印迹聚合物改性多壁碳纳米管固相萃取熊果酸

以聚乙二醇改性的碳纳米管为基质,熊果酸为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,采用沉淀聚合法成功制备碳纳米管-印迹复合材料.采用红外光谱和扫描电镜研究该复合印迹材料的结构和形貌.结果表明,在碳纳米管表面接枝一层稳定且均匀的印迹材料.采用静态吸附实验研究此印迹材料的吸附性能,...     

多壁碳纳米管表面大黄素印迹材料制备及吸附性能研究

以表面硅烷修饰的碳纳米管为基材,甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,采用表面印迹技术成功制备了大黄素印迹复合材料。采用扫描电镜和透射电镜研究该印迹复合材料的形貌,结果表明,在碳纳米管表面接枝了1层稳定的约40nm厚的印迹层。在pH=8.5时,该印迹材料对大黄素具有较大吸附容量和良好选择吸附性能,最大理论吸附量(Qmax)为20.8mg/g。以该印迹材料作为固相萃取吸附剂,在85%乙醇水溶液淋洗和10%乙酸的乙醇溶液洗脱下,可实现对猕猴桃根样品粗提取液中大黄素固相萃取分离富集,回收率达到85%以上。     

多壁碳纳米管表面邻苯二甲酸二(2-乙基)己酯印迹聚合物的制备及其在固相萃取中的应用

以苯基修饰的多壁碳纳米管为载体,邻苯二甲酸二(2-乙基)己酯为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面接枝一层塑化剂邻苯二甲酸二(2-乙基)己酯印迹聚合层.采用红外光谱和扫描电镜对聚合物进行表征和分析.结果表明,在碳纳米管表面成功接枝一层20～30 nm厚的印迹聚合层.采用高效液相色谱研究该印迹聚合物的吸附性能,结果表明,碳纳米管分子印迹聚合物对邻苯二甲酸二(2-乙基)己酯最大吸附量为69.1 μmol/g,达到吸附平衡时间约为60 min.选择性吸附实验表明,与其它结构类似物相比,该印迹复合材料对邻苯二甲酸二(2-乙基)己酯有良好的识别能力.作为固相萃取材料装填于固相萃取柱中,该印迹聚合物能对芒果汁样品中塑化剂进行有效的分离和富集.     

碳纳米管表面绿原酸印迹固相萃取材料的制备及应用

在多壁碳纳米管表面接枝的双键键合,以绿原酸为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合技术,在碳纳米管表面成功制备绿原酸印迹材料.采用红外光谱、扫描电镜和热重分析研究此印迹材料的性能.结果表明,在碳纳米管表面接枝一层稳定、均匀、30～40 nm厚的印迹材料.采用高效液相色谱研究此印迹材料的吸附动力学及吸附容量,实验结果表明,此印迹材料对绿原酸的结合存在两个结合位点,最大吸附容量Qmax分别为21.5和32.7 μmol/g.以此印迹材料作为固相萃取剂,优化萃取条件,成功应用于金银花提取液中绿原酸的富集分离研究,富集因子达25.     

磁性碳纳米管表面新型壬基酚印迹纳米复合材料制备及吸附性能

采用聚苯胺包覆的磁性多壁碳纳米管为载体,以壬基酚(NP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂制备新型磁性壬基酚印迹复合萃取材料。 采用扫描电子显微镜(SEM)、红外光谱(FT-IR)和样品振动磁强计(VSM)等技术手段对该磁性印迹复合材料进行表征和分析,结果表明,在磁性碳纳米管表面成功接枝厚度为60~70 nm的印迹聚合层。 采用高效液相色谱(HPLC)技术对该印迹复合材料的吸附性能进行探讨,结果表明,该磁性印迹复合材料对壬基酚具有特异性吸附性能,最大吸附量为38.46 mg/g。 结合HPLC检测技术,该磁性印迹复合材料成功用于分离富集饮用水中的壬基酚。     

β-环糊精接枝壳聚糖的合成及其吸附性能

采用乙二醛作为交联物合成了一种β-环糊精接枝壳聚糖,研究了其对水溶液中对硝基苯酚的吸附性能;考察了温度、pH值、吸附时间、酚溶液初始浓度等因素对其吸附性能的影响.结果表明,当吸附时间为20min,pH值为5~6,温度为25℃~35℃,酚溶液初始浓度为80 mg/L时,β-环糊精接枝壳聚糖对对硝基苯酚的吸附性能最佳.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

对硝基苯酚在多壁碳纳米管修饰玻碳电极上的电化学行为及分析测定

水中对硝基苯酚主要来源于化工、制药行业，它有致癌作用。人们已对它的测定方法进行了大量的研究，最早采用的测定方法是分光光度法，其检测限偏高；色谱法测定对硝基苯酚，操作繁琐，仪器昂贵，分析成本高。后来又发展了一种操作更方便的直接用于测定的电化学方法。本文旨在利用碳纳米管对对硝基苯酚的吸附性能，研究对硝基苯酚在多壁碳纳米管修饰电极上的电化学行为。     

含氟聚合物修饰碳纳米管及其聚氨酯复合疏水膜的研究

利用羟基碳纳米管上的羟基与2-溴异丁基酰溴之间的简单反应, 在碳纳米管上引入了含溴ATRP引发剂, 并进一步引发含氟丙烯酸酯的ATRP聚合, 从而在碳纳米管表面接枝上了低表面能的含氟聚合物. 红外光谱(FT-IR)、热重分析(TGA)和透射电镜(TEM)的研究结果表明碳纳米管与含氟聚合物之间为化学键连接. 以此低表面能聚合物包裹的碳纳米管作为填充粒子, 采用溶液浇铸方法制备了聚氨酯/碳纳米管复合膜, 并利用溶剂四氢呋喃(THF)刻蚀表面获得了不同碳纳米管裸露程度的复合膜材料. 静态接触角测试结果表明, 无论是羟基碳纳米管还是低表面能修饰的碳纳米管均可提高其复合膜的疏水性能, 且其疏水性能随碳纳米管含量的增加而增加; 相同含量时, 含氟聚合物接枝后的碳纳米管使复合膜具有更佳的疏水性能, 膜表面经溶剂刻蚀后可显著提高其疏水性能. 采用扫描电子显微镜(SEM)研究了加入碳纳米管和溶剂刻蚀对聚合物表面微观结构以及材料表面疏水性能的影响. 上述结果表明: 利用接枝聚合物可改变碳纳米管本身的疏水性能, 并可进一步制备新型的具有表面疏水性能的聚合物纳米复合材料.     

对-特辛基酚表面印迹聚合物的制备及吸附性能评价

以对-特辛基酚为模板、甲基丙烯酸为功能单体制备了对-特辛基酚表面印迹聚合物.采用扫描电子显微镜、紫外光谱以及红外光谱对印迹聚合物进行表征,通过平衡吸附实验对聚合物的吸附性能进行评价.结果表明:该分子印迹聚合物对对-特辛基酚具有较大的吸附容量和良好的选择性,其最大吸附量Qmax约为86.12mg/g.     

分子印迹胶体阵列检测对硝基苯酚

以对硝基苯酚(p-NP)为印迹模板,丙烯酰胺为功能单体,制备单分散的对硝基苯酚分子印迹胶体微球。通过垂直沉降法将分子印迹胶体微球自组装为分子印迹胶体阵列,采用胶带将分子印迹胶体阵列粘贴固定。固定于胶带上的分子印迹胶体阵列膜显示出良好的稳定性,而且对目标分子p-NP具有明显的光学响应。分子印迹微球吸附目标分子发生溶胀,引起胶体阵列溶涨,分子印迹胶体阵列(MICA)反射峰位置发生移动。实验结果显示,MICA随着p-NP浓度增加,反射峰红移近60 nm,MICA表面颜色由红色逐渐变为蓝紫色;而非印迹胶体阵列红移量只约40 nm。MICA简化了光子晶体凝胶传感材料的制备步骤,为开发新型高性能生化传感器材料提供了新思路。     

核-壳型赤藓红分子印迹聚合物的制备及吸附性能的评价

以氨基化修饰的SiO_2为内核,人工合成色素赤藓红为模板,甲醇/水为溶剂,4-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,偶氮二异丁腈为引发剂,采用表面印迹技术,制备核-壳型赤藓红分子印迹聚合物。通过红外光谱对其结构进行表征,并通过动力学吸附、等温饱和吸附和实际样品加标实验对其吸附性能进行评价。结果表明,核-壳型赤藓红分子印迹聚合物具有较快的吸附能力,在15min左右达到吸附平衡,有较好的吸附容量,能够从复杂的食品样品中选择性吸附模板,且回收可达85%。     

Preparation and evaluation of temperature and magnetic dual‐responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo‐responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N‐isopropylacrylamide as the thermo‐responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5–100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo‐responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature‐responsive regulation.     

Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers

Novel thermosensitive molecularly imprinted polymers were successfully prepared using the epitope imprinting approach in the presence of the mimic template phenylphosphonic acid, the functional monomer vinylphosphonic acid‐Ti⁴⁺, the temperature‐sensitive monomer N‐isopropylacrylamide and the crosslinker N,N′‐methylenebisacrylamide. The ratio of the template/thermosensitive monomers/crosslinker was optimized, and when the ratio was 2:2:1, the prepared thermosensitive molecularly imprinted polymers had the highest imprinting factor. The synthetic thermosensitive molecularly imprinted polymers were characterized by Fourier transform infrared spectroscopy to reveal the combination and elution processes of the template. Then, the adsorption capacity and thermosensitivity was measured. When the temperature was 28°C, the imprinting factor was the highest. The selectivity and adsorption capacity of the thermosensitive molecularly imprinted polymers for phosphotyrosine peptides from a mixture of three tailor‐made peptides were measured by high‐performance liquid chromatography. The results showed that the thermosensitive molecularly imprinted polymers have good selectivity for phosphotyrosine peptides. Finally, the imprinted hydrogels were applied to specifically adsorb phosphotyrosine peptides from a sample mixture containing phosphotyrosine and a tryptic digest of β‐casein, which demonstrated high selectivity. After four rebinding cycles, 78.9% adsorption efficiency was still retained.     

Preparation and characterization of molecularly imprinted silica monolith for screening sulfamethazine

In this work, a novel approach of preparing molecularly imprinted film‐derivatized silica monolith materials was developed by a two‐step procedure. The silica monolithic support was first prepared by the sol–gel method with tetramethoxysilane as the precursor. Subsequently, vinyl groups were introduced onto the surface of silica monolith by immobilization of γ‐methacryloxypropyltrimethoxysilane. The prepolymerization mixtures, consisting of methacrylic acid as a functional monomer, ethylene dimethacrylate as a crosslinker, sulfamethazine as a template molecule and an ionic liquid as porogen, were injected into the silica monolith immobilized vinyl groups to form the molecularly imprinted films on the surface of the vinyl functionalized silica monolith. The monolithic materials were characterized by SEM, Fourier transform IR and solid‐state reflection UV spectra. The resulted imprinted materials were evaluated under CEC and HPLC mode. The results indicated that there were enough recognition sites on the surface of the imprinted film‐derivatized monolithic materials for selectively recognizing sulfamethazine from the sulfonamide mixture. Ionic liquids, which was utilized as the porogens, could improve the flow‐through property and the imprinting effect of the molecularly imprinted film‐functionalized silica monolithic materials.     

Ordered macroporous quercetin molecularly imprinted polymers: Preparation,characterization, and separation performance

Ordered macroporous molecularly imprinted polymers were prepared by a combination of the colloidal crystal templating method and the molecular imprinting technique by using SiO₂ colloidal crystal as the macroporogen, quercetin as the imprinting template, acrylamide as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker and tetrahydrofuran as the solvent. Scanning electron microscopy and Brunauer–Emmett–Teller measurements show that the ordered macroporous molecularly imprinted polymers have a more regular macroporous structure, a narrower pore distribution and a greater porosity compared with the traditional bulk molecularly imprinted polymers. The kinetic and isothermal adsorption behaviors of the polymers were investigated. The results indicate that the ordered macroporous molecularly imprinted polymers have a faster intraparticle mass transfer process and a higher adsorption capacity than the traditional bulk molecularly imprinted polymers. The ordered macroporous molecularly imprinted polymers were further employed as a sorbent for a solid‐phase extraction. The results show that the ordered macroporous molecularly imprinted polymers can effectively separate quercetin from the Gingko hydrolysate.     

分子印迹溶胶-凝胶材料的制备及应用

分子印迹技术是制备对特定分子具有选择性识别的聚合物的技术。分子印迹技术与溶胶-凝胶过程相结合,可设计多孔无机主体,增强分子识别能力,并具有极好的热稳定性和水解稳定性。改变溶胶-凝胶过程的条件,可制备具有最佳孔隙率和表面积,并用于分离复杂的混合物、选择性吸附富集模板分子(或目标分子)、催化、微合成器应用的分子印迹溶胶-凝胶材料。综述了溶胶．凝胶技术和分子印迹技术的特点,分子印迹溶胶-凝胶技术和分子印迹溶胶．凝胶材料的概念、基本原理、制备方法及应用。     

Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs

A surface molecularly imprinted polymer (MIP) was synthesized by using imidazole as the template and modified silica particles as the support material. The static adsorption, solid phase extraction (SPE) and high-performance liquid chromatography (HPLC) experiments were performed to investigate the adsorption properties and selective recognition characteristics of the polymer for imidazole and its structural analogs. It was shown that the maximum binding capacities of imidazole on the MIP and the non-imprinted polymer (NIP) were 312 and 169 μmol g⁻¹, respectively. The adsorption was fast and the adsorption equilibrium was achieved in 30 min. The binding process could be described by pseudo-second order kinetics. Compared with the corresponding non-imprinted polymer, the molecularly imprinted polymer exhibited much higher adsorption performance and selectivity for imidazole. The selective separation of imidazole from a mixture of 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]) and 2,4-dichlorophenol could be achieved on the MIP-SPE column. The recoveries of imidazole and [C₆mim][Br] were 97.6-102.7% and 12.2-17.3%, respectively, but 2,4-dichlorophenol could not be retained on the column. The surface molecularly imprinted polymer presented here may find useful application as a solid phase absorbent to separate trace imidazole in environmental water samples. This may also form the basis for our research program on the preparation and application of alkyl-imidazolium imprinted polymers.     

Recognition of Staphylococcus enterotoxin via molecularly imprinted beads

The synthesis of molecularly imprinted beads for the recognition of the protein Staphylococcus enterotoxin B (SEB) is described. Two kinds of organic silane (3-aminopropyltrimethoxysilane (APTMS) and octyltrimethoxysilane (OTMS)) were polymerized on the surface of polystyrene microspheres after the SEB template was covalently immobilized by forming imine bonds. The resulting imprinted beads were selective for SEB. The Langmuir adsorption models were applied to describe the equilibrium isotherms. The results showed that an equal class of adsorption was formed in the molecularly imprinted polymer (MIP) with the maximum adsorption capacity of 3.86 mg SEB/g imprinted beads. The MIP has much higher adsorption capacity for SEB than the nonimprinted polymer, and the MIP beads have a higher selectivity for the template molecule.     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.