碳纳米球/聚乙烯复合物的制备与表征

以碳纳米球为载体,经格氏试剂处理后,与TiCl4反应制成负载型Ziegler-Natta催化剂,在AlEt3存在下,催化乙烯聚合,原位制备聚乙烯(PE)/碳纳米球(CSs)复合物,催化剂活性达5.7×106gPE/(molTi·h),聚乙烯分子量为4.9×105.HRTEM和SEM结果表明,常压聚合条件下聚乙烯/CSs复合物为核-壳结构,颗粒呈圆形,直径约为1μm左右,复合物颗粒中包含碳纳米球.介电分析结果表明,由于碳纳米球的引入,复合物的介电性能相较于普通聚乙烯有明显的提高,从而提高了聚乙烯的抗静电性能,且介电常数和介电损耗都随着聚合时间的延长而降低.此外,采用WAXD,DSC和TGA表征了PE/CSs复合物的结晶性能和热性能,结果表明聚乙烯/CSs复合物具有好的结晶性能和热稳定性能.     

含磷钼酸的超分子复合材料的制备和结构研究

介绍了一类端基含羧基结构的液晶性表面活性剂CDDA通过静电相互作用与磷钼酸(HPMo)进行复合,得到表面包覆柔性烷基链和羧基端基的复合物SEP-PMo,并通过元素分析、热失重等方法确认其化学结构.该复合物表现出稳定的液晶相,DSC,PLM,SAXS和TEM等研究表明其为层状相结构.进一步将SEP-PMo复合物与P4VP混合,通过羧基与吡啶环上氮的氢键相互作用,得到稳定的PMo和聚合物的复合物,同时对比研究了HPMo与P4VP直接共混后的静电复合物结构,表明经表面活性剂修饰后的PMo可在聚合物中保持其聚集态结构.     

聚乙烯吡啶树脂对富马酸的吸附性能研究

通过静态吸附实验,研究了聚乙烯吡啶树脂(PVP)对富马酸的吸附性能。结果表明,该树脂对富马酸的吸附等温线同时满足Langmuir和Freundlich等温吸附方程;在无机盐存在下,与大孔强碱性树脂D204、弱碱树脂D308相比,PVP吸附富马酸的性能几乎不受无机盐的影响。D204树脂吸附富马酸是离子交换作用,D308树脂通过Lewis作用和静电作用吸附富马酸,而PVP树脂对富马酸的吸附行为是氢键所致,吸附为放热过程且能够自发进行。     

2-亚胺吡啶镍配合物的合成、晶体结构及催化乙烯聚合

经过一系列化学反应,在吡啶环上引入特丁基及甲醛基,再与2,6-二异丙基苯胺反应生成2-(N-2,6-二异丙基苯亚氨基)亚甲基-6-特丁基吡啶(g)配体,并合成了相应的配合物[NiBr2(g)](h)。配合物h的单晶结构表明其为单配体单金属结构,属于正交晶系,a=1.527 76(14)nm,b=1.608 46(15)nm,c=1.837 77(17)nm,晶胞体积4.516 0(7)nm3,Z=8。在助催化剂MAO的作用下,考察了催化乙烯聚合特性,在0℃时,所得聚合产物中包括支化聚合物和齐聚物,其中支化聚合物的分子量Mw=1.09×104,其支链大部分为甲基、丁基和长支链,支链密度为58.5。     

内含C_(60)掺杂空穴传输层的量子点电致发光器件

聚乙烯咔唑(PVK)中掺入富勒烯(C60)的重量比从0%到10%变化,以研究在空穴传输层中掺杂C60后对量子点电致发光器件性能的影响。掺入C60后的PVK薄膜在氧化铟锡(ITO)基底上均方根粗糙度从3 nm降至1.6 nm。另外,掺入C60后有利于空穴的注入和传输,改善器件中电子和空穴的平衡,提高了器件的效率。     

Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Lithium ion conduction and ion-polymer interaction in poly（vinyl pyrrolidone） based electrolytes blended with different plasticizers

Poly（ethylene oxide）, poly（vinyl pyrrolidone）（PEO/PVP）, lithium perchlorate salt（Li Cl O4） and different plasticizer based, gel polymer electrolytes were prepared by the solvent casting technique. XRD results show that the crystallinity decreases with the addition of different plasticizers. Consequently, there is an enhancement in the amorphousity of the samples responsible for the process of ion transport. FTIR spectroscopy is used to characterize the structure of the polymer and confirms the complexation of plasticizer with host polymer matrix. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. Among the various plasticizers, the ethylene carbonate（EC） based complex exhibits a maximum ionic conductivity value of the order of2.7279 10 4S cm 1. Thermal stability of the prepared electrolyte films shows that they can be used in batteries at elevated temperatures. PEO（72%）/PVP（8%）/Li Cl O4（8%）/EC（12%） has the maximum ionic conductivity value which is supported by the lowest optical band gap and lowest intensity in photoluminescence spectroscopy near 400–450 nm. Two and three dimensional topographic images of the sample having a maximum ionic conductivity show the presence of micropores.     

Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

低聚乙烯链在碳纳米管侧壁上的图案化吸附

碳纳米管（CNTs）自1991年被发现以来,已经在各个领域,尤其是在材料领域被深入研究．CNT作为添加剂与高分子形成的复合材料已被大量的制备并报道．实验室制备的CNTs中,含有5-7缺陷对的CNTs占很大一部分．Chico等引入5-7缺陷对将不同的CNTs连接起来形成类二极管的异质结．目前,对含有异质结的CNTs的研究大都停留在CNTs本身的结构与电学性质的研究上．而在材料领域对其与高分子形成复合材料的研究非常少．用理论的方法从原子角度来研究含有异质结的CNTs／高分子复合材料具有实际意义．