氧化石墨烯表面新型磁性四溴双酚A印迹复合材料的制备及吸附性能

以二氧化硅包覆的磁性氧化石墨烯为载体, 利用热聚合方法制备了对四溴双酚A(TBBPA)有特异吸附效果的新型磁性印迹复合材料. 采用透射电子显微镜(TEM)、 扫描电子显微镜(SEM)、 傅里叶变换红外光谱(FTIR)、 热重分析(TGA)和样品振动磁强计(VSM)对该印迹复合材料进行了表征. 结果表明, 在氧化石墨烯表面制备了一层厚度为55~65 nm、 热稳定良好的磁性印迹层. 结合磁固相萃取技术(M-SPE)和高效液相色谱(HPLC)检测技术研究了该磁性印迹复合材料对四溴双酚A的吸附行为, 结果表明该印迹复合材料对四溴双酚A具有良好的选择吸附能力, 最大吸附量为16.33 mg/g. 结合HPLC检测技术, 该印迹复合材料可用于分离富集饮用水中的四溴双酚A.     

磁性碳纳米管表面新型壬基酚印迹纳米复合材料制备及吸附性能

采用聚苯胺包覆的磁性多壁碳纳米管为载体,以壬基酚(NP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂制备新型磁性壬基酚印迹复合萃取材料。 采用扫描电子显微镜(SEM)、红外光谱(FT-IR)和样品振动磁强计(VSM)等技术手段对该磁性印迹复合材料进行表征和分析,结果表明,在磁性碳纳米管表面成功接枝厚度为60~70 nm的印迹聚合层。 采用高效液相色谱(HPLC)技术对该印迹复合材料的吸附性能进行探讨,结果表明,该磁性印迹复合材料对壬基酚具有特异性吸附性能,最大吸附量为38.46 mg/g。 结合HPLC检测技术,该磁性印迹复合材料成功用于分离富集饮用水中的壬基酚。     

磁性双酚A分子印迹材料的制备及性能研究

采用沉淀法制备了Fe_3O_4磁性微球,以硅烷化试剂对其表面改性后作为载体,以双酚A为模板分子,甲基丙烯酸为功能单体,N,N′-亚甲基双丙烯酰胺为交联剂,采用乳液聚合法制备了对BPA有特异吸附性能的磁性分子印迹材料(MMIPs)。此材料具有较强的磁性和对双酚A的吸附性,可以在外加磁场的条件下方便实现水中双酚A的富集分离。溶液中双酚A的质量浓度为60mg·L~(-1)时,制备的磁性MIPs材料对双酚A饱和吸附量为22.06mg·g~(-1),60min达到吸附平衡。     

三聚氰胺磁性印迹固相萃取材料的制备及其应用

采用磁性氧化石墨烯(GO)为载体,三聚氰胺(MEL)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,制备了新型三聚氰胺磁性印迹聚合物。 采用扫描电子显微镜(SEM)、透射电子显微（TEM）、差热分析(TG)和样品振动磁强计(VSM)对该磁性印迹聚合物进行表征和分析,结果表明,在氧化石墨烯表面成功制备磁性印迹聚合物。 结合高效液相色谱分析技术对该印迹聚合物的吸附性能进行检测,结果表明,该磁性印迹聚合物对三聚氰胺表现出特异性吸附性能,最大吸附容量为33.11 mg/g;相对于环丙氨嗪和三聚氰酸,三聚氰胺的选择因子(β)分别是2.43和2.84。 结合磁固相萃取与液相色谱检测技术,实现了牛奶样品溶液中三聚氰胺的分离、富集和检测。     

多壁碳纳米管表面对硝基苯酚印迹复合材料的制备与吸附性能

以多壁碳纳米管表面接枝的L-苯丙氨酸为结合位点, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用沉淀聚合技术, 在碳纳米管表面制备了对硝基苯酚印迹复合材料. 采用红外光谱和扫描电镜研究了该印迹复合材料的结构和形貌, 结果表明, 在碳纳米管表面接枝了一层稳定的印迹材料. 采用高效液相色谱研究了该印迹材料的等温吸附性能, 结果表明, 该印迹材料对模板分子具有较大的吸附容量(Qmax=80.5 μmol/g)和良好的选择吸附性能(选择因子达2.5). 以该印迹材料作为固相萃取吸附剂, 研究了它对对硝基苯酚和其它结构类似物混合溶液的动态吸附性能, 结果表明, 印迹复合材料对对硝基苯酚的吸附容量不受结构类似物浓度的影响, 能较好地应用于对硝基苯酚的分离富集检测.     

表面印迹聚合物萃取/气相色谱质谱联用检测双酚A

以双酚A(BPA)为模板分子,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯作为交联剂,在硅胶表面合成双酚A分子印迹聚合物。通过红外光谱、比表面积测定等对表面印迹聚合物进行分析和表征;采用静态吸附法和动态吸附法对其吸附性能进行考察。红外光谱表明硅胶表面生成了对模板分子具有识别功能的官能团;热重分析证明该印迹聚合物具有良好的热稳定性;静态吸附实验说明表面印迹聚合物比非印迹聚合物具有良好的吸附性能,该印迹聚合物对双酚A最大吸附容量Q max为1.501 mg/g,吸附速率常数k为0.01586g/(mg·min)。用表面印迹聚合物萃取(MISPE)和气相色谱质谱(GC-MS)联用检测了BPA样品,BPA的回收率接近90%,并将该双酚A表面印迹聚合物用于牛奶样品中的BPA测试,结果表明该印迹聚合物具有较好的吸附选择性。     

乙草胺磁性分子印迹聚合物的制备及其应用

以γ-(甲基丙烯酰氧)丙基三甲氧基硅烷(KH-570)改性的Fe_3O_4纳米粒子为载体,以乙草胺(acetochlor)为模板分子,采用表面分子印迹技术制备乙草胺磁性分子印迹聚合物(Fe_3O_4@SiO_2@MIP)。通过红外光谱和扫描电镜对聚合物的结构和形貌进行表征;通过高效液相色谱(HPLC)检测技术考察磁性印迹聚合物的吸附性能。结果表明,该印迹聚合物对乙草胺具有良好的选择识别能力,其最大吸附量为86.61 mg·g~(-1),并将其作为固相萃取剂成功应用于稻田水中乙草胺的分离、富集。     

分子印迹空心球在蛋白质固相萃取中的应用

建立了分子印迹固相萃取-高效液相色谱相结合分离复杂样品中牛血红蛋白(Hb)的方法. 以单分散的二氧化硅球为载体, Hb为模板, 采用表面印迹法制备了分子印迹空心球(MIHS). 采用透射电子显微镜(TEM)对该印迹材料的形貌进行了表征. 结果表明, 所制备的MIHS的单分散性好、 粒径均匀, 是一种理想的固相萃取填料. 以该印迹材料作为固相萃取吸附剂, 并结合高效液相色谱(HPLC)研究了其对Hb的吸附行为, 结果表明, 制备的MIHS在磷酸盐缓冲液(pH=7.0)中对Hb的回收率高于80%, 而对核糖核酸酶A(RNase A)和细胞色素C(Cyt C)的回收率低于50%, 方法的精密度高(RSD<5%). 与Hb印迹硅球相比, MIHS具有较快的传质速率和萃取效率. 将MHIS应用于复杂样品中Hb的分离, 结果表明, MIHS可以从加标牛血清中选择性吸附Hb, 吸附率达82%.     

分子印迹磁性固相萃取/液相色谱法检测奶制品中的双酚A

以双酚A(BPA)为模板分子,磁性二氧化硅(Fe_3O_4@SiO_2)为载体,4-乙烯基吡啶(4-VP)为功能单体,采用表面分子印迹技术制备了双酚A磁性分子印迹聚合物微球(Fe_3O_4@SiO_2-MIPs)。通过红外光谱、透射电镜等对Fe_3O_4@SiO_2-MIPs进行了结构和形貌的表征。将制得的Fe_3O_4@SiO_2-MIPs作为磁性吸附剂,分离富集奶制品中的BPA,建立了分子印迹磁性固相萃取/液相色谱法测定奶制品中BPA的新方法。结果表明,在优化条件下,Fe_3O_4@SiO_2-MIPs对BPA具有良好的选择性,最大吸附容量达13.50 mg/g,在0.05~5.0 mmol/L浓度范围内有良好的线性关系(r2=0.993 4),方法检出限为0.037μg/L,样品加标回收率为86.2%~93.1%,相对标准偏差为2.9%~3.8%。该方法高效快速,选择性好,可用于牛奶样品中痕量BPA的检测。     

多壁碳纳米管表面邻苯二甲酸二(2-乙基)己酯印迹聚合物的制备及其在固相萃取中的应用

以苯基修饰的多壁碳纳米管为载体,邻苯二甲酸二(2-乙基)己酯为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面接枝一层塑化剂邻苯二甲酸二(2-乙基)己酯印迹聚合层.采用红外光谱和扫描电镜对聚合物进行表征和分析.结果表明,在碳纳米管表面成功接枝一层20～30 nm厚的印迹聚合层.采用高效液相色谱研究该印迹聚合物的吸附性能,结果表明,碳纳米管分子印迹聚合物对邻苯二甲酸二(2-乙基)己酯最大吸附量为69.1 μmol/g,达到吸附平衡时间约为60 min.选择性吸附实验表明,与其它结构类似物相比,该印迹复合材料对邻苯二甲酸二(2-乙基)己酯有良好的识别能力.作为固相萃取材料装填于固相萃取柱中,该印迹聚合物能对芒果汁样品中塑化剂进行有效的分离和富集.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.