膦配体对乙炔羰化制丙烯酸催化剂NiBr2-CuBr2性能的影响

研究了一系列单膦配体（P（L））对NiBr₂-CuBr₂-P（L）催化乙炔羰基化制丙烯酸（AA）性能的影响。结果表明,以三叔丁基膦（P（t-Bu）₃）作配体时催化剂NiBr₂-CuBr₂-P（L）的性能最好。以P（t-Bu）₃为配体、CH₃SO₃H为酸助剂,溴化镍NiBr₂用量为0.001mol,n_NiBr2：n_CuBr2：n_P（t-Bu）3：n_CH3SO3H为1：0.5：1.5：0.5,水用量V_H2=5mL,在反应温度200℃、压力8.0MPa、时间60min时,乙炔的转化率为75.8%、丙烯酸的选择性达到98.6%。NiBr₂-CuBr₂-P（L）-CH₃SO₃H催化剂与NiBr₂-CuBr₂相比具有较高的丙烯酸选择性和收率,解决了传统催化剂选择性低、反应过程产生积碳等问题。     

α-二亚胺镍(Ⅱ)催化甲基丙烯酸甲酯聚合

以4种不同结构的α-二亚胺镍(Ⅱ)催化剂[(t-Bu)—N CH—CH N—(t-Bu)]NiBr2(C1),[C6H5—N C(Me)—C(Me)N—C6H5]NiBr2(C2),[(2,6-C6H3(Me)2)—N C(Me)—C·(Me)N—(2,6-C6H3(Me)2)]NiBr2(C3)和[(2,6-C6H3(i-Pr)2)—N C(An)—C(An)N—(2,6-C6H3(i-Pr)2)]NiBr2(An=acenaphthyl)(C4),在甲基铝氧烷(MAO)作用下,对甲基丙烯酸甲酯(MMA)进行催化聚合.以C2为模型催化剂系统研究了Al/Ni摩尔比、单体浓度、聚合温度、聚合时间和反应溶剂对催化活性及聚合物分子量的影响.在较适合的聚合条件(催化剂用量为1.6μmol,Al/Ni摩尔比为800,MMA浓度为2.9 mol/L,甲苯为溶剂,聚合温度为60℃,聚合时间为4 h)下,讨论了催化剂结构对催化活性和聚合物分子量的影响.研究发现,催化剂C1~C3催化MMA聚合均得到富含间规结构的聚甲基丙烯酸甲酯(PMMA).催化剂结构中空间位阻增大导致催化活性降低,空间位阻最小的C1催化活性最高[达107.8 kg/(mol Ni·h)];而空间位阻最大的C4催化活性仅为7.8 kg/(mol Ni·h).催化剂结构中给电子效应增加有利于催化活性及聚合物分子量的增加.C2催化活性为62.5 kg/(mol Ni·h),所得聚合物的分子量为5.0×104;而具有较强给电子效应的C3催化活性达到96.9 kg/(mol Ni·h),并得到更高分子量的聚合物(7.6×104).     

水-有机两相体系中钌络合物催化肉桂醛选择性加氢瓜研究

对RuCl3·XH2O和TPPTS[P(m-C6H4SO3Na)3]原位合成的水溶性钌膦络合物在水-有机两相体系中对肉桂醛的选择性加氢反应,考察了反应温度时间、膦配体浓度、搅拌速度、底物和催化剂之比等条件对反应活性和选择性的影响.对比了单长工链阳离子表面活性剂CTAB和双长链阳离子表面活性剂DCMAB(dicetyldimethylammonium)的助催化作用,发现DCMAB化作用明显优于CTAB,在DCMAB助催化作用下,转化率98.3%,选择性96.9%.     

Na_(12)[WZn_3(H_2O)_2(ZnW_9O_(34))_2]催化剂的制备及其催化活性

采用重结果法制备了催化剂Na12[WZn3(H2O)2(ZnW9O34)2](CatZn)。以1,2-丙二醇(1)催化选择性氧化制备羟基丙酮(2)为探针反应考察了CatZn的催化性能。在最佳反应条件[1 50 mmol,n(CatZn)∶n(1)=0.06,n(H2O)∶n(1)=1.4,n(H2SO4)∶n(1)=0.15,于70℃反应1.5 h]下,收率43.85%,选择性68.87%。     

双功能配体修饰的Ir催化剂在“氢甲酰化-缩醛化”串联反应中的共催化作用

通过对双齿膦配体的单P原子定向甲基化, 合成了两种离子型“叔膦-季鏻鎓Lewis酸”双功能配体L2和L3, 该类双功能配体分子结构中既含有与过渡金属配位的叔膦基团, 又含有具Lewis酸的季鏻鎓基团. 研究结果表明, 在合成气的体积比(CO/H₂)为4∶1时, 双功能配体L2修饰的[Ir(COD)Cl]₂催化剂高效催化烯烃的“氢甲酰化-缩醛化”串联反应, 1-辛烯的转化率为98%, 缩醛的选择性高达86%, 其催化活性好于同等条件下的Rh催化剂. 双功能配体L2与[Ir(COD)Cl]₂原位构建的共催化体系的催化效果远优于Ir(I)配合物和季鏻鎓Lewis酸的物理混合; 同时还表现出较好的底物普适性. 此外, 由于双功能配体L2的高极性, 其修饰的Ir催化剂可以顺利实现与正己烷溶液的分离, 从而实现催化剂的回收循环使用.     

镧改性固体超强酸SO42-/ZrO2-TiO2/La3+催化剂的制备及性能研究

将固体超强酸SO42-/ZrO2 TiO2负载镧制备新型催化剂SO42-/ZrO2 TiO2/La3+,以催化合成溴代正辛烷为模型反应,考察了不同制备条件对催化剂性能的影响,结果表明:以0.5mol·L-1H2SO4和5.0%的La(NO3)3混合溶液浸渍的锆钛前体氧化物,经110℃烘干后于550℃焙烧3h所得催化剂(LSZT5.0 3 550)活性较好,在n(HBr)∶n(辛醇)=5.12∶1.00、催化剂用量为反应物总质量的1.6%、反应时间为4h,反应温度约130℃的条件下,合成溴代正辛烷产率达75%以上。采用IR,XRD,DTA/TGA和Hammett指示剂法对催化剂进行表征显示:LSZT5.0 3 550具有较高的酸强度,且为无定型态。     

Hβ分子筛催化剂的制备及其在合成2-乙基蒽醌中的应用

制备了系列Hβ分子筛催化剂Cat T(T为焙烧温度)和系列负载型催化剂CatR550[R=H2SO4(a),(NH4)2S2O8(b)和(NH4)2SO4(c)]。以邻苯二甲酸酐(2)和乙苯(3)经Friedel-Crafts酰基化反应合成2-乙基葸醌(1)为探针反应,考察了T和R对其催化活性的影响。结果表明:最佳焙烧温度为550℃;最佳R为c。以Cat550为催化剂对合成1的反应条件进行了优化,考察了反应温度,反应时间,Cat550用量及r[n(2)∶n(3)]对酰化反应的影响。在最佳反应条件[2 40 mmol,n(2)∶n(3)=1∶25,Cat550用量2.0 g,于250℃反应5 h]下,2的转化率为30.6%,1的选择性为33.8%,1的收率为10.3%。以Catc550为催化剂,在c(c)为1.75 mol·L-1时,在相同的最佳反应条件下,2的转化率为39.0%,1的选择性为43.4%,1的收率为16.9%。     

一种新型双膦亚磷酸酯配体的合成及在1-己烯氢甲酰化反应中的应用

以4,4'-二羟基二苯丙烷和2,4-二叔丁基苯酚为原料合成了一种新型双膦亚磷酸酯配体,并用此配体和Rh(acac)(CO)2原位形成的催化体系催化1-己烯的氢甲酰化反应.系统考察了反应温度、压力、P/Rh和溶剂四种反应参数对催化体系的催化性能影响.选择了最佳的反应条件,在铑浓度为0.75×10-3mol/L、P/Rh比为10、温度100℃、压力(H2/CO=1)2.0MPa的条件下反应1.0h,在溶剂甲苯中1-己烯的转化率可达到100%,醛选择性为98.7%,TOF为3498.6h-1.在相同的条件下与以三苯基膦和单膦亚磷酸三(2,4-二叔丁基苯基)酯为配体的铑催化剂相比较,以新型双膦亚磷酸酯为配体的铑催化剂的催化活性是PPh3的1.6倍,而与亚磷酸三(2,4-二叔丁基苯基)酯的催化活性相当.     

聚氧乙烯基取代膦—铑配合物催化有机单相苯乙烯氢甲酰化反应研究

基于非离子表面活性膦配体的临界溶解温度特性 ,研究了以 Rh Cl3· 3H2 O为催化剂前体、聚氧乙烯基取代膦为配体原位合成的膦铑配合物催化剂 ,对有机单相体系中苯乙烯氢甲酰化反应的催化性能 .考察了反应温度、压力及不同聚氧乙烯基取代膦 -铑配合物催化剂对反应的影响 .以 Rh/PETPP配合物为催化剂时 ,在 T=10 0℃ ,p=6 .0 MPa (CO/H2 =1∶ 1)条件下 ,反应 3.5 h后 ,烯烃转化率和产物醛收率可分别达 96 .7%和 92 .6 %     

阳离子表面活性剂存在下水/有机两相体系中双环戊二烯氢甲酰化

研究了在阳离子表面活性剂存在下水/有机两相中水溶性铑配合物RhCI(CO)(TPPTS)2(TPPTS:P(m-C6H4SO3Na)3)催化双环戊二烯氢甲酰化反应,考察了反应温度、催化剂浓度、不同水溶性膦配体TPPTS和TPPDS(C5H5P(m-C6H4SO3Na)2),以及表面活性剂结构对催化反应的影响.结果表明,...     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Synthesis and characterization of inorganic solid electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 systems

The lithium-ion-conducting inorganic solid electrolytes in the oxide systems Li₂O-SiO₂-P₂O₅ and Li₂O-TiO₂-SiO₂-P₂O₅ were prepared by the solid-state reaction, and the electrolyte pellet made by cold-pressing method had diameter of 13 mm and was about 1 mm thick. Phase identification and surface morphology of the products were carried out by X-ray diffraction and scanning electron microscopy. Ionic conductivity of the pellets was investigated through ac impedance. The results show that the adding of other cations can improve the ionic conductivity of the solid electrolyte, and the sintering temperature and duration can influence the ionic conductivity. The maximum ionic conductivity in the samples is 9.9 × 10⁻⁴ S/cm in the Li₂O-TiO₂-SiO₂-P₂O₅ system. Original Russian Text ? W. Li, M. Wang, Z.H. Li, X.F. Shang, H. Wang, Y.W. Wang, Y.B. Xu, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 11, pp. 1341–1345.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

The preparation of NbH5(Me2PCH2CH2Me2)2 and NbHL2(Me2PCH2CH2PMe2)2 (L = CO or C2H4)

MMe₅(dmpe) (M = Nb or Ta, dmpe = Me₂PCH₂CH₂PMe₂) reacts with H₂ (500 atm) and dmpe in THF at 60°C to give MH₅(dmpe)_2? NbH₅(dmpe)₂ readily reacts with two mol of CO or ethylene (L) to give NbHL₂(dmpe)₂. The exchange of the hydride ligand with the ethylene protons in NbH(C₂H₄)₂(dmpe)₂ is not rapid on the ¹H NMR time scale (60 MHz) at 95°C.     

Li2O-Na2O-B2O3-SiO2烧结助剂对BaAl2Si2O8陶瓷结构与介电性能的影响

采用传统固相反应工艺,按化学计量比合成BaO-Al_2O3-SiO_2(BAS)-x%(w/w) Li_2O-Na_2O-B_2O3-SiO_2(LNBS)(x=0,1,2,3,4)陶瓷。研究不同LNBS烧结助剂添加量对BAS系微波介质陶瓷的结构和介电性能的影响。通过Clausius-Mossotti公式计算讨论了BAS理论与实验介电常数(εr)的差异。研究结果表明:LNBS烧结助剂中Li+进入钡长石Al3+位或单四元环(S4R)间隙,并产生了O_2-空位或Ba2+空位,从而促进BAS六方相向单斜相的转变。添加适量的LNBS烧结助剂后,BAS陶瓷的烧结温度从1 400℃降低到1 325℃,同时BAS陶瓷样品密度、品质因数(Qf)值以及频率温度系数(τf)得到改善。当x=1,烧结温度为1 325℃时,可获得综合性能相对较好的BAS陶瓷,其介电性能:Qf=35 199 GHz,εr=6.37,τf=-1.613×10-5℃-1。     

Formation of [Cp2TiSbMe2]2, [Cp2TiSb(SiMe3)2]2 and [Cp2TiCl]2·2Mes4Sb2

Reactions of [Cp₂Ti(btmsa)] (btmsa = bis(trimethylsilyl)acetylene) with R₄Sb₂ (R = Me, Me₃Si) give [Cp₂TiSbMe₂]₂ (1) or [Cp₂TiSb(SiMe₃)₂]₂ (2) respectively. [Cp₂TiCl]₂·2Mes₄Sb₂ (3) is serendipitously formed from [Cp₂Ti(btmsa)] and Mes₂SbH containing NH₄Cl traces.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

(H2NC4H8NCH2CH2NH2)(HNCH2CH2NH2)3Zn2Ge2Se8: A new,templated one-dimensional ternary semiconductor stabilized by mixed organic cations

The novel, 1D semiconductor (H₂NC₄H₈NCH₂CH₂NH₂)(HNCH₂CH₂NH₂)₃Zn₂Ge₂Se₈ has been synthesized under solvothermal conditions using N-(2-aminoethyl)piperazine as solvent and templating agent at 200 °C. The material was characterized by single crystal and powder X-ray diffraction, IR and Raman spectroscopy and thermogravimetric analysis. The compound consists of 1D anionic [Zn₂Ge₂Se₈]⁴⁻ chains made of alternating edge-shared [ZnSe₄] and [GeSe₄] tetrahedra that charged balanced by one N-(2-aminoethyl)piperazinium and three piperazinium cations. The optical properties were investigated with solid state UV–Vis/near IR spectroscopy and the results show that the solid is a medium gap semiconductor with an absorption edge at 1.8 eV.