CO加氢合成C2含氧化合物Rh-Sm/SiO2催化剂的研究

使用加压下的CO加氢反应、程序升温还原(TPR)、吸附氢的程序升温脱附(H2-TPD)以及CO和H2吸附等技术,研究了Rh-Sm/SiO2催化剂上Sm促进剂对合成二碳含氧化合物的促进效应.结果表明,Sm加入到Rh/SiO2中使催化剂的活性和二碳含氧化合物的选择性显著提高,催化剂上的Sm3+不易被还原,Sm的加入起着提高Rh分散度的作用,使催化剂上CO和H2的吸附量增大,倾向于促进乙酸和乙醛的生成.     

锂助剂对Rh-Mn/SiO2催化CO加氢制碳二含氧化合物性能的影响

 采用 CO 加氢反应、静态化学吸附、程序升温还原、CO 程序升温脱附和程序升温表面反应等技术研究了助剂 Li 对 Rh-Mn/SiO2 催化剂上 CO 加氢合成碳二含氧化合物性能的影响. 结果表明, Li 的加入及其负载量的增加抑制了烃类, 特别是 CH4 的生成, 而对碳二及碳二以上烃类的选择性影响较小. Li 的加入还提高了碳二含氧化合物的选择性, 主要是乙酸的选择性, 但同时降低了 Rh 基催化剂的 CO 加氢活性. 表征结果表明, Li 的加入既降低了催化剂解离 CO 的能力, 又减少了催化剂上 CO 解离活性位的数量, 从而降低了 Rh 基催化剂上 CO 加氢的速控步骤——CO 解离反应的速率. Li 负载量对 Rh-Mn/SiO2 催化剂上 H2 和 CO 的化学吸附量影响较小, 这表明并非所有的 Li 都和 Rh 发生了相互作用, 而是有相当一部分 Li 只是分散在载体 SiO2 上, 并没有与 Rh 发生接触.     

Rh-Mn-Li/SiO2催化剂的吸附量热和红外研究

通过在最优Rh含量基础上对金属配比的再优化,成功地改进了Rh-Mn-Li/SiO2催化剂的CO加氢性能;并采用微量吸附量热和红外等表征手段,考察了助剂Mn和Li促进作用的本质.结果表明:助剂Mn和Li的添加,使孪式和线式吸附CO的碳氧键强度增加,并同时削弱了桥式吸附CO的碳氧键或者使其转化为更易于解离的倾斜式CO吸附物种,从而同时增加了Rh基催化剂的CO解离和插入能力,提高了其活性和C2含氧化合物选择性.另一方面,Mn和Li的添加显著地降低了Rh基催化剂表面H的数量和稳定性.催化剂加氢能力显著降低极大地抑制了CH4的生成,从而有利于C2含氧化合物选择性的进一步提高.     

Rh基催化剂上CO加氢制C2含氧化合物的红外光谱研究

 用红外光谱法考察了Rh-Mn-Li-Ti/SiO2催化剂在CO加氢反应过程中表面吸附物种随压力、温度和H2/CO比的改变而变化的规律. 结果表明,高压有利于提高催化剂表面吸附的CO浓度和活性,高温有利于CO解离; 而高温、高压条件不但促进了CO吸附,而且提高并平衡了CO的解离和插入之间的相对活性,促进了C2含氧化合物的生成. H2/CO比的增大有利于CO在催化剂表面的吸附,从而促进了CO插入,尤其是CO的解离和加氢活性,但是过高的H2/CO比将导致过高的CO解离和加氢活性,引起CO插入活性的削弱而最终导致C2含氧化合物生成活性的下降. 同时,考察了助剂(Mn, Li和Ti)对Rh基催化剂表面吸附物种的影响. 结果表明,助剂的加入可提高C2含氧化合物的生成活性.     

CO和NO在Rh2-V/SiO2催化剂上共吸附的红外光谱

应用CO和NO吸附态原位红外光谱方法研究了还原态Rh2／SiO2，Rh2－V／SiO2催化剂上的活性中心铑的状态和助剂钒的作用. Rh2催化剂用Rh2（CO）4Cl2化合物制备. 在还原Rh2／SiO2催化剂上，CO吸附出现四个红外吸收峰：2085，2028cm－1（孪生态吸附RhⅠ（CO）2），2060cm－1（线式吸附RhⅡCO），1867cm－1（桥式吸附RhⅢ2CO）．在还原Rh2－V／SiO2催化剂上，CO在RhⅡ和RhⅢ中心上的吸附峰大大减弱，可以解释为Rh°向钒离子转移电子生成了带正电荷的铑中心（Rhδ＋）；同时RhⅠ（CO）2键能增加，降低了孪生CO被NO置换的程度。     

单分散SiO2的焙烧温度对Rh基催化剂上CO加氢反应性能的影响

在比较了分别以商业SiO2和采用Sto?ber法制备的单分散SiO2为载体的Rh-Mn-Li/SiO2催化剂催化CO加氢反应性能的基础上,进一步调变了Stober法制备SiO2时的焙烧温度,并考察了其对Rh-Mn-Li/SiO2催化CO加氢性能的影响.利用N2吸附-脱附、傅里叶变换红外(FTIR)光谱、H2程序升温还原(H2-TPR)、程序升温表面反应(TPSR)等方法对载体及催化剂的物理化学性能进行了表征.结果表明:不同温度焙烧的载体表面具有不同的Si―OH数量,从而影响金属的分散状态及Rh和Mn之间的相互作用.载体表面较多的羟基有利于Rh的分散和CO的吸附,从而增强催化剂的反应活性.载体表面适当数量的羟基能够得到适中的Rh与Mn之间的相互作用,使催化剂具有合适的CO解离能力,有利于CHx的CO插入反应,从而提高了C2含氧化合物的选择性.     

Rh／SiO2催化剂上甲烷部分氧化制合成气反应

 利用程序升温脱附、程序升温还原、程序升温表面反应、程序升温反应和化学捕获反应等手段，对Rh／SiO2催化剂上甲烷部分氧化制合成气反应进行了研究．结果表明，Rh／SiO2催化剂上甲烷部分氧化制合成气机理属于热解－氧化反应机理．甲烷首先在催化剂上发生解离吸附，产生具有不同H／C比的化学吸附物种CHx（x＝1～3）．其中，具有较高H／C比的CHx可能是甲烷部分氧化反应的活性物种，而具有较低H／C比的CHx可能是催化剂上积碳并导致催化剂失活的来源．活性物种CHx在活性氧物种的作用下，生成含氧中间体物种CHxO或继续脱氢．含氧中间体物种进一步分解，即生成CO和H2；CO2也可由CHx或CHxO物种进一步氧 化生成．     

改善Rh基催化剂上CO加氢生成C2含氧化物性能的本质及途径

 从CO加氢反应的热力学出发,分析了C2含氧化合物生成反应的途径和机理,阐述了改善Rh基催化剂上生成C2含氧化合物性能的本质以及实现的途径. 结果显示,相对于CO加氢生成烃类的反应,乙醇、乙醛和乙酸等C2含氧化合物的生成在热力学上是极为不利的; 最重要、最有效的提高C2含氧化合物生成活性的手段是开发具有高选择性的催化剂. 通过对浸渍方法和还原条件的选择,适当地抑制了Rh-Mn-Li-Fe/SiO2催化剂加氢活性,最终改善了催化剂的加氢性能,使得甲烷选择性降至6.3%, 而生成C2含氧化合物的选择性达到91.6%, 且保持有较高的时空收率.     

碳纳米管对Rh-Ce-Mn/SiO2催化剂催化CO加氢合成含氧化合物性能的影响

 制备了碳纳米管(CNTs)促进的Rh-Ce-Mn/SiO2催化剂,采用X射线光电子能谱、程序升温还原、 N2物理吸附、 X射线衍射以及吸附H2或CO的程序升温脱附对催化剂进行了表征,并考察了催化剂对CO加氢合成含氧化合物的催化性能. 结果表明, CNTs的添加促进了铑的分散,铑及助剂在载体表面发生富集; 活性组分铑与助剂及载体间的相互作用和催化剂样品的还原性能发生了改变; 在铑基催化剂中加入CNTs后,强吸附的H2和CO的量明显增大. CNTs促进的铑基催化剂的CO加氢活性明显提高,当CNTs添加量为10%时,一定条件下催化剂上含氧化合物的时空收率可达336.2 g/(kg·h).     

铁助剂对Rh-Mn-Li/SiO2催化剂表面上的CO脱附和CO加氢行为的影响

 采用一氧化碳程序升温脱附（CO－TPD）和吸附的一氧化碳加氢程序升温表面反应（TPSR）考察了Fe助剂对Rh基催化剂上CO的脱附行为及吸附CO的加氢行为的影响．CO－TPD实验表明，在Rh／SiO2催化剂上CO有三个脱附峰．在Rh－Mn－Li／SiO2中加入0．05％Fe后，高温脱附CO比Rh／SiO2催化剂上相应的CO量大．增加Fe的负载量，CO的脱附量减少．TPSR实验中，CO加氢反应的主要产物是甲烷．不同组分的催化剂上甲烷的生成温度有如下顺序：Rh／SiO2（482K）＜Rh－Mn－Li／SiO2（489K）＜Rh－Fe／SiO2（494K）＜Rh－Mn－Li－Fe／SiO2（501K）．甲烷峰的产生伴随着CO（s）高温脱附峰的消失，说明甲烷是由强吸附的CO加氢生成的．     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.