Effect of Fe substitution on the thermal expansion of the highT c superconductor Y1Ba2Cu3O y

Thermal expansion measurements have been carried out on Fe substituted superconducting compounds Y₁Ba₂(Cu_1−x Fe _x )₃O _y (0<x<4%) using a high resolution dilatometer employing the three terminal capacitance technique. The experimental set up is sensitive enough to detect changes in α of less than 10⁻⁸K⁻¹. Results show that the jump Δα in the coefficient of linear thermal expansion at the superconducting transition temperature,T _c, increases almost linearly with Fe concentration. The normal state thermal expansion coefficient α first decreases, attains a minimum value aroundx=1% and then increases for higher Fe concentrations. The oxygen content per unit formula is almost constant up tox=1% and then increases rapidly withx. It has also been observed that the anomalous behaviour of α around 260 K observed by Meingastet al [22] for Fe concentrationx=5% is due to inadequate annealing of the sample.     

相对论激光在Maxwell分布等离子体中产生的高次谐波

 研究了强激光与具有初始速度分布的等离子体作用产生的高次谐波。结果表明，对于Maxwell速度分布的等离子体，由于电子初始时刻的无规则热运动，在一定程度上抹平了辐射功率在谐波谱上的分布，使得高次谐波的辐射增强，低次谐波的辐射有所减弱，有利于高次谐波的产生。     

实Clifford分析中六类拟Bochner-Martinelli型高阶奇异积分的几个问题

本文借助于Ｈａｄａｍａｒｄ关于高阶奇异积分有限部分的思想,研究关于实 Ｃｌｉｆｆｏｒｄ分析中六个类型(含一个奇点或二个奇点的)拟Ｂｏｃｈｎｅｒ－Ｍａｒｔｉｎｅｌｌｉ型高阶奇异积分的归纳定义、Ｈａｄａｍａｒｄ主值的存在性、递推公式、计算公式、微分公式、Ｐｏｉｎｃａｒｅ－Ｂｅｒｔｒａｎｄ置换公式以及拟Ｂ－Ｍ型高阶奇异积分的Ｈｏｌｄｅｒ连续性等问题．这些问题是研究单、多元复分析的学者们在研究奇异积分时,通常要涉及到的几个问题．     

一种四次有理插值样条及其逼近性质

1引言有理样条函数是多项式样条函数的一种自然推广,但由于有理样条空间的复杂性,所以有关它的研究成果不象多项式样条那样完美,许多问题还值得进一步的研究．近几十年来,有理插值样条,特别是有理三次有理插值样条,由于它们在曲线曲面设计中的应用,已有许多学者进行了深入研究,取得了一系列的成果(见[1]-[7])．但四次有理插值样条由于其构造所花费的计算量太大以及在使用上很不方便而让人们忽视了其重要的应用价值,因此很少有人研究他们．实际上,在某些情况下四次有理插值样条有其独特的应用效果,如文[8]建立的一种具有局部插值性质的分母为二次的四次有理样条,即一个剖分     

Electrospinning of ultrahigh‐molecular‐weight polyethylene nanofibers

The electrospinning method has been employed to fabricate ultrafine nanofibers of ultrahigh‐molecular‐weight polyethylene for the first time with a mixture of solvents of different dielectric constants and conductivities. The possibility of producing highly oriented nanofibers from ultrahigh‐molecular‐weight polymers suggests new ways of fabricating ultrastrong, porous, and single‐component nanocomposite fibers with improved properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 766–773, 2007     

一种非连续纳米氧化层自旋阀的显微结构研究

利用高分辨电子显微学方法(HREM)研究了纳米氧化层镜面反射自旋阀多层结构Ta(35nm)Ni80Fe20(2nm)Ir17Mn83(6nm)Co90Fe10(15nm)NOL1Co90Fe10(2nm)Cu(22nm)Co90Fe10(15nm)NOL2Ta(3nm).该自旋阀的巨磁电阻(GMR)效应高达15%,较无此镜面反射纳米氧化层(NOL)的自旋阀提高近1倍,同时交换偏置场亦有所增强.高分辨显微结构分析表明,介于钉扎层与被钉扎层之间的氧化层(NOL1)并未完全氧化,即除氧化过程生成的CoFe氧化物 关键词： 自旋阀 纳米氧化层 高分辨电子显微学 巨磁电阻效应     

大功率高温超导滤波器的设计与功率测试

本文在双面YBCO高温超导薄膜上设计并制备了两节大功率超导滤波器,根据滤波器功率承载能力与最大电流密度之间的关系,减小电流密度和分散电流密度的分布是提高功率承载能力的关键.本文采用增加超导谐振器尺寸、优化几何结构及改进馈线耦合方式的方法,设计了两节2 GHz频段梭型谐振器结构的滤波器.设计及测量结果显示了馈线结构及谐振器几何尺寸优化程度对超导滤波器功率承载能力有不同程度的影响,说明了在大功率超导滤波器设计中应选用无结点间隙耦合式馈线以抑制电流密度的聚集.采用优化后的谐振器结构制备的梭型两节超导滤波器经测试功率承载能力为2 W.超导滤波器的尺寸为25×12 mm LaAlO3基片,中心频率2.022 GHz,相对带宽为2.4%.同时给出了超导滤波器功率测试的结构和方法.     

改进的TESLA式高阶模衰减器的实验研究

讨论了TESLA型高阶模耦合器的改进, 对所设计的改进型TESLA式高阶模耦合器进行实验, 对理论计算与实验结果进行详细分析, 结果表明改进的高阶模耦合器理论计算和实验结果符合得较好.     

Concentration effects in the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide

The monomer concentration for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide was optimized utilizing high‐throughput experimentation methods. Detailed ¹H‐NMR spectroscopic investigations were performed to understand the mechanistic aspects of the observed concentration effects. Finally, the improved polymerization concentration was applied for the synthesis of higher molecular weight (> 10,000 Da) poly(2‐ethyl‐2‐oxazoline)s. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1487–1497, 2005     

Recent study of nanomaterials prepared by inert gas condensation using ultra high vacuum chamber

The ultra high vacuum chamber was developed in the Department of Nuclear Physics, University of Madras with the funding from DST, India. This UHV chamber is used to prepare nanocrystalline materials by inert gas condensation technique (IGCT). Nanocrystalline materials such as PbF₂, Mn²⁺-doped PbF₂, Sn-doped In₂O₃ (ITO), ZnO, Al₂O₃, Ag₂O, CdO, CuO, ZnSe:ZnO etc., were prepared by this technique and characterized. Results of some of these materials will be presented in this paper. In solid-state²⁰⁷Pb NMR on PbF₂ a separate signal due to the presence of grain boundary has been observed. The structural phase transition pressure during the phase transformation from the cubic phase to orthorhombic phase under high pressure shows an increase with the decrease in grain size. Presence of electronic centres in nanocrystalline PbF₂ is observed from Raman studies and the same has been confirmed by photoluminescence studies. Al₂O₃ was prepared and⁵⁶Fe ions were implanted. After implantation segregation of⁵⁶Fe ions was examined by SEM. The oxidation properties of ITO were studied by HRTEM. As against the expectation of oxide coating on individual nanograins of In-Sn alloy, ITO nanograins grew into faceted nanograins on heat treatment in air and O₂ atmosphere. The growth of ITO under O₂ atmosphere showed pentagon symmetry. The PMN was initially prepared by solid-state reaction. Further, this PMN relaxor material will be used to convert into nanocrystalline PMN by IGCT with sputtering and will be studied