Ce1-xFexO2复合氧化物催化剂的制备及其对甲烷的催化燃烧性能

采用柠檬酸溶胶-凝胶法和微波技术制备了Ce1-x Fex O2复合氧化物，以甲烷催化燃烧为探针反应测定了催化剂的活性及XRD、DRS、BET和TPR进行了表征。结果表明，Ce1-x Fex O2复合氧化物为介孔材料，所制得的复合氧化物在x≤0．2时以单一立方萤石结构的Ce1-x Fex O2固溶体存在，x〉0．2时形成了立方萤石结构Ce1-x Fex O2固溶体和少量的CeFeO3混合相。Ce1-x Fex O2固溶体的甲烷催化燃烧活性高于单组分CeO2，且随着x的不同而变化，其中以Ce0.9 Fe0.1 O2固溶体的催化活性最高。     

纳米CeO2基固溶体催化柴油机碳颗粒物燃烧性能

采用柠檬酸溶胶鄄凝胶法制备CeO2基固溶体催化剂(Ce0.7Zr0.3O2-δ、Ce0.7Pr0.3O2-δ和Ce0.7Gd0.3O2-δ), 并考察了固溶体和三种常用载体(TiO2、SiO2和Al2O3)及其负载KNO3后的催化碳黑燃烧活性. 结果表明, CeO2基固溶体催化剂具有很高的催化燃烧活性, 其活性接近TiO2、SiO2和Al2O3负载30%KNO3催化剂的活性. 因为纳米CeO2基固溶体的形成, 提高了催化剂的抗烧结能力, 使氧更活泼, 从而提高氧化还原性能, 有利于碳颗粒燃烧. 由于CeO2基固溶体本身的高活性, 因此KNO3的添加不能明显提高CeO2基固溶体催化剂(尤其是Ce0.7Zr0.3O2-δ和Ce0.7Pr0.3O2-δ)的催化燃烧活性, 但KNO3能显著提高TiO2, SiO2和Al2O3的催化燃烧活性.     

CeO2／BaMnAl11O19-a催化剂制备及甲烷催化燃烧研究

采用反相微乳液法制备了BaMAl11O19-a(M=Mn，Co，Ce)催化剂，研究了M对催化剂相组成、比表面积和甲烷催化燃烧活性的影响．Mn促进六铝酸盐的形成，Mn基催化剂比表面积虽低，甲烷燃烧活性却较高．Ce基催化剂的热稳定性高，比表面积大幅度增加，但甲烷催化燃烧活性比Mn基催化剂低．Ce和Mn的共同作用使CeO2／BaMnAlO19-a催化剂不仅比表面积较大，而且具有较高的甲烷燃烧活性．在100h连续试验中，CeO2／BaMnAl11O19-a催化剂活性稳定，有望成为催化热汽轮机燃烧器的潜在催化剂之一．     

CeO2—LnO1.5固溶体的表征及其甲烷催化燃烧性能

向CeO2中引入Ln3 离子后形成的CeO2－LnO1.5（Ln=La，Nd，Sm，Gd）固溶体（n（Ce）：n（Ln）=1：1）是一种无贵金属的新型高效甲烷燃烧催化剂．比表面、XRD、Raman、TEM等分析证实，这类固溶体具有部分畸变的萤石结构，Ln3 进入晶格后诱发的结构变化使得团溶体的表面和本体能同时参与氧化还原反应．实验表明，该固态溶液体系是甲烷催化燃烧的良好催化剂．     

CeO2/BaMnAl11O19-α催化剂制备及甲烷催化燃烧研究

采用反相微乳液法制备了BaMAl11O19-α (M=Mn, Co, Ce)催化剂,研究了M对催化剂相组成、比表面积和甲烷催化燃烧活性的影响.Mn促进六铝酸盐的形成,Mn基催化剂比表面积虽低,甲烷燃烧活性却较高.Ce 基催化剂的热稳定性高,比表面积大幅度增加,但甲烷催化燃烧活性比Mn基催化剂低.Ce和Mn的共同作用使CeO2/BaMnAl11O19-α催化剂不仅比表面积较大,而且具有较高的甲烷燃烧活性.在100 h连续试验中,CeO2/BaMnAl11O19-α催化剂活性稳定,有望成为催化热汽轮机燃烧器的潜在催化剂之一.     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n(Ce)/n(Zr)比为0.67/0.33,用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体.采用这些固溶体作载体,以Fe2O3为活性组分,用浸渍法制备了一系列催化剂.BET结果显示,将适量Ce0.67Zr0.33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积.TPR结果显示,载体中引入适量的Ce0.67Zr0.33O2可以改善催化剂的氧化还原性能.XRD结果表明,Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况,老化前后催化剂的晶相结构基本无明显变化.特别是当载体中m(Ce0.67Zr0.33O2)∶m(Al2O3)的值为1∶2时,Fe2O3/CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能.     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n(Ce)/n(Zr)比为0.67/0.33, 用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体. 采用这些固溶体作载体, 以Fe2O3为活性组分, 用浸渍法制备了一系列催化剂. BET结果显示, 将适量Ce0.67Zr0.33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积. TPR结果显示, 载体中引入适量的Ce0.67Zr0.33O2可以改善催化剂的氧化还原性能. XRD结果表明, Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况, 老化前后催化剂的晶相结构基本无明显变化. 特别是当载体中m(Ce0.67Zr0.33O2)∶m(Al2O3)的值为1∶2时, Fe2O3/CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能.     

Co掺杂CeO2-ZrO2固溶体催化剂甲烷催化燃烧性能的研究

制备了一系列Co掺杂的CeO2-ZrO2固溶体催化剂,考察了其用于甲烷催化燃烧的反应性能.同时,对反应气体总空速、制备方法和焙烧温度等条件对催化剂反应性能的影响进行了研究.并对其进行了BET比表面、XRD等表征分析.结果表明:Ce-Zr-Co-O系列催化剂对于甲烷催化燃烧反应具有良好的活性和稳定性,Co的加入能显著提升...     

二氧化铈表面氧的活化及对氧化反应的催化作用

稀土催化材料的研究和发展为La和Ce等高丰度稀土元素的高质、高效利用提供了有效的途径．Ce基催化剂由于具有优异的储放氧性能,在氧化反应中得到广泛应用．本文介绍了采用理论模拟的方法,在研究Ce的4f轨道和结构弛豫对CeO2氧空位的形成和迁移中的作用以及作为载体时助催化作用的最新研究成果,提出了铈锆固溶体高储放氧性能的本质原因,为进一步制备高性能的氧化铈基储放氧材料和催化剂提供了理论基础．同时,对铈基催化剂在甲烷催化燃烧、CO催化氧化和卤代烃催化燃烧等反应中的应用和催化作用进行了综述,重点讨论了CeO2及其复合催化剂的氧化还原性能与其活性之间的关系．最后对在铈基催化剂研究中存在的问题和发展思路提出了思考和展望．     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n（Ce）／n（Zr）比为0．67／0．33,用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体,采用这些固溶体作载体,以Fe2O3为活性组分,用浸渍法制备了一系列催化剂,BET结果显示,将适量Ce0.67Zr0．33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积,TPR结果显示,载体中引入适量的Ce0．67Zr0.33O2可以改善催化剂的氧化还原性能,XRD结果表明,Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况,老化前后催化剂的晶相结构基本无明显变化,特别是当载体中m（Ce0.67Zr0.33O2）：m（Al2O3）的值为1：2时,Fe2O3／CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.