CdSe/CdS/SiO2复合纳米球的制备及发光性能

采用两相法合成了CdSe/CdS核-壳结构的量子点, 用氨水催化水解正硅酸乙酯制得复合结构的CdSe/CdS/SiO₂发光纳米球. 通过对量子点用量、氨水用量、反应时间及溶剂比例等实验条件的调节, 得到了单分散性较好, 尺寸在23~145 nm的复合发光纳米球. 利用紫外-可见吸收光谱和荧光发射光谱对其发光性能进行了研究, 同时利用透射电镜(TEM)观察复合纳米球的形貌. 结果表明, 复合发光纳米球样品的最高荧光量子产率可达8%.     

模板法室温合成CdS纳米棒

模板法室温合成CdS纳米棒;模板法;硫化镉;一维CdS纳米材料     

水相法制备CdS纳米棒

水相法制备CdS纳米棒;cds纳米棒;水相溶液;晶体生长;乙二胺     

微观结构对溶胶-凝胶法合成的La0.67Sr0.33MnO3电磁性能影响

采用溶胶-凝胶法制备了不同烧结温度的钙钛矿类锰氧化物La0.67Sr0.33MnO3样品。实验结果表明,在1573 K以上烧结的样品,晶粒出现异常长大,晶界效应明显。随着烧结温度的提高,磁化强度逐渐增大,但样品的居里温度基本不变。此外,在1173和1573 K温度下烧结的样品,均出现了低于居里温度的金属-半导体导电行为转变。在合适的烧结条件下,可以观察到隧道磁电阻(TMR)和超大磁电阻(CMR)2种磁电阻效应。实验表明,自旋电子的输运,不仅与样品平均粒径的大小和密度有关,而且与晶界的微观结构有密切关系。     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Influence of mixed common solvent on the co-assembled morphology of PS-<Emphasis Type="Italic">b</Emphasis>-PEO and CdS quantum dots

The hybrid structures of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer and inorganic nanoparticles with good stability and biocompatibility have potential applications in drug delivery and bioimaging. Spherical co-assemblies of PS₁₂₀-b-PEO₃₁₈ and oleylamine-capped CdS quantum dots (QDs) are produced successfully in this work by adding water to a mixed common solvent, such as N,N-dimethylmethanamide (DMF)/chloroform, DMF/tetrahydrofuran (THF), or DMF/toluene. The energy dispersive X-ray (EDX) spectrum indicates that QDs are located at the interface between the core and shell of the spherical co-assemblies. The co-assembly process during water addition is traced by transmission electron microscopy (TEM) and turbidity measurement. Spherical co-assemblies are formed through budding from bilayers of the block copolymer and QDs. The morphology of the co-assemblies is related to the miscibility of the QD-dispersing solvents with water and the morphology changes from a spherical to a vesicle-like structure with DMF/toluene. Increasing THF content in the mixed solvent causes morphological transitions from spherical co-assemblies to multi-branched cylinders and micelles where QDs are located in the central core. Increasing chloroform content yields vesicle-like structures with protruding rods on the surface. The mechanism of the morphological transitions is also discussed in detail.     

凝胶色谱与多角激光光散射联用研究聚氧化乙烯的扩展效应和链构象

采用凝胶色谱与多角激光光散射联用的方法,测定了一系列不同分子量的聚乙二醇(PEG)和聚氧化乙烯(PEO)在色谱柱中的扩展效应.扩展因子随PEG/PEO分子量的增加而增大,经扩展效应改正后得到了样品的准确分子量和分子量分布.同时建立了PEO的Z均回转半径Rgz与重均分子量Mw之间的单分散标度关系:Rgz=0.0272 Mw0.56,结果表明,长链PEO在水溶液中由于排除体积效应采取溶胀的无规线团构象.     

定量体积排除色谱测定高分子双水相系统的组成和分子量分布

利用定量体积排除色谱研究葡聚糖-聚乙二醇双水相系统相分离后上下两相中2种高分子组分的含量、分子量和分子量分布.由定量体积排除色谱法得到的两相组成(即系线端点)与用浊点滴定法得到的浊点曲线几乎完全重合,二者仅在靠近临界点的聚乙二醇富集相有一定偏差.同时,利用体积排除色谱测得两相中葡聚糖和聚乙二醇的分子量和分子量分布.结果表明,由系线端点得到的体系两相共存线与浊点曲线的偏差是由于相分离过程中,不同分子量的高分子组分在两相的非均匀分配造成的.聚乙二醇分子量分布较窄,发生相分离后,在两相的分子量和分子量分布相差不大.而葡聚糖分子量分布较宽,在相分离后两相中的分子量和分子量分布具有较大差异,即葡聚糖组分在葡聚糖富集相中的分子量显著高于其在聚乙二醇富集相中的分子量.随着葡聚糖-聚乙二醇体系初始浓度的增加,两相中葡聚糖的分子量差异变大.定量体积排除色谱可以准确得到高分子双水相系统的相平衡数据及两相中2组分的分子量和分子量分布信息,其结果不仅为深入理解葡聚糖-聚乙二醇-水三元溶液的相平衡提供基础,而且为双水相系统在萃取分离中的应用提供理论指导.     

芳香聚醚酮酮晶体结构及其晶型变化的研究（Ⅰ）

利用Ｘ射线及热分析技术研究了聚醚酮酮（ＰＥＫＫ）的溶剂诱导结晶及从玻璃态结晶和从熔融态结晶的行为。发现ＰＥＫＫ有两种晶型结构（Ⅰ和Ⅱ），晶型Ⅱ的形成与热历史和溶剂诱导有关，其熔点始终低于Ⅰ型１０℃左右。ＰＥＫＫ的低温熔融峰与其分子链极化有关，而与热历史无关，此低温熔融峰热焓占总热焓２％～１０％，其平衡熔点为４０９℃。     

掺杂稀土配合物的无机/高分子纳米杂化薄膜的 制备与发光性能

通过在溶胶-凝胶过程中引入高分子组分,并将稀土配合物掺杂其中的方法得到了具有良好发光性能的无机/高分子杂化薄膜,它们有很好的韧性和透明性,测定了薄膜的荧光光谱和荧光寿命,发现它们均发射出稀土离子的特征荧光且寿命比本体配合物增长。透射电镜的观察表明配合物在SiO~2/高分子互穿网络中分布较均匀,分散尺度在20～30nm之间。