新型金属—双二硫杂戊烯（M—BDT）配合物的合成,表征及X射线的？…

合成了４个新型Ｎｉ－ＢＤＴ配位化合物,ＢＤＴ为具有９个Ｓ原子的杂戊烯,元素分析、ＩＲ谱、ＵＶ谱确定这４个新配合物的化学式分别为「（ＣＨ３）４Ｎ」２「Ｎｉ（Ｃ５Ｓ９（２」「（Ｃ２Ｈ５）４Ｎ」２·「Ｎｉ（Ｃ５Ｓ９）２」（２）,「（Ｃ４Ｈ９）４Ｎ」２「Ｎｉ（Ｃ５Ｓ９）２」（３）,「（Ｃ６Ｈ５）（ＣＨ５）３Ｎ」２「Ｎｉ（Ｃ５Ｓ９）２」（４）,采用Ｉｔｏ法对配合物１的Ｘ射线粉末图进行了指标化,确定该晶体属单     

RE[CH2（CH2）4CONC4H9]3（NO3）3（RE=La,Dy）的合成和晶体结构

采用Ｘ－射线四园衍射仪测定了Ｄｙ「Ｃｈ２（ＣＨ２）４ＣＯＮＣ４Ｈ９」３（ＮＯ３）３和Ｌａ「ＣＨ２（ＣＨ２）４ＣＯＮＣ４Ｈ３」３（ＮＯ３）３的晶体结构。两个配合物具有相似的结构，均属单斜晶系，空间群为Ｐ２１／ｃ。晶体参数：Ｄｙ「Ｌａ」：ａ＝１．８５６４（３）「１．８５６４（２）」ｎｍ，ｂ＝０．９７６９（２）「０．９８３４（１）」ｎｍ，ｃ＝２．１８６３（６）「２．２００３８（７）」ｎｍ，β＝９６．０８     

具有不同类型桥基的双核Cu（Ⅱ）—Schiff碱配合物的合成 …

合成了３个分别以Ｃ２Ｏ＾２－４（「Ｃｕ２（Ｌ１）２（ｏｘ）」，１），ＡｃＯ＾－（「Ｃｕ２（ＡｃＯ）（Ｌ２）２」ＢＦ４，２）和酚氧（「Ｃｕ２９Ｌ３０２」（ＣｌＯ４）２，３）为桥基的双核铜配合物，并测定了１的复配合物「Ｃｕ２（Ｌ１）２（ｏｘ）」「Ｆｅ（ＯＨ）２（Ｈ２Ｏ）４」ＣｌＯ４．Ｈ２Ｏ及２和３的晶体结构。     

N—苄基—3（S）—邻基二甲酰亚胺基—4（S）—[4（S）—2,2—二甲基— …

以Ｌ－抗坏血酸（１）为原料,经３步反应制得（Ｓ）－缩异丙氧叉甘油醛（４）,该手性醛与苄胺缩合制得相应的手性亚胺（５）,甘氨酸经保护后制成酰氯,在有机碱作用下首都首先生成不稳定的烯酮（８）,继与手性亚胺５迅速进行「２＋２」环加成反应,合成标题化合物Ｎ－苄基－３（Ｓ）－邻苯二甲酰亚胺基－４（Ｓ）－「４（Ｓ）－２,２－二甲基１,３－二氧环戊－４－基」－２－氧吖丁啶,由于环加成的面向立体选择性容易控制,由     

柄型茂金属化合物（Ⅲ）

１,２－二（１－茚基）四甲基二硅烷相继与本基锂及ＭＣｌ４·２ＴＨＦ作用。生成四甲基二硅桥连二（１－茚基）钛和锆化合物（Ｍｅ２ＳｉＳｉＭｅ２）「Ｉｎｄ」２ＣＭｌ２「Ｍ＝（Ｔｉ（１）,Ｚｒ（２）」,对其进行催化氢化,得到相应的四氢茚基化合物（Ｍｅ２ＳｉＳｉＭｅ２）「ＩｎｄＨ４」２ＭＣｌ２「Ｍ＝Ｔｉ（３）,Ｚｒ（４）」通过元素分析,ＭＳ和ＨＮＭＲ谱表征了化合物的分子结构,并了在ＭＡＯ的助催化下,化合物３     

Raney Cu催化剂制备规律的研究Ⅰ.碱抽提动力学模型建立

恒压下,跟踪测定析氢体积（Ｖ）,考察了氢氧化钾水溶液与Ｃｕ２７．１Ａｌ７２．９合金反应的动力学。在实验结果的基础上,提出了理想模型,并推导出了下述机理型动力学式：ｍｑｔ＝－（１／３）ｌｎ「（１＋ｑＲ１）／（１＋ｑＲ０）」＋（１／６）ｌｎ（「（ｑＲ１）＾２－（ｑＲ１）＋１」／「ｑＲ０）＾２－（ｑＲ０）＋１」）－（１√ｅ）（ａｒｃｔｇ「２√３）（ｑＲ１－１√２）」－ａｒｃｔｇ「（２√３）（ｑＲ０－１／     

ω—氯代烷氧基杯[4]芳烃的合成

杯「４」芳烃以Ｃｌ（ＣＨ２ＣＨ２Ｏ）ｎＴｓ（ｎ＝１，２）烷基化。得到６５－８７％的下缘带有２－氯乙氧基和２－（２－氯乙氧基）乙氧基怀「４」芳烃。     

取代型钨镓杂多配合物的导电性及其磁性

合成了过渡金属取代的钨镓杂多配合物α－Ｎａ７「ＧａＷ１１Ｃｏ（Ｈ２Ｏ）Ｏ３９」．１６Ｈ２Ｏ，α－Ｎａ７Ｈ２「ＧａＷ１０Ｃｏ２（Ｈ２Ｏ）２Ｏ３９」．１６Ｈ２Ｏ和α－ＮａｎＨｍ「ＧａＷ９ＭＥ（Ｈ２Ｏ）３Ｏ３７」．１６Ｈ２Ｏ「Ｍ＝Ｃｏ（Ⅱ），Ｎｉ（Ⅱ，）Ｖ（Ⅴ）」，通过红外，紫外，ＩＣＰ，ＴＧ－ＤＴＡ，ＥＰＲ，ＸＰＳ，＾１８３ＷＮＭＲ，极谱等手段进行了表征。     

多联吡啶钴(Ⅱ)、锰(Ⅱ)配合物的合成及结构

报道了３个取代多联吡啶配体「４－苯基－２，２′６′，２″－三联吡啶（Ｌ１），４′，４″－二苯基－２，２′：６′，２″：６″，２－四联吡啶（Ｌ２）和４′，４″－二苯基－２，２′：６′，２″：６″，２：６，２：６，２－五联吡啶（Ｌ３）」的４个过渡金属配合物「Ｃo（Ⅱ）（Ｌ１）２」（Ｃ１Ｏ４）２（ＣＨ３ＣＮ）（１），「Ｃo（Ⅱ）（Ｌ２）（ＡcＯ）（Ｈ２Ｏ）」（Ｃ２Ｏ４）（２），「Ｍn（Ⅱ）（ＡcＯ）（Ｌ２）     

1,2,4-三唑并[3,2-d][1,5]-苯并氧氮杂（艹/卓）化合物的合成

苯并二氢吡喃－４－酮的芳腙（１）衍生的偶氮基碳正离子（３）与腈发生１,３－偶极环加成反应,加成产物（４）通过「１,２」－迁移扩环重反应,形成新颖的三环系杂环化合物１,２,４－三唑并「３,２－ｄ」「１,５」－苯并氧氮杂Ｚｈｕｏ化合物５ａ－５ｋ。     

负载金属对MoO3-TiO2光催化剂结构与催化性能的影响

用溶胶-凝胶和浸渍-还原相结合的方法制得M/MoO3-TiO2 (M=Pd, Cu, Ni和Ag)光催化剂。利用X-射线衍射(XRD)、程序升温还原(TPR)、红外光谱(IR)、程序升温脱附(TPD)、紫外-可见漫反射光谱(UV-VisDRS)和光反应等技术，研究了负载金属复合半导体的物相结构、吸附性能、吸光性能和光催化反应性能。结果表明，金属M(M=Pd, Cu)负载在复合半导体上，延迟了TiO2由锐钛矿向金红石相的转化，增强了Mo与载体TiO2的相互作用，促进Mo物种由四面体配位向八面体配位转化，使TiO2光吸收限发生蓝移，对可见光部分的吸收明显增加，拓宽了催化剂的光响应范围；固体材料吸光性能强弱顺序Pd/MoO3-TiO2 >Cu/MoO3-TiO2>Ag/MoO3-TiO2>Ni/MoO3-TiO2；Pd对CO2吸附能力过强，卧式吸附态脱附温度高，光催化效率不高；金属Cu对CO2吸附能力适中，CO2与C3H6脱附温度较接近，实现了光-表面-热的协同作用，光量子效率最高。     

复合半导体负载金属材料光催化性能研究

CO₂和烃类光催化直接合成烃类氧化物在合成化学、碳资源利用和环境保护等方面均有重大意义。用溶胶-凝胶和浸渍-还原相结合的方法制得M/V₂O₅-TiO₂(M=Pd、Cu、Ni和Ag)光催化剂。利用XRD、TPR、IR、TPD、UV-Vis DRS和光反应器等技术研究了负载金属复合半导体的物相结构、吸附性能、光吸收性能和光催化反应性能。结果表明：金属负载在复合半导体上延迟了TiO₂由锐钛矿向金红石相的转化,增强了V与载体TiO₂的相互作用,使TiO₂光吸收限发生蓝移,对可见光部分的吸收明显增加,拓宽了催化剂的光响应范围;材料吸光性能强弱顺序Pd/V₂O₅-TiO₂ >Cu/V₂O₅-TiO₂ >Ag/V₂O₅-TiO₂>Ni/V₂O₅-TiO₂;材料的吸附性能及反应物的吸附态是反应发生的关键,CO₂在Ag/V₂O₅-TiO₂表面无法形成卧式吸附态,没有目的产物甲基丙烯酸(MAA)生成,光量子效率低;光吸收性能较好的Pd/V₂O₅-TiO₂对CO₂吸附能力过强,卧式吸附态脱附温度高,光催化效率不高;Cu/V₂O₅-TiO₂对CO₂吸附能力适中,CO₂与C₃H₆脱附温度较接近,实现了“光-表面-热”的协同作用,光量子效率最高,达15.1%。     

Photoresponsive water‐dispersible polyaniline nanoparticles through template synthesis with copolymer micelle containing coumarin groups

A novel kind of photosensitive water‐dispersible polyaniline (PANI) nanoparticles was designed and prepared by template synthesis using a photo‐responsive vinyl‐coumarin (VM)/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) copolymer micelle containing coumarin moieties. The resulting PANI nanoparticles exhibited reversible photo‐crosslinking and photo‐decrosslinking behavior similar to coumarin moiety upon irradiation with different UV light as verified by UV–vis absorption. In addition, photoinduced size change of the PANI nanoparticles after 365 nm UV light irradiation was successfully monitored by dynamic light scattering and transmission electron microscopy measurements, further confirming the photosensitivity of the obtained PANI nanoparticles by the incorporation of VM/AMPS copolymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Total Synthesis of (±)-α-Acoradiene via Intramolecular Photoaddition and Reductive Cyclobutane Cleavage

(±)-α-Acoradiene (4) has been synthesized from 3-methoxy-2-cyclohexenone by a sequence of 8 steps. The key steps (Scheme 6) are the regio- and stereoselective photo[2+2]addition 7→6 and the reductive fragmentation 6→5 .     

A photo‐oxidizable kinetic pathway of three‐component photoinitiator systems containing porphrin dye (Zn‐tpp), an electron donor and diphenyl iodonium salt

A series of kinetic experiments were conducted involving visible‐light activated free radical polymerizations with three‐component photoinitiators and 2‐hydroxyethyl methacrylate (HEMA). Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor and an electron acceptor. To compare kinetic efficiency, we used thermodynamic feasibility and measured kinetic data. For this study, 5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin zinc (Zn‐tpp) and camphorquinone (CQ) were used as the PSs. The Rehm‐Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. Using the thermodynamic feasibility, we suggest two different kinetic mechanisms, which are (i) photo‐reducible series mechanism of CQ and (ii) photo‐oxidizable series mechanism of Zn‐tpp. Kinetic data were measured by near‐IR spectroscopy and photo‐differential scanning calorimetry based on an equivalent concentration of excited state PS. We report that the photo‐oxidizable series mechanism using Zn‐tpp produced dramatically enhanced conversions and rates of polymerizations compared with those associated with the photo‐reducible series mechanism using CQ. It was concluded from the kinetic results that the photo‐oxidizable series mechanism efficiently retards back electron transfer and the recombination reaction step. In addition, the photo‐oxidizable series mechanism provides an efficient secondary reaction step that involves consumption of the dye‐based radical and regeneration of the original PS. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3131–3141, 2009     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

Visible and near-infrared light activated azo dyes

The photoisomerization properties of azo derivatives have been widely used in the fields of materials and biology.One serious restriction to the development of functional azo-based materials is the necessity to trigger switching by UV light,which damage the corresponding surfaces and penetrate only partially through the matter.Therefore,developing the visible and near-infrared light activated azo switches can solve this problem.This review provides a summary of molecular design strategies for driving the isomerization of azo derivatives with visible light and near-infrared light:(1) smart design directly excited by visible light,(2) the addition of upconversion nanoparticles,(3) the employment of twophoton absorption,(4) indirect excitation in combination with metal sensitizer.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Time‐delayed photo‐induced depolymerization of poly(phthalaldehyde) self‐immolative polymer via in situ formation of weak conjugate acid

Poly(phthalaldehyde) (PPHA) can be used as a structural material in transient devices and photo‐catalytically depolymerized at the end of device life by the use of a photo‐acid generator (PAG). However, device degradation requires the presence of a radiation source at the end of device mission. It has been found that the onset of PPHA depolymerization after PAG photo‐exposure can be delayed by incorporation of a particular weak bases in the PPHA/PAG mixture. This method of delayed PPHA depolymerization allows for PAG activation prior to or during device deployment when the device is under full user control. The basicity of specific lactams and amides was found to slow the PPHA depolymerization, giving the transient device a longer but finite mission lifetime. The weak base reacts with the photo‐generated strong acid to form a weak conjugate acid, which reacts more slowly with PPHA to extend the onset of PPHA depolymerization. The addition of a molar excess of specific lactams or amides, with respect to PAG, maintains PPHA stability and mechanical properties for more than 80 minutes after photo‐exposure at room temperature. The amide or lactam mediated acid activation of PPHA follows first‐order kinetics. The time delay of PPHA depolymerization can allow for prelaunch photo‐exposure and eliminates the need for postmission photo‐exposure where reliable light‐sources may not be available.     

Lewis Acid-Mediated Radical Stabilization and Dynamic Covalent Bonding: Tunable,Reversible and Photocontrollable

This work describes a strategy not only to isolate a dynamically stable radical with physical property tunability, but to efficiently regulate the radical dissociation with reversibility and photo controllability. The addition of Lewis acid B(C₆F₅)₃ (BCF) into the solution of a radical σ-dimer ( 1-1 ) led to a stable radical ( 1 ⋅-2B), which has been characterized by EPR spectroscopy, UV/Vis spectroscopy and single crystal X-ray diffraction, in conjunction with theoretical calculation. The radical species is stabilized mainly by captodative effect, single electron transfer and steric effect. The absorption maximum of the radical can be tuned by using different Lewis acids. Dimer 1-1 can be achieved back by addition of a stronger base into the solution of 1 ⋅-2B, exhibiting a reversible process. By introducing a photo BCF generator, the dissociation of the dimer and the formation of the radical adduct become photocontrollable.