银/聚合物纳米复合材料

银/聚合物纳米复合材料是一种典型的聚合物基复合材料, 其结构和性能依赖于合成方法,因此开发材料的优异性能必须以深入研究纳米材料的先进合成技术为前提。本文综述了纳米银粒子及其与聚合物形成的纳米复合材料的最新合成进展, 重点介绍了基于液相化学还原方法合成纳米银粒子的新方法, 如溶胶-凝胶法、沉淀法、微乳液法和离子液体法, 以及纳米银粒子的分散技术和原位法合成银/聚合物纳米复合材料的新技术, 并介绍了纳米银复合材料的电绝缘性、表面增强拉曼散射性能、抗菌性及其在生物医学等领域中的应用。     

银/碳纳米管纳米复合物制备及性质研究

基于苯环与碳纳米管之间较强的π-π共轭效应和醛基对银氨溶液的还原作用,利用吸附在碳纳米管上的香草醛分子原位还原[Ag(NH3)2]+,成功获得了纳米银/碳纳米管(Ag-NPs/CNTs)复合纳米材料。紫外-可见吸收光谱和荧光光谱结果表明,碳纳米管对香草醛分子有较强的吸附作用及银纳米粒子的形成。透射电镜结果表明,碳纳米管表面形成了大小约5.0 nm银纳米颗粒。所制备的纳米复合材料表现出较明显的荧光特性,且对浓度为1.0×10-7～6.0×10-7 mol/L的H2O2表现出较好的电催化还原能力。     

纳米银的制备及抑菌性能研究

本文主要采用液相还原法,以硼氢化钠为还原剂,以聚乙烯吡咯烷酮(PVP)为保护剂,通过改变反应条件制备银纳米颗粒。利用透射电子显微镜(TEM)和X射线衍射仪(XRD)对所制得的纳米银的结构和形貌进行表征,并统计所制得的纳米银溶胶的粒径,结果表明：当m_AgNO3∶m_PVP=1∶20时,所制得的纳米银颗粒均一性较好,此时粒径约10 nm;同时,利用紫外-可见分光光度计(UV-vis)对所制得的纳米银的光学性能进行研究;并研究纳米银对大肠杆菌和金黄色葡萄球菌的抑菌效果,结果显示,用此法制得的纳米银对大肠杆菌和金黄色葡萄球菌的均显示出较好的抑菌效果。     

纳米银/二甲基砜/聚乳酸-乙醇酸静电纺丝人工敷料的制备及生物评价

采用静电纺丝方法制备了纳米银(n-Ag)/二甲基砜(MSM)/聚乳酸-乙醇酸(PLGA)抗菌人工敷料. 通过场发射扫描电子显微镜(ESEM)和能量离散X射线光谱(EDX)研究敷料的微观结构及表面元素组成. 同时对敷料的力学性能、 吸水性、 细胞相容性及抗菌性进行测试, 结果表明, 该敷料内部纤维呈交叉的网格状结构, 互相连结, 随着n-Ag含量的增加, 纤维的力学强度逐渐增大, 吸水性能逐渐增强. 当n-Ag质量分数达到1%以上时, 敷料对革兰氏阳性菌金黄色葡萄球菌和革兰氏阴性大肠杆菌具有良好的抗菌活性. 细胞实验结果表明, 当n-Ag含量在0.01%～10%之间时, 敷料属无毒性或低毒性; 当其含量小于1%时, 有助于细胞的生长和增殖. 因此, 该敷料具有良好的细胞相容性和抗菌性能.     

疏水改性壳聚糖/银纳米粒子支架的制备与抗菌性能评价

在战争、自然灾害及交通事故中,不可控出血及伤口感染的非及时处理导致大量的人员伤亡。为有效解决上述问题,本研究基于贻贝仿生化学制备了疏水改性壳聚糖/银纳米粒子复合支架,对支架的物理、化学及生物学性能进行系统性评价。扫描、透射电子显微镜及X-射线光电能谱结果表明,银纳米粒子原位负载于支架的三维网络中。体内/外抗菌实验结果证实,支架对革兰氏阳性金黄色葡萄球菌与革兰氏阴性大肠杆菌具有优良的抗菌活性。体外细胞毒性实验结果表明,贻贝仿生疏水改性壳聚糖/银纳米粒子复合支架具有良好的细胞相容性。结果表明该支架是一种具有潜在应用价值的创伤敷料。     

电纺含银纳米粒子复合纤维的制备及应用

银纳米粒子由于其特殊的物理化学性质而被广泛应用,但其易团聚,影响实际使用效果。银纳米粒子可被负载到稳定载体上,获得具有优异性能的纳米复合材料,克服了团聚等缺限,大大改善应用效果和效率。采用静电纺丝技术制备银修饰纳米复合纤维材料是其中一种有效的方法,近年来在复合材料制备领域受到了广泛关注。本文综述了最近几年关于静电纺丝制备负载银纳米颗粒纤维复合材料及其应用的研究进展,重点介绍了静电纺丝制备负载银纳米纤维过程中纳米银的生成和负载方法,总结了有机主体和无机主体两种纺丝纤维的制备研究进展,详细介绍了负载银纺丝纤维在几个重要领域的应用及研究方向。     

含水状态对细菌纤维素/聚苯胺复合凝胶膜制备及性能的影响

以不同含水量细菌纤维素为模板,苯胺单体为原料原位聚合生成聚苯胺,制备出不同含水量细菌纤维素/聚苯胺(HBC/PANI、LBC/PANI及DBC/PANI)复合凝胶膜,系统研究了细菌纤维素凝胶膜含水量和反应时间对苯胺原位聚合以及复合凝胶膜微观形貌、电学性能和力学性能的影响.扫描电镜照片表明聚苯胺均匀包覆在BC纤维上形成导电网络结构;四探针测试表明聚合时间90 min时导电率最高;低含水量加快了聚合反应速度,提高了复合凝胶膜的电导率,而完全干燥则使电导率降低;交流阻抗测试也表明低含水量可以明显提高材料的离子导电性;力学性能测试结果表明了BC/PANI复合凝胶膜具有良好的机械性能,抗拉强度可达0.21 MPa,同时低含水量不会降低复合凝胶膜的力学性能.     

通过正离子聚合原位制备聚谷氨酸苄酯-g-(聚四氢呋喃-b- 聚异丁烯)/银纳米复合材料及其性能研究

采用烯丙基溴官能化聚异丁烯/高氯酸银体系引发四氢呋喃活性正离子聚合制备聚谷氨酸苄酯-g-(聚四氢呋喃-b-聚异丁烯)/银纳米复合材料(PBLG-g-(PTHF-b-PIB)/Ag).研究接枝密度对该纳米复合材料表面组成、形貌及自组装行为的影响,进一步探究纳米复合材料中银的含量、分布、晶型及存在形态,以布洛芬(IBU)作为模拟药物,研究接枝共聚物中接枝密度和平均支链长度对纳米复合材料载药释药行为的影响,通过抑菌圈法和MTT法研究纳米复合材料的抗菌性和细胞毒性.结果表明:通过烯丙基溴官能化聚异丁烯大分子引发四氢呋喃活性正离子开环聚合,可以原位制备不同接枝密度和不同平均支链长度的PBLG-g-(PTHF-b-PIB)/Ag纳米复合材料,其中银的质量含量在0.25%~3.9%之间,与其理论含量基本相吻合,银颗粒以聚集体形态存在,尺寸为5~10 nm,晶型为面心立方结构;该纳米复合材料在四氢呋喃/正己烷(4/1,V/V)混合介质中自组装形成胶束,胶束数目随接枝密度增加而减少,但尺寸增大;随接枝共聚物中接枝密度和纳米银含量增加,纳米复合材料的疏水性增加;随接枝共聚物中接枝密度增加,纳米复合材料表面形貌可由球形结构逐渐转化为双连续相结构;纳米复合材料的载药微球可以通过接枝共聚物中主链PBLG的空心螺旋结构、酰胺键及PTHF支链的醚键结构显示三重载药特性,载药量和累积释药量均随着接枝共聚物中接枝密度或PTHF链段长度增加而增加,且在37oC下的释药率是25oC下释药率的3倍左右.该纳米复合材料的抗菌性能随纳米银含量增加而增加,当纳米银含量为1.48%时,该纳米复合材料1周后细胞存活率为97.7%,即无细胞毒性.     

原位法制备纳米银修饰碳纳米管环氧导电复合材料

将碳纳米管(CNTs)和乙酸银同时引入到环氧树脂-咪唑固化体系中,在固化过程中原位热降解银-咪唑复合物生成纳米银修饰碳纳米管,差示扫描量热仪(DSC)表明改性碳纳米管对环氧固化有一定的促进作用.采用X-射线衍射(XRD)表征了乙酸银和咪唑配合物[Ag(2E4MZ)2]Ac的结构,并提出了原位降解生成纳米银的机理.XRD结果表明,单独的乙酸银-咪唑配合物热降解生成的纳米银粒径为21-24nm,而配合物在环氧基体中生成的纳米银粒径为11-13nm.添加80%(质量分数)片状微米银粉制备的纳米银/碳纳米管环氧导电复合材料其体积电阻率低达9×10-5Ω·cm.当纳米银和碳纳米管质量比为80:20时,复合材料导电性和剪切强度达到最佳;采用扫描电镜(SEM)表征了复合材料的形貌结构.     

多核核壳结构银胶粒的制备及其抑菌特性

银纳米粒子具有广谱抗菌性,但自身由于具有较高的表面能容易发生团聚.本文以聚醚胺为还原剂和稳定剂,利用光化学还原法,合成了聚乙二醇包覆的银纳米粒子.通过透射电子显微镜分析表明该胶体粒子具有多核核壳结构,聚乙二醇包裹的银纳米颗粒粒径在14 nm左右,整个胶体粒子粒径在45 nm左右.抑菌实验结果表明这种银纳米胶体对大肠杆菌和金黄色葡萄球菌有明显的抑菌效果.     

Structure and properties of biodegradable carboxymethyl cellulose films containing silver nanoparticles

Silver nanoparticles stabilized in a solution of sodium carboxymethyl cellulose with a degree of substitution of 0.85 and a degree of polymerization of 600 have been synthesized. The structuring; physical, chemical, and mechanical properties; and antimicrobial activities of films prepared from sodium carboxymethyl cellulose solutions containing silver nanoparticles have been studied. The shapes, quantities, and sizes of the silver nanoparticles occurring in the sodium carboxymethyl cellulose films were determined with the use of transmission electron microscopy, atomic force microscopy, and UV spectroscopy. It was found that an increase in the concentration of silver nitrate in sodium carboxymethyl cellulose solutions, as well as photoirradiation of the films, leads to the changes in the sizes and shapes of silver nanoparticles. The shapes, sizes, and quantities of silver nanoparticles determine their biological activity. An increase in the quantity of 5- to 25-nm silver nanoparticles was found to enhance the microbicidal activities of the carboxymethyl cellulose films.     

丁二酸酐接枝纤维素纳米纤维膜及其重金属离子吸附

采用热致相分离(TIPS)法以三醋酸纤维素(TCA)为原料成功制备直径为(110±28)nm TCA多孔纳米纤维膜。将TCA纤维膜通过水解转化为纤维素(Cell)、接枝制备丁二酸酐接枝改性纤维素(Cell-g-SAA)膜。将Cell膜和Cell-g-SAA膜用于吸附水中Cu~(2+)、Pb~(2+),并对膜样品的吸附动力学、等温吸附和吸附热力学进行了研究。结果表明,二级动力学拟合和Langmuir模型更适合于该体系。与Cell膜相比,改性后Cell-g-SAA膜对Cu~(2+)和Pb~(2+)的最大吸附容量分别从51.73和34.29 mg/g增加到116.41和51.73 mg/g。纤维膜对Cu~(2+)、Pb~(2+)的吸附更趋近于单层吸附且化学吸附占主导地位。     

A green approach to prepare Ag NPs loaded IC/PVA polymeric film for antimicrobial applications

In this study, glyoxal-cross-linked Iota carrageenan (IC) /poly(vinyl alcohol) PVA films were prepared and loaded with silver nanoparticles via a green approach, consisting of sweet lime juice induced in-situ reduction of Ag(I) ions to nano silver within the film matrix. The formation of silver nanoparticles was confirmed using UV–visible spectrophotometry. The Ag NPs-loaded films were also characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR). The dynamic water uptake data were interpreted by the ‘Power functional model’. The films showed fair antimicrobial action against bacteria E. Coli.     

CoSe2/C复合电催化材料修饰隔膜对高载量锂硫电池性能的影响

以具有菱形十二面体结构的ZIF-67为模板, 采用两步烧结法合成了CoSe₂/C复合材料, CoSe₂纳米颗粒直径约30 nm, 均匀分散在碳骨架上. 电化学测试结果表明, CoSe₂/C复合材料在放电过程中可以加快可溶性聚硫离子的还原反应动力学, 还能够促进不溶性Li₂S的沉积过程, 同时加速充电过程中Li₂S的氧化分解. 将CoSe₂/C作为电催化材料与碳材料混合后用于隔膜修饰, 修饰层面载量仅为0.15 mg/cm², 其中CoSe₂/C的质量分数仅占30%时, 电池依然表现出优异的电化学性能; 当硫载量为4.8 mg/cm²时, 在0.2C倍率下电池初始放电比容量为756 mA·h/g, 经过180次循环后, 容量依然能够维持715 mA·h/g, 每次衰减率仅为0.031%.     

反应温度对蒙脱石载银量及其缓释性能的影响

以钠基蒙脱石(Na-MMT)为载体,氧化银与氨水反应形成的银氨络合物[Ag(NH₃)₂OH]为前驱体,通过离子交换和三乙醇胺(TEA)还原两步法制备了载银蒙脱石(Ag-MMT)。 用佛尔哈德法测定了载银蒙脱石(Ag-MMT)的载银量,探讨了反应温度对MMT 载银量及其缓释性能的影响,并用FI-IR、XRD等技术手段对Na-MMT和Ag-MMT的结构进行了表征。 结果表明,在蒙脱石与Ag⁺的质量比为20:1、离子交换时间为1 h、反应温度50 ℃,然后再加入三乙醇胺和聚乙烯吡咯烷酮,50 ℃下反应2 h,MMT的载银量最大,银的利用率达到86.89%,释放时间最持久,并且MMT的层状结构没有被破坏。     

以椰壳生物质炭为燃料的直接炭固体氧化物燃料电池

通过热裂解制得椰壳炭,表征了其结构和组成,并将其用于电解质为钇稳定化氧化锆（YSZ）、电极材料为银和钆掺杂氧化铈（Ag-GDC）的固体氧化物燃料电池（SOFC）的燃料,对所构成的直接炭固体氧化物燃料电池（DC-SOFC）的性能进行了测试研究。结果表明,所制得的椰壳炭颗粒粒径在微米级别,具有介孔结构,而且椰壳炭中含有K、Ca等元素,可用作Boudouard反应催化剂。当使用椰壳炭作为DC-SOFC燃料时,在800 ℃下电池最大功率密度为255 mW/cm²;负载Fe催化剂后,最大功率密度提升为274 mW/cm²。以0.5 A/cm²的恒电流放电,0.5 g负载Fe椰壳炭燃料电池能够连续工作17.6 h,燃料利用率为39%,表明椰壳炭作为DC-SOFC燃料具有优异的性能和潜力。     

Synthesis and characterization of P2O5–SiO2–X (X = phosphotungstic acid) glasses as electrolyte for low temperature H2/O2 fuel cell application

A new class of proton conducting glass membranes for hydrogen fuel cell applications are being developed using phosphotungstic acid. These glasses are being design to yield high proton conductivities could be potential substitutes for electrolytes in H₂/O₂ fuel cell. P₂O₅–SiO₂–PWA glasses have been non-crystalline phases confirmed by structural studies. The glass materials showed good mechanical and thermal stability, and also found a maximum proton conductivity of 9.1 × 10⁻² S/cm at 90 °C and 30% RH. The average pore size less than 5 nm was determined by Barrett–Joyner–Halenda (BJH) desorption method. The electrochemical activity was investigated by polarization curves and current–voltage profiles. A maximum power density value of 10.2 mW/cm² was obtained using 0.15 mg/cm² of Pt/C loaded on electrode and 5P₂O₅–87SiO₂–8PWA glasses at 30 °C and 30% humidity.     

Structure and Performance Modulation of Self-Adhesive SIS/C5 Electrospun Membranes for Transdermal Drug Delivery北大核心CSCD

Electrospun membranes are widely utilized to enhance the water vapor permeability and drug delivery performance of transdermal drug delivery patches. Due to the lack of adhesion property,however,most of them cannot closely contact with skin,which impedes the delivery of drugs to the skin,thus affecting the transdermal administration. C5 resin is used to endow poly（styrene isoprene styrene）（SIS）electrospun membranes with pressure-sensitive adhesion property. Investigation is performed on how to control the structure,adhesion properties and drug delivery performance of SIS/C5 electrospun membranes loaded with synthetic capsaicin via compositions,drugs and electrospinning conditions. The results demonstrate that the electrospun membrane with a SIS/C5 ratio of 2∶1 has excellent water vapor permeability（7. 17×10－3 g/（h·cm2）and adhesion properties（180（°）peel strength is 0. 2 kN/m,tack force is 0. 64 N/cm2 ,holding power is greater than 7 days）. The synthetic capsaicin has good compatibility with the SIS/C5 electrospun membranes,in which no drug crystallizes and the drug loading is beneficial to improve the water vapor permeability. As the drug loading is 8%,the tack force is 0. 6～0. 8 N/cm2 ,the 180（°）peel strength is 0. 2～0. 3 kN/m,the holding power is greater than 7 days,and no residue is left during peeling tests. In vitro drug release indicates that the drug has a behavior of sustained release with a 24-hour cumulative release rate of greater than 50% for all SIS/ C5 electrospun membranes,meeting the requirements of transdermal drug delivery patches. © 2022, Science Press (China). All rights reserved.     

Radiation synthesis of silver nanostructures in cotton matrix

Cotton is one of the most popular natural fibres, composed mainly of cellulose, which finds a wide range of applications in paper, textile and health care products industry. Researchers have focused their interest on the synthesis of cotton nanocomposites, which enhances its mechanical, thermal and antimicrobial properties by the incorporation of various nanoparticles into the cotton matrix. Silver is one of the most popular antimicrobial agents with a wide spectrum of antibacterial and antifungal activity that results from a complex mechanism of its interactions with the cells of harmful microorganism. In this work, electron beam radiation was applied to synthesise silver nanostructures in cotton fibres. Investigations of the influence of the initial silver salt concentration on the size and distribution of the obtained silver nanostructures were carried out. A detailed characterisation of these nanocomposites with SEM-BSE and EDS methods was performed. TGA and DSC analyses were performed to assess the influence of different size silver nanoparticles and the effect of electron beam irradiation on the thermal properties of cotton fibres. A microbiological investigation to determine the antibacterial activity of Ag-cotton nanocomposites was carried out.     

High performance organic transistors and phototransistors based on diketopyrrolopyrrole-quaterthiophene copolymer thin films fabricated via low-concentration solution processing

Herein, highly crystalline diketopyrrolopyrrole-quaterthiophene copolymer thin films were achieved by a simple low-concentration solution processing with a little material waste, which exhibit efficient charge transport and optoelectronic properties for constructing high performance OFET and phototransistors.