TiO2纳米粒子膜表面性质的研究

ＴｉＯ_２纳米粒子膜在光催化降解大气和水中的污染物［１］、光电转换［２］、光致变色［３］等方面有广阔的应用前景,近年来受到了科学界的高度重视．研究表明,膜的表面性质对如上应用有着重要影响．本文采用等离子体化学气相沉积法（ＰＥＣＶＤ法）［４］制备了ＴｉＯ２的纳米粒子膜,分别采用ＴｉＣｌ４等离子体或Ｏ２等离子体处理膜表面,获得两种不同表面性质的ＴｉＯ２纳米粒子膜;并利用表面光电压谱（ＳＰＳ）和电场诱导表面光电压谱（ＥＦＩＳＰＳ）技术对膜的表面性质进行具体分析,探讨了其在光催化领域的可能应用．１实验部…     

新金刚石电子结构的第一性原理研究

金刚石、 石墨和卡宾碳是三种常见的碳同素异构体, 其外层轨道价电子分别是以sp³-, sp²-和sp¹-形式杂化而成的^［1］. 1991年, Hirai等^［2］在研究金刚石的形成机理时, 发现了一种新的碳同素异构体, 并将其命名为新金刚石(new diamond) ^{［3, 4］}. 在许多实验过程中虽然也曾获得过新金刚石^［5~11］, 但是这些实验获得的新金刚石的样品产量都较少, 且新金刚石的颗粒尺寸都很小(小于100 nm), 因此只能采用电子衍射(ED)的方法研究其结构. Jarkov等^［9］在分析多晶体ED图谱的基础上, 认为新金刚石是面心立方结构(FCC), 其晶格常数为0.357 nm. 2001年, Konyashin等^［1］通过ED图谱、电子能量损失谱和半经验的能量计算认定新金刚石为FCC的纯碳, 其晶格常数为0.356 3 nm. 我们曾用强磁场碳黑催化法制备出大量的新金刚石^{［3,4,12~14］}, 并对新金刚石的热稳定性进行了研究^［12］, 而对其结构和性能的研究尚未见报道.     

大功率激光制备a-C和a-C∶H类金刚石膜的光学性能研究

采用大功率高重复频率准分子激光溅射热解石墨靶制备了类金刚石碳膜, 研究了实验条件对类金刚石膜光学性能的影响, 发现氢可以提高膜中sp3键的含量和膜的光学透过率. 在实验参数范围内, 膜的光学性能随着氢压的增加而提高. 根据类金刚石膜的反应沉积机理对上述结果进行了分析、解释.     

球烯－C60和C70的纸制模型

球烯－Ｃ_（６０）和Ｃ_（７０）的纸制模型曹玲华，刘育亭（新疆大学化学系８３００４６）球烯－Ｃ６０和Ｃ７０是具有固定组成和特殊结构的碳素多面体原子簇，是继金刚石和石墨之后，新发现的碳的同素异形体［１，２］。由于它特殊的结构和形态，已引起人们高度的重视。...     

大功率激光制备a-C和a-C∶H类金刚石膜的光学性能研究

采用大功率高重复频率准分子激光溅射热解石墨靶制备了类金刚石碳膜,研究了实验条件对类金刚石膜光学性能的影响,发现氢可以提高膜中sp3键的含量和膜的光学透过率.在实验参数范围内,膜的光学性能随着氢压的增加而提高.根据类金刚石膜的反应沉积机理对上述结果进行了分析、解释.     

活性亚甲基化合物的电解氧化偶联反应

在有机合成上，活性氢化合物的偶联是形成碳－碳键的重要方法之一［１，２］。其偶联一般用化学方法在强碱的作用下得到碳负离子，继而用弱氧化剂Ｉ２［３］、ＣｕＢｒ２［４］、ＡｇＮＯ３［５］等将碳负离子变成游离基偶联而成。１９６４年，Ｔｏｓｈｉｈｉｋｏ报道了在...     

纳米金刚石球晶的激光溅射产生与透射电镜表征

在高温高压合成金刚石技术日趋成熟的同时，气相沉积（CVD）条件下实现常压金刚石膜的合成已倍受人们的关注．利用脉冲激光溅射石墨，发现可在一定的基底上获得一类具有某些金刚石特征的薄膜，即类金刚石碳膜（DLC）［‘－‘j．这为在常规条件下合成金刚石带来了新的希望．但DLC只具有金刚石的某些特征，而基本上不具备晶体的有序结构［”’j．我们曾报道了在激光液相溅射的产物中观察到众多的碳球D‘，并通过高分辨透射电镜（HREM）、选区衍射（SAED）及其它相关实验，确定了其具有金刚石结构．且实验部分实验所用的激光是Q开关Nd…     

Fe-W非晶镀层的磷化及在NaCl溶液中的腐蚀行为

ＦｅＷ非晶态合金镀层在酸性溶液中具有高耐蚀性能,但在中性和碱性溶液,特别是在氯化钠溶液中耐蚀性能差［１］,如在３０℃、１ｍｏｌ／ＬＨＣｌ溶液中,ＦｅＷ非晶镀层的腐蚀速率约为不锈钢ＳＵＳ３０４的１／１５;在６０℃、０５ｍｏｌ／ＬＨ２ＳＯ４溶液中约...     

α－石英表面自由基和离体肺泡巨噬细胞内游离Ca~（2＋）、Mg~（2＋）浓度的关系

本文用ＡＲ－ＣＭ－ＭＩＣ阳离子测定系统及Ｆｕｒａ－２荧光技术，研究了研磨后表面存在自由基的α－石英，和离体肺泡巨噬细胞作用后细胞内游离Ｃａ２＋浓度（［Ｃａ２＋］）和游离Ｍｇ２＋浓度（［Ｍｇ２＋］ｉ）的关系．发现在含Ｃａ２＋和Ｍｇ２＋的介质中，α－石英表面自由基越多，［Ｃａ２＋］ｉ和［Ｍｇ２＋］ｉ升高越大；在无Ｃａ２＋和Ｍｇ２＋的介质中，新研磨的α－石英能引起［Ｃａ２＋］ｉ和［Ｍｇ２＋］ｉ升高．Ｃａ２＋和Ｍｇ２＋的升高可能部分由于细胞内结合钙和结合镁的释放．     

掺硼金刚石膜/碳膜平面式复合电极的制备及电化学性能

采用微波等离子体化学气相沉积法在本征硅上制备掺硼金刚石膜/碳膜平面式复合电极,其中硅片的一面为掺硼金刚石膜,另一面为碳膜。通过SEM和拉曼光谱分析了薄膜的表面形貌和成分,掺硼金刚石膜为纳米级金刚石,碳膜表面有均匀分布的凹坑;利用四探针、循环伏安法和交流阻抗法表征电极导电性和电化学性能,随着沉积时间增加,电极方阻减小;在铁氰化钾溶液中电极发生准可逆氧化还原反应,电势差为119mV,在103Hz附近阻抗为113Ω;多巴胺的检测限为5μmol·L-1。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.