Ga、Zn改性方法对HZSM-5催化剂丙烯芳构化性能的影响

以浸渍法和水热合成法对ZSM-5分子筛进行Ga、Zn改性,制得不同酸性的分子筛催化剂。采用XRD、SEM、NH3-TPD和XPS等表征手段,研究考察了Ga、Zn和不同引入方法对催化剂的孔结构、骨架结构特性和表面酸性的影响,并以丙烯芳构化为模型反应,考察了Ga、Zn改性对ZSM-5催化剂烯烃芳构化催化性能的影响。研究结果表明,Ga、Zn改性对催化剂形貌影响较小,但能明显改变催化剂的表面酸性和烯烃芳构化性能。Zn改性能降低催化剂的酸性,而Ga改性与其引入的方式有关,浸渍法引入催化剂的中强酸位略有下降,而水热合成法引入则显著增加了催化剂的总酸量。Ga、Zn改性均提高了芳构化反应的活性和芳烃选择性,并抑制催化剂表面积炭。     

碳四烃在改性HZSM-5分子筛上芳构化研究

研究了炼厂混合C_4烃在Zn、Ga、Cr、La改性的HZSM-5分子筛催化剂上的芳构化反应,采用TPD和IR测定了催化剂的表面酸性质。结果表明,用Zn(3%)和Zn(2%)Ga(1%)改性的HZSM-5分子筛具有较好的芳构化性能;各改性HZSM-5分子筛催化剂芳构化性能变化与表面酸性有关,总酸量下降,芳构化活性下降,强B酸中心减少,深度裂解反应减少;Zn的单组分和双组分改性的HZSM-5分子筛催化剂芳构化活性的增高与表面强L酸浓度增加和吡啶吸附IR谱中的1615cm~(-1)吸收峰出现有关。     

Mo/HZSM-5丙烷芳构化催化性能及其吸附量热的研究

采用等量浸渍法制得一系列不同担载量的Ｍｏ／ＨＺＳＭ－５催化剂,运用ＸＲＤ和ＦＴＩＲ方法考察了Ｍｏ物种在催化剂表面的分散状态,首次采用微分吸一热技术对Ｍｏ／ＨｚＳＭ－５催化剂的表面酸性进行表征。同时研究了催化剂对丙烷芳构化的反应活性。结果表明：对于担载Ｍｏ的ＨＺＳＭ－５分子筛催化剂,Ｍｏ物种在ＨＺＳＭ－５分子筛表面上顺序为ＨＺＳＭ－５〉１％Ｍｏ／ＨＺＳＭ－５〉２％Ｍｏ／ＨＺＳＭ－５分子筛本身表面的酸     

镓改性ZSM-5沸石中镓活性中心的形成与表征

采用脉冲微反体系研究了经不同程度还原和不同镓含量的GaZSM-5沸石的芳构化性能与吡啶吸附红外光谱特征谱带吸收度的关联，证实了1458 cm~(-1)吸收带的用于表征与Ga物种有关的活性中心，并研究了沸石的硅铝比对Ga中心形成和Ga的价态对芳构化性能的影响。结果表明，对Ga含量相同的样品来说，硅铝比愈低，起始Ga中心生成量愈多，高价态与低价态的Ga中心对丙烷芳构化反应都有促进作用。     

Ga改性Ga/ZSM-5分子筛的结构、 性质及其催化丙烷芳构化的固体核磁共振波谱研究

采用不同的方法制备了一系列Ga改性的ZSM-5分子筛催化剂, 通过固体核磁共振波谱(ssNMR)技术对催化剂的结构和酸性进行了表征, 并考察了其催化丙烷芳构化的性能. 结合⁷¹Ga NMR、 吸附三甲基磷(TMP)探针分子的一维³¹P 和二维(2D)¹H-³¹P HETCOR NMR实验, 发现物理混合法制备的Ga₂O₃/ZSM-5样品只含有具有较弱Lewis酸性的Ga₂O₃物种, 浸渍法制备的Ga/ZSM-5-ox和浸渍后还原再氧化法制备的Ga/ZSM-5-redo 2种样品上主要以高分散的氧化镓和阳离子Ga物种为主, 而离子交换法制备的Ga/ZSM-5-IE样品上Ga主要以阳离子Ga物种的形式存在, 高分散的氧化镓和阳离子Ga物种都具有更强的Lewis酸性. Ga/ZSM-5分子筛催化丙烷芳构化反应的结果表明, Ga物种与酸性明显影响催化剂的芳构化性能, 丙烷的转化率和芳烃的选择性顺序为 Ga/ZSM-5-IE>Ga/ZSM-5-redox>Ga/ZSM-5-ox>Ga₂O₃/ZSM-5>H-ZSM-5. 2D ¹H-³¹P HETCOR NMR实验结果表明, Ga/ZSM-5催化剂上产生的Br?nsted酸和Lewis酸(阳离子以及高分散Ga物种)的协同作用提高了分子筛的催化反应活性.     

Ethylene Dehydroaromatization over Ga-ZSM-5 Catalysts: Nature and Role of Gallium Speciation

Bifunctional catalysis in zeolites possessing both Brønsted and Lewis acid sites offers unique opportunities to tailor shape selectivity and enhance catalyst performance. Here, we examine the impact of framework and extra-framework gallium species on enriched aromatics production in zeolite ZSM-5. We compare three distinct methods of preparing Ga-ZSM-5 and reveal direct (single step) synthesis leads to optimal catalysts compared to post-synthesis methods. Using a combination of state-of-the-art characterization, catalyst testing, and density functional theory calculations, we show that Ga Lewis acid sites strongly favor aromatization. Our findings also suggest Ga(framework)–Ga(extra-framework) pairings, which can only be achieved in materials prepared by direct synthesis, are the most energetically favorable sites for reaction pathways leading to aromatics. Calculated acid site exchange energies between extra-framework Ga at framework sites comprised of either Al or Ga reveal a site-specific preference for stabilizing Lewis acids, which is qualitatively consistent with experimental measurements. These findings indicate the possibility of tailoring Lewis acid siting by the placement of Ga heteroatoms at distinct tetrahedral sites in the zeolite framework, which can have a marked impact on catalyst performance relative to conventional H-ZSM-5.     

Characterization and Activity of Cr, Cu and Ga Modified ZSM—5 for Direct Conversion of Methane to Liquid Hydrocarbons

Direct conversion of methane using a metal-loaded ZSM-5 zeolite prepared via acidic ion exchange was investigated to elucidate the roles of metal and acidity in the formation of liquid hydrocarbons. ZSM-5 (SiO2/A12O3=30) was loaded with different metals (Cr, Cu and Ga) according to the acidic ion-exchange method to produce metal-loaded ZSM-5 zeolite catalysts. XRD, NMR, FT-IR and N2 adsorption analyses indicated that Cr and Ga species managed to occupy the alllmlnum positions in the ZSM-5 framework. In addition, Cr species were deposited in the pores of the structure. However, Cu oxides were deposited on the surface and in the mesopores of the ZSM-5 zeolite. An acidity study using TPD-NH3, FT-IR, and IR-pyridine analyses revealed that the total number of acid sites and the strengths of the BrSusted and Lewis acid sites were significantly different after the acidic ion exchange treatment.Cu loaded HZSM-5 is a potential catalyst for direct conversion of methane to liquid hydrocarbons. The successful production of gasoline via the direct conversion of methane depends on the amount of aluminum in the zeolite framework and the strength of the BrSnsted acid sites.     

Physicochemical and catalytic properties of Ga and In pentasils in the reaction of propane aromatization

Ga and In ZSM-5 zeolites are obtained via hydrothermal crystallization from alkali aluminosilicate gels. Their physicochemical and catalytic properties during conversion of propane into aromatic hydrocarbons are studied. These catalysts exhibit different activity and selectivity in propane aromatization process due to their specific physicochemical properties and the localization of promoter atoms in different sites of the zeolite structure. A zeolite containing 1.85 wt % of gallium oxide is the most effective catalyst for propane aromatization.     

Au/HZSM-5沸石催化剂的正丁烷异构化反应性能的研究

采用脉冲微反装置评价了纯正丁烷、含有不同比例异丁烷的混合丁烷在Au改性的纳米HZSM-5催化剂上的反应活性和异构化选择性。结果表明,在300℃时,载金量为1.31%的催化剂上纯正丁烷原料的转化率可达7.0%,异丁烷选择性可达80%以上。相比之下,在纳米HZSM-5载体上正丁烷的转化率只有0.55%,异丁烷选择性仅为11.67%。在Au负载量为0.12%~1.91%,随着Au负载量的增加,正丁烷转化率先增后减,异丁烷选择性在低负载量时增加明显。在反应温度低于400℃时,纯正丁烷在载金催化剂上主要发生异构化反应;高于400℃时,主要发生裂解和芳构化等反应,即400℃是正丁烷在脉冲微反条件下异构化和裂解等反应的分水岭。另外,混合丁烷的组成对正丁烷异构化反应有一定影响,但在适当温度下正丁烷异构化时裂解产物很少,表现出金属-酸双功能催化特征。Au⁺在反应中发挥了脱氢和加氢作用。     

CuCoMn-zeolite双功能催化剂转化生物质基合成气制取液态烃

选用四种不同的分子筛（SAPO-34, ZSM-5, Y, MCM-41）与CuCoMn（高醇合成组元）构成双功能催化剂,利用N2吸脱附、H2-TPR、XRD、NH3-TPD等表征了催化剂的结构性质. 研究了催化剂在生物质基合成气一段法制取液态烃燃料的应用. 相比于CuCoMn催化剂,加入分子筛的双功能催化剂均不同程度地提高了液体烃燃料的选择性及收率,且收率按顺序递减呈CCM-ZSM-5〉CCM-SAPO-34〉CCM-Y〉CCM-MCM-41. 同时,共沉淀法制备的CuCoMn-ZSM-5 （20wt%, Si/Al=100） 具有最佳的CO转化率（76%）及液体产物收率（30%）. 相比于CuCoMn氧化物,双功能催化剂的比表面及孔容均得到提高. CCM-ZSM-5具有适中的微孔尺寸和中等强度的酸性,增加CCM-ZSM-5中ZSM-5含量或降低ZSM-5中的Si/Al比,均有利于提高酸性位的数量,主要是较弱的酸性位. 而共沉淀法制备的CCM-ZSM-5具有更好的金属分散性及还原性能.     

Suppression of methane formation during Fisher-Tropsch synthesis using manganese-cobalt oxide supported on H-5A zeolite as a catalyst

In Fischer-Tropsch synthesis reaction, methane formation is one of the side reactions which must be suppressed in order to get better catalytic selectivity for light olefins. In the present study, we have modified cobalt based Fischer-Tropsch catalyst and developed a process to minimize methane production, consequently to produce maximum yield of light olefins. Manganese-cobalt oxide supported on H-5A zeolite catalyst was synthesized using modified H-5A zeolite, to increase its surface acid sites. Increased acidity of zeolite plays a major part in the suppression of methane formation during the Fischer-Tropsch reaction. The modified zeolite results in the electronic modification of catalyst surface by creating new active catalytic sites. The results are compared with other supported catalysts along with unmodified zeolite. Appreciable reduction in methane formation is achieved on modified zeolite supported catalyst in comparison with unsupported catalyst.     

La／HZSM—5催化剂上丙烷的芳构化反应研究

采用浸渍法和离子交换法制备了La/HZSM-5分子筛催化剂,用于丙烷芳构化反应,利用XRD,SPS,FT－IR,NH3－TPD技术考察了La对HZSM－5分子筛结构和表面酸性的影响,引入La后能显著提高HZSM－5的丙烷芳构化活性,其中由离子交换法得到的催化剂效果最佳,在反应温度550度,空速600h^-1条件下,丙烷转化率和芳烃选择性分别达到94．58％,68．99％,在La/HZSM-5中分子筛结晶度下降,B酸中心减少,L酸中心增多,离子交换法制备的催化剂比浸渍法催化剂的这种变化更显著,同时更有利于La3 进入分子筛孔道内,并与分子筛产生强相互作用,新增加的L酸中心可能是芳构化反应的活性中心。     

Synthesis and characterization of the Pt/Al2O3 systems modified with group III (Ga) and Group IV (Ge,Ti, and Zr) elements in the combined conversion of propane and n-Heptane

Under the conditions of a joint reaction of propane and n-heptane at temperatures of 460–520°C and a pressure of 0.35 MPa, the conversion of propane and the concentration of C₇₊ aromatization products on platinum-containing catalysts modified by Group III (Ga) and Group IV (Ge, Ti, and Zr) elements were higher than those on an unmodified Pt/Al₂O₃ sample. This is explained by a change in the aprotic acidity of the catalysts as a result of the support modification. The sample with the addition of gallium was most active. A plausible reason for this is the conversion of hydrocarbons at active sites that consist of Pt and Ga, which were formed upon catalyst activation. It is believed that gallium adjacent to platinum in an ionic form on the support surface acts as an aprotic acid site.     

Propane Aromatization over Mo／HZSM—5 Catalysts

Impregnation,mechanical mixing and hydrothermal treatment methods were used to introduce molybdenum species into the HZSM-5 zeolite ,the structure and surface acidity of the catalysts were studied by means of XRD,FT-IR ,NH3-TPD,TPR and XPS,The effects of Mo content and reaction time on stream on the aromatization of propane were investigated,It was found that the performance of the Mo/HZSM-5 catalst prepared by the hydrothermal treatment method was much better than that of the other two catalysts,For example ,under the reaction conditions of 823 K and 600h^-1, propance conversion and aromatics selectivity over the catalyst prepared by hydrothermal pretreatment could reach 89.17% and 78.56%,respectively,XRD and XPS results showed that the Mo species in the catalysts prepared by hydrothermal treatment were highly dispersed on the surface of the HZSM-5,and lartger amounts of them could penetrate into the HZSM-5 channel ,as compared with the other two kinds of catalysts,These factors may be responsibled for their high activities for propane aromatization,IR and NH3-TPD studies indicated that the number of Broensted acid centers decreased and the Lewis acid centers increased after Mo was introduced into the HZSM-5 zeolite.     

Spectroscopic and XRD characterisation of zeolite catalysts active for the oxidative methylation of benzene with methane

The benzene methylation with methane over zeolite catalysts was previously shown in our laboratory to require the presence of oxygen. Thus, a two-step mechanism involving the intermediate formation of methanol by partial oxidation of methane followed by the methylation of benzene with methanol in the second step, was postulated. This paper now reports the results of the characterisation of the zeolite catalysts used for the oxidative benzene methylation reaction in order to provide some information about their composition, structure, properties and their behaviour before and after the reaction. The catalysts were characterised by X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray fluorescence (XRF), FT-IR and solid state NMR. XRD results indicate that the crystalline structures of all the ZSM-5 and H-beta catalysts remained unchanged after batch reaction of benzene with methane over the catalysts in agreement with the observation that the catalysts recovered from the reactor could be reused without loss of activity. Elemental analyses and FT-IR data show that as the level of metal ion exchange increases, the Br?nsted acid concentration decreases but this metal ion exchange does not totally remove Br?nsted acidity. FT-IR results further show that only a small amount of acid sites is actually necessary for a catalyst to be active since used catalysts containing highly reduced Br?nsted acidity are found to be reusable without any loss of their activity. 29Si and 27Al magic angle spinning (MAS) NMR together with FT-IR spectra also show that all the active zeolites catalysts contain some extra-framework octahedral aluminium in addition to the normal tetrahedral framework aluminium. The presence of this extra-lattice aluminium does not, however, have any adverse effect on the crystallinity of the catalysts both before and after oxidative benzene methylation reaction. There appears also to be no significant dealumination of the zeolite catalysts during reaction since their catalytic performance was retained after use.     

Catalytic properties,surface composition,and acidity of Ga-ZSM-5 catalysts for aromatization of lower paraffins

A study has been made of the catalytic and acidic properties together with the surface composition of the zeolite HZSM-5 modified by gallium by hydrothermal treatment with a sodium gallate solution and also by impregnation with gallium nitrate solution. It has been established that the first method of introducing gallium produces a more selective catalyst for aromatization of n-butane. It has been shown that under the conditions of the catalytic reaction several types of active centers incorporating Ga are formed: Ga₂O₃ on the zeolite surface, gallium ions inside the zeolite canals, and gallium atoms at the surface of and in the lattice that are bonded to OH groups.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2726–2732, December, 1991.     

Propane Aromatization over Mo/HZSM-5 Catalysts

Impregnation, mechanical mixing and hydrothermal treatment methods were used to introduce molybdenum species into the HZSM-5 zeolite. The structure and surface acidity of the catalysts were studied by means of XRD, FT-IR, NH3-TPD, TPR and XPS. The effects of Mo content and reaction time on stream on the aromatization of propane were investigated. It was found that the performance of the Mo/HZSM-5 catalyst prepared by the hydrothermal treatment method was much better than that of the other two catalysts. For example, under the reaction conditions of 823 K and 600 h-1, propane conversion and aromatics selectivity over the catalyst prepared by hydrothermal pretreatment could reach 89.17% and 78.56%, respectively. XRD and XPS results showed that the Mo species in the catalysts prepared by hydrothermal treatment were highly dispersed on the surface of the HZSM-5, and larger amounts of them could penetrate into the HZSM-5 channel, as compared with the other two kinds of catalysts. These factors may be responsi     

ZnO—Ga2O3／HZSM—5分子筛催化剂对C3—4烷烃芳构化反应的催化作用

用浸渍法将Ga、Zn以氧化物的形式负载于HZSM－5上,研究了其对C3－4烷烃芳构化的催化活性。结果表明,分别加入2％Ga和2％Zn后,当温度为520℃、空速为0．76h^-1时,具有较高的催化活性和芳烃选择性;反应进行100h后,催化活性无明显降低,显示出对C3－4烷烃芳构化良好的稳定性。用TPD和正丁胺Hammett酸性滴定法,测定了催化剂的表面酸性,发现加入Ga、Zn等组分后,催化剂的总酸量变化不大,而酸强度却有所增加;加入Zn组分后,催化剂的孔径变小,对二甲苯选择性增加。     

The kinetics of hydrocarbon conversion on ZSM-5 zeolites

The complete oxidation of hydrocarbons with various structures (methane, n and wo-pentanes, cyclohexane, and benzene) on copper-modified ZSM-5 zeolite and the aromatization of propane on H-ZSM-5, are studied to analyze diffusion effects on the reaction kinetics. Comparison of the kinetic parameters of complete oxidation shows that the process rate and the rate law strongly depend on the reactant structure. Apparently, n-pentane oxidation is controlled by kinetics; the kinetics for other hydrocarbons depends on diffusion inside zeolite channels to different degrees. In the case of propane aromatization, its dehydrogenation and cracking, as well as the formation of aromatics from olefins, occurs on different active sites. Propane conversion is supposed to occur inside the zeolite channels, and the aromatization of olefins occurs on the outer surface of the zeolite crystal Deceased.     

Control of the properties of catalysts for methane aromatization by synthesizing ZSM-5 zeolites with different crystallite sizes

MFI zeolite materials (ZSM-5) with crystal sizes in the range from 0.10 to 1.70 μm have been synthesized. Acidic and surface properties, phase and morphological composition of the prepared zeolites have been studied by the IR sprectroscopy, nitrogen porosimetry, XRD, and scanning electron microscopy. Increasing crystal size was shown to decrease the general acidity of the zeolite. Synthesized zeolites served as supports for molybden-containing catalysts for methane aromatization prepared by using the solid phase synthesis approach. Diffuse reflectance IR spectroscopy, thermoprogrammed desoption of ammonia and ²⁷Al NMR spectroscopy were used to characterize the physicochemical properties of the catalysts. An increase in the crystallite size of the zeolite favors a decrease in the acidity of the catalysts and inhibits the formation of alumina molybdate during the catalyst preparation. As a result, a tendency to coke formation is suppressed and the performance of the catalysts in methane aromatization improved: methane conversion and aromatic hydrocarbon yield increase.