聚己内酯在聚己内酯/聚乙烯基甲基醚共混体系中的结晶研究

通过示差扫描量热(DSC)、广角X射线衍射(WAXD)、小角X射线散射(SAXS)研究了聚己内酯(PCL)/聚乙烯基甲基醚(PVME)共混体系中PCL的结晶行为.研究结果表明,共混聚合物中PCL的结晶度几乎不随体系的组成而发生变化.共混物中PVME的存在没有改变PCL的晶体结构,但是随着PVME含量的增加,片晶之间的距离则大,这主要是由于非晶层增厚引起的.     

2,2'-二乙炔基-1,1'-联萘为模板构筑的新的环芳化合物的合成及其光学性质

基于2,2'-二取代的联萘衍生物在手性构型上高度稳定的特点,分别以光学活性的(R)-和(S)-2,2'-二乙炔基-1,1'-联萘为模板,设计了2个有趣的拓扑环芳分子四联萘笼状对映异构体(R,R,R,R)-2和(S,S,S,S)-2.其合成路线涉及保护基的控制导入、苯连接桥的链接、保护基的脱去以及偶合成环反应4个步骤.用MS,IR,UV-Vis,1HNMR,13CNMR和元素分析等技术对其进行了表征,并比较了其光学性质.研究结果表明,采用这种模板合成方法能够有效地获得具有单一手性的目标化合物.镜像特征的圆二色(CD)谱和比旋光度[α]D的测定结果清楚地反映了它们的对映异构关系.     

Zn-Al-Ce三元类水滑石的制备及性质研究

采用共沉淀法，水热合成层状化合物一硝酸根柱撑锌铝铈三元类水滑石，分别测定了各种单一金属盐溶液及M^2 ／M^3 摩尔比为2，Ce^3 ／Al^3 摩尔比为0．25的混合金属盐的NaOH滴定曲线，并利用XRD对不同条件下合成产物进行物相分析。实验结果表明：在M^2 ／M^2 =2，Ce^3 ／Al^3 =0．07～0．50，pH=5．8～6．5条件下进行多种离子共沉淀，并经120℃、6h水热处理后，均能合成结构单一的ZnAlCe—HTLLcs，利用TG—DTlA、FT—IR、ICP对合成物进行了表征，筛选出适宜的合成条件，并对HTLcs层状结构的热行为进行初步研究，结果表明ZnAlCe—HTLcs热稳定性较差，层间结合水、层板羟基及层间客体物种(NO3^-)失去温度在240℃左右，易于转化为复合氧化物，将此复合氧化物应用于NO的催化?肖除反应，680℃下NO的转化率高达近100％。     

A new Sequiterpenoid from Eupatorium adenophorum Spreng

A new sequiterpenoid compound 8aα-hydroxy-1-isopropyl-4,7-dimethyl-1,2,3,4,6,8a-hexahydro-naphthalene-2,6-dione(1),together with seven known compounds anti-HH-dimer-coumarin(2),(-)-5-exo-hydroxy-bomeol(3),O-hydroxyl cinnamic acid(4),9β-hydroxy-ageraphorone(5),10Hα-9-oxo-ageraphorone(6),10Hβ-9-oxo-ageraphorone(7)and 9-oxo-10,11-dehydroageraphorone 8,was isolated from the leaves of Eupatorium adenopho-rum Spreng.The structures were elucidated by IR,~1H and ~(13)C NMR,EIMS,HMBC and single-crystal X-ray spec-tral data.     

制备条件对Au/TiO2催化CO氧化性能的影响

采用沉积沉淀法和化学沉积法，分别制备了Au/TiO2催化剂，比较详尽地探讨了制备方法及制备条件对其催化CO氧化性能的影响，并对催化剂进行XRD表征，优化了制备条件，结果显示，控制沉积－沉淀反应液的pH值范围为6．5－7．0，浓度为40mL水／g载体，温度70℃，还原温度85℃,时间60min，以沉积－沉淀法制备的3％Au/TiO2催化剂可于－35℃将CO完全转化，经还原预处理比经焙烧得到的催化剂的活性更高，用光化学沉积法制备的Au/TiO2催化剂的活性欠佳。     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的合成及其温度和pH值敏感性自组装研究

通过原子转移自由基聚合方法, 在丁酮/异丙醇混合溶剂中合成了分子量可控和分布较窄的聚丙烯酸叔丁酯-b-聚N-异丙基丙烯酰胺(PtBA-b-PNIPAM)嵌段共聚物, 用GPC和 1 H NMR对其结构进行了表征. PtBA-b-PNIPAM在甲苯中水解得到聚丙烯酸-b-聚N-异丙基丙烯酰胺(PAA-b-PNIPAM). 用动态光散射技术对PAA-b-PNIPAM在水溶液中的自组装行为随pH值和温度变化的响应进行了初步研究.     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

Hydrogen-bonding-directed layer-by-layer assembly of poly(4-vinylpyridine) and poly(4-vinylphenol): effect of solvent composition on multilayer buildup

This paper describes the buildup of hydrogen-bonding-directed poly(4-vinylpyridine)/poly(4-vinylphenol) (PVPy/PVPh) multilayer film that was fabricated by layer-by-layer (LbL) assembly of PVPy and PVPh from an ethanol solution. UV-visible spectroscopy and Fourier transform infrared (FT-IR) spectroscopy revealed a uniform deposition process. The interaction between PVPy and PVPh was identified as hydrogen bonding through FT-IR spectroscopy and temperature-dependent IR spectral changes of the hydrogen-bonded multilayer. Notably, we discussed the effect of solvent conditions on the growth of PVPy/PVPh multilayer films monitored by UV-visible spectroscopy. It was found that increasing the ratio of N,N-dimethylformamide (DMF) in the mixed ethanol/DMF solvents resulted in a marked decrease of the amount of polymers adsorbed, which was attributed to the increased polarity of the adsorption solutions. Furthermore, the solvent stability of PVPy/PVPh multilayer film in mixed ethanol/DMF solvents with different DMF ratios was also investigated. As a result, a new method for tuning the structure of hydrogen-bonding-directed multilayer film was developed.     

水+3-甲基吡啶+溴化钠三元溶液临界跨接现象

采用折射率法在较宽温度范围内研究了溴化钠、3-甲基吡啶和水的临界质量分数分别为0.240、0.192和0.568体系的临界性质, 发现在近临界点临界指数为0.365, 与Fishe重整化值一致. 有效临界指数随着温度逐渐远离临界点, 从0.365下降到0.20左右, 但当排除了“正规项”的影响后, 展现出向平均场理论值0.5单调跨接的行为.