构的影响

采用熔融挤出片材—退火—冷拉伸—热拉伸—热定形的方法来制备高密度聚乙烯(HDPE)微孔膜,利用FTIR、SEM和DSC等测试方法来研究辊速辊温对HDPE拉伸微孔膜及其片晶结构的影响.研究结果表明,所选树脂的分子量、分子量分布以及弛豫时间能够满足现有加工条件,形成片晶取向度较高的预制膜;在相同辊温下,随辊速增加,退火前预...     

燃料电池用聚乙烯醇基碱性聚合物电解质膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇(PVA)、聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)和聚乙烯醇/聚乙二醇二甲醚(PVA/PEGDE)碱性聚合物电解质膜详细考察了膜的外观形貌、微观结构、热稳定性、离子电导率和化学稳定性等.结果表明,PVA与PVP以及PEGDE具有很好的相容性,所制备的复合膜断面致密...     

聚烯烃复合材料的老化行为及机理研究

复合材料的耐久性是一个重要的科学和技术问题,其中牵涉的问题很多还都没有得到充分的研究.首先是聚合物本身的稳定性及其影响因素;然后是无机填料和聚合物的相互作用在复合材料的老化过程中的表现,以及无机填料的表面处理对这种相互作用的影响;此外,还需要考虑光氧化降解在空间分布上的不均匀性.本文从这些方面出发,综述了国内外近年来在...     

耐热聚乙烯管专用料的结构特点和研究进展

介绍了耐热聚乙烯管的应用和耐热聚乙烯管专用料的结构特点和基本参数,同时综述了国内外在耐热聚乙烯管和耐热聚乙烯管专用料的研究状况,并对市场上PE-RT专用料的性能进行了总结。     

聚谷氨酸接枝聚乙二醇@碳酸钙遮蔽体系用于提高聚乙烯亚胺基因转染效率

设计并合成了聚谷氨酸-聚乙二醇@碳酸钙(PPG@CaCO₃)纳米遮蔽体系, 用于遮蔽聚乙烯亚胺(PEI). 一方面, 聚谷氨酸-聚乙二醇(PPG)可以降低PEI引起的细胞毒性, 更有利于体内应用; 另一方面, CaCO₃可有效改善PPG导致的转染效率下降, 并在一定程度上提高PEI的细胞转染效率. 对比遮蔽体系PPG@CaCO₃和聚谷氨酸-聚乙二醇@磷酸钙[PPG@Ca₃(PO₄)₂]发现, PPG@CaCO₃在微酸性环境中释放二氧化碳气体是提高细胞转染效率的关键因素. 小鼠体内循环实验表明, PPG@CaCO₃遮蔽体系可以增加载体在血液中的循环时间. 因此, PPG@CaCO₃遮蔽体系对于改善阳离子类基因载体的体内应用起到重要作用.     

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

利用新的单中心Ziegler-Natta(Z-N)催化剂,通过干预分子链的生长与聚集行为,可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂.本研究利用这类低缠结UHMWPE,通过设置不同的烧结温度(Ts)来改变熔体缠结状态,并探讨了链缠结程度对烧结制品结构与性能的影响.实验结果表明TS=220℃下,UHMWPE样品发生显著的复缠,造成高缠结度;而Ts=170℃下,初始低缠结状态能够得以充分保留,从而获得了缠结度具有明显差别的不同样品.示差扫描量热法(DSC)测试表明,在Ts=170℃下,低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141℃)晶体与高的结晶度(最高达65%).力学测试表明低缠结度制品的综合力学性能显著提升,其中屈服强度提高72%,拉伸断裂强度提升139%,弹性模量提升162%以及断裂伸长率提升36%,实现了同时增强增韧.这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.     

表面活性剂对LiNi0.80Co0.15Al0.05O2的结构和性能影响

在共沉淀过程中添加表面活性剂聚乙二醇(PEG)或聚乙烯吡咯烷酮(PVP)分别合成类球形Ni_(0.80)Co_(0.15)Al_(0.05)(OH)_2前驱体,再与氢氧化锂(LiOH·H_2O)氧化煅烧得到LiNi_(0.80)Co_(0.15)Al_(0.05)O_2(NCA)三元正极材料。利用X射线衍射(XRD)、扫描电镜(SEM)、透射电子显微镜(TEM)、循环伏安(CV)、交流阻抗(EIS)和充放电循环测试等对材料的结构、形貌、电化学性能等进行表征。结果表明:PEG和PVP的添加不影响材料中Ni、Co和Al元素的比例,能够促进一次晶粒长大和提高振实密度,能够促进正极材料层状结构发育进而提高正极材料的电化学性能。添加PEG、添加PVP和未添加表面活性剂合成正极材料的振实密度分别为2.07、1.86和1.40 g·cm~(-3),在0.2C充放电过程中首次放电比容量分别为210.8、188.9和173.0 mAh·g~(-1),以0.2C充电1C放电循环100次后电池容量保持率分别为78.8%、93.2%和82.7%,添加PEG和PVP的NCA材料表现出良好的电化学性能。     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.     

可控/“活性”自由基聚合制备聚乙烯及聚卤代烯烃

可控/“活性”自由基聚合(CLRP)可以用于制备分子量分布窄、分子链缺陷少的聚合物,如聚乙烯(PE)、聚氯乙烯(PVC)、聚偏氯乙烯(PVDC)和聚偏氟乙烯(PVDF),且易控制上述单体与其他单体共聚得到嵌段聚合物。本文调研了近年来可控/“活性”自由基聚合(如碘转移聚合(ITP)、氮氧稳定自由基聚合(NMP)、可逆加成断裂链转移(RAFT)聚合和金属催化的活性自由基聚合(OMRP)等)制备聚乙烯和聚卤代烯烃等方面的工作,并指出了未来的发展方向。