回旋加速器虚拟样机技术进展

基于缩短开发周期、降低物理样机成本及实现创新设计的目的, 虚拟样机(VP)技术被用于低能回旋加速器的设计中. 本文介绍了华中科技大学在回旋加速器VP技术研究上的进展. 提出了面向多学科协同设计的回旋加速器虚拟样机开发思路, 描述了基于Python脚本语言混合编程技术的VP集成平台. 在该平台下, 通过多个设计组件的支持与协作, 可实现对主磁铁、高频腔和中心区等关键部件及回旋加速器整机的优化设计.     

回旋加速器虚拟样机技术进展

基于缩短开发周期、降低物理样机成本及实现创新设计的目的,虚拟样机(VP)技术被用于低能回旋加速器的设计中.本文介绍了华中科技大学在回旋加速器VP技术研究上的进展.提出了面向多学科协同设计的回旋加速器虚拟样机开发思路,描述了基于Python脚本语言混合编程技术的VP集成平台.在该平台下,通过多个设计组件的支持与协作,可实现对主磁铁、高频腔和中心区等关键部件及回旋加速器整机的优化设计.     

中国散裂中子源旋转线圈测量系统研制

中国散裂中子源(CSNS)加速器主要由一台直线加速器、一台快循环加速器以及低能、高能输运线组成。针对CSNS加速器部分直流磁铁研制了一套旋转线圈测量系统。对系统的研制方案、功能、精度、完成的磁铁类型以及部分测量结果进行介绍。该系统解决了CSNS批量磁铁之间的不同中心高度、质量、有效长度、磁场强度的兼容性难题。经过测试运行,积分场测量重复性误差好于±0.02%,空间谐波重复性误差好于0.005%,磁中心测量重复性误差好于±0.03 mm,顺利完成了中国散裂中子源工程150台多种类型磁铁的检测任务。     

国产首台交变相位聚焦漂移管加速器的冷测与试运行

质子直线注入器是质子治癌系统的重要组成部分。出于项目进度的考虑,上海先进质子治癌示范装置APTRON采用了进口自美国的直线注入器。为了加快质子治癌产业进程,掌握质子放疗关键技术,保证产业链安全可控,注入器团队研发了国产医用质子直线注入器。该直线注入器采用了电子回旋共振（ECR）离子源和四翼型射频四极加速器（RFQ）的技术方案,并在漂移管加速器（DTL）段创新性地采用了交变相位聚焦（APF）结构。在这个过程中,通过研究APF DTL的束流运动规律和设计思想,自主开发了APF DTL的底层物理设计软件,相继完成了物理设计、电磁设计、机械设计、加工建造、腔体冷测、高频老练和载束实验等多个阶段的工作,最终成功引出了7 MeV、7 mA的质子束流。经过束诊系统的测量分析,认定束流中心能量为6.975 MeV,动量分散在±0.35%以内的束流流强为6.07 mA。成为国产首台医用质子直线注入器和首个实现成功载束的APF加速腔。     

中国散裂中子源直线加速器束流流强测量系统

介绍了中国散裂中子源(CSNS)直线加速器(Linac)采用的自主研制的束流变压器(BCT)系统。根据CSNS Linac的束流参数、加速器管道的横向孔径和纵向空间,专门设计了BCT进行束流宏脉冲流强的测量。在CSNS Linac试运行阶段成功地测量到了负氢粒子束流的宏脉冲信息,给调束运行提供了有利的保障和支撑。     

用于中子位置灵敏探测器的SiPM性能研究

为满足中国散裂中子源(China Spallation Neutron Source,CSNS)工程材料衍射谱仪的探测器需求,CSNS探测器组设计并研制了基于硅光电倍增管(Silicon Photomultiplier,SiPM)读出的闪烁体探测器。本工作针对该探测器,选取了Sensl MicroFJ-30035-TSV和Hamamatsu S13363-3050NE-16两种型号的SiPM,开展了其击穿电压、增益、温度特性、暗计数率等关键性能的测试。测试结果显示,两者单光子分辨能力,增益、暗计数率等性能均可满足当前闪烁体探测器需求,相同过偏压下,前者增益高于后者,且Hamamatsu SiPM增益对温度更敏感。测试了两SiPM的温度补偿系数分别为22.0 mV/℃(Sens1)和53.6 mV/℃(Hamamatsu),为后续SiPM温度补偿电路设计奠定了基础。利用研制的探测器工程样机,在CSNS BL09下测试了两种SiPM读出的探测器对2.8 ?中子探测效率分别为76%和68%,为目标探测器及同类型探测器的SiPM选型提供了参考。     

第二讲散裂中子源和高功率质子加速器

文章介绍了与散裂中子源相关的高功率（几十千瓦到几兆瓦）质子加速器的发展状况,比较了不同类型的加速器组合的优缺点和它们的应用范围,并着重介绍该类型加速器所研究的主要加速器物理和加速器技术问题,其中很多都是当今国际粒子加速器领域的前沿问题.文中还简单地介绍了中国散裂中子源（CSNS）计划的加速器概念设计方案.     

漂移管直线加速器高功率波导窗的物理设计

为了研发中国散裂中子源(CSNS)漂移管直线加速器(DTL)的功率耦合器,在对常规波导窗结构进行改进的基础上,设计了一种新型高功率波导窗。利用微波仿真软件CST优化了波导窗的高频传输特性,并采用ANSYS分析了波导窗在通功率时的温升及热应力以防止陶瓷片破裂,结果表明,波导窗能传输的最大平均功率达到了800 kW。校核了波导窗抽真空时的机械强度,并对陶瓷窗高频打火进行初步讨论,结果表明,漂移管直线加速器入腔功率为2 MW,小于波导窗的临界输入功率2.355 MW,窗内打火的机率很小。     

基于深度图像的嵌入式人体坐姿检测系统的实现

以检测不良坐姿,分析人们学习工作状态为引导,设计了基于深度图像的坐姿检测系统。该系统采用3D传感器获取人体坐立时的深度图像,设计了一种基于深度阈值的快速前景提取与干扰移除方法,能快速有效的提取坐姿状态下的人体分割图。基于人体轮廓的曲线特征实现了人体关键点定位,通过人体关键点的角度、深度信息与轮廓特征,对不同的坐姿图像进行统计分析,得到了一种区分不同坐姿的判定基准,运用该基准对9种不同坐姿进行识别,平均识别率可达到90%。最后,基于Android平台设计了坐姿检测系统的应用软件,实现了坐姿检测、坐姿提醒以及姿态统计等功能,并且对学习过程进行测试,测试结果表明,本系统可以有效的检测出9种坐姿、并对不良坐姿进行提醒与统计。     

C-ADS注入器Ⅰ联锁保护系统设计

联锁保护系统是加速器驱动次临界系统（ADS）先导专项（C-ADS）核心系统之一，用于对加速器控制及人身和设备保护。为此设计搭建了基于可编程逻辑控制器（PLC）和PROFINET协议的联锁控制系统，对加速器各个关键部件的信号进行采集和控制。为满足加速器对可靠性的严格要求，该联锁系统选用最新型的PLC和I/O模块，并采用高可靠性容错和冗余技术的硬件设计。本文还对该联锁系统的冗余状态和非冗余状态做了可靠性分析对比。基于该系统的实验物理和工业控制系统（EPICS）的控制接口也已成功开发，并在线应用。     

中国散裂中子源直线射频功率源系统的研制

中国散裂中子源加速器质子束流加速能量为1.6 GeV,重复频率为25 Hz,撞击固体金属靶产生散射中子,一期工程的打靶束流功率为100 kW。直线加速器的设计束流流强为15 mA,输出能量为81 MeV。射频加速和聚束系统包括一台射频四极场加速器、中能束流传输线的两个聚束器、四节漂移管直线加速器加速腔和直线-环束流传输线的一个散束器,与之相对应,共有8个单元在线运行的射频功率源为其提供所需的射频功率。目前,直线射频功率源系统预研项目已全部完成,各项性能参数均已达到设计指标,当前正处在批产安装调试阶段。151013     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The accelerator of CSNS consists of a low energy linac, a Rapid Cycling Synchrotron (RCS) and two beam transport lines. The overall physics design of CSNS accelerator is described, including the design principle, the choice of the main parameters and design of each part of accelerators. The key problems of the physics design, such as beam loss and control, are also discussed. The interface between the different parts of accelerator, as well as between accelerator and target, are introduced.     

Emittance coupling driven by space charge in the CSNS linac

In the conventional design of RF linacs, the bunched beams are not in thermal equilibrium. The space charge forces couple the particle motions between the transverse and the longitudinal directions. Fur-thermore it will cause the equipartitioning process which leads to emittance growth and halo formation. In the design of the China Spallation Neutron Source (CSNS) linac, three cases are investigated using the Hofmann stability charts. In this paper, we present the equipartitioning beam study of the CSNS Alvarez DTL linac.     

Vibration research of the AC dipole-girder system for CSNS/RCS

The China Spallation Neutron Source (CSNS) is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts: an H^- linac and a rapid cycling synchrotron (RCS). The RCS accumulates the 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The dipole magnet of CSNS/RCS is an active vibration equipment, which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole-girder system. This paper takes the AC dipole and girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The ANSYS simulation method plays a very important role in the girder structure design stage. With this method, the mechanical resonance phenomenon was avoided in the girder design time. At the same time the dipole vibratory force will influence the other equipment through the girder. Since it is necessary to isolate and decrease the dipole vibration, a new isolator was designed to isolate the vibratory force and decrease the vibration amplitude of the magnet.     

中国散裂中子源直线输运线束流位置测量系统

介绍了针对中国散裂中子源(CSNS)的直线到环输运线(LRBT)所设计的条带式束流位置测量(BPM)系统,探头方案以条带式电极为基础进行物理设计及参数优化,并通过机械标定减少机械加工误差,电子学选用商用数据处理方案。此系统在加速器实际运行中有效提供位置信息,对在线测量数据采用奇异值分解(SVD)进行分析,根据分析结果,对束流轨道测量的精度达到预期设计目的,满足物理调束需求。     

DTL cavity design and beam dynamics for a TAC linear proton accelerator

A 30 mA drift tube linac (DTL) accelerator has been designed using SUPERFISH code in the energy range of 3-55 MeV in the framework of the Turkish Accelerator Center (TAC) project. Optimization criteria in cavity design are effective shunt impedance (ZTT), transit-time factor and electrical breakdown limit. In geometrical optimization we have aimed to increase the energy gain in each RF gap of the DTL cells by maximizing the effective shunt impedance (ZTT) and the transit-time factor. Beam dynamics studies of the DTL accelerator have been performed using beam dynamics simulation codes of PATH and PARMILA. The results of both codes have been compared. In the beam dynamical studies, the rms values of beam emittance have been taken into account and a low emittance growth in both x and y directions has been attempted.     

Preliminary design studies of a 100 MeV H−/H+ LINAC as injector for SNS synchrotron/ADS LINAC

It is proposed to construct a spallation neutron source (SNS) at Centre for Advanced Technology (CAT) based on a 1 GeV proton synchrotron with 100 MeV H⁻ LINAC as injector. Additionally, the LINAC can form the first 100 MeV part of a 1 GeV proton LINAC to be built in future for accelerator driven system (ADS) applications. We are exploring a configuration of the 100 MeV LINAC which will consist of an H⁻ ion source, a 4–6 MeV RFQ followed either by a 20 MeV drift tube LINAC (DTL) and 100 MeV separated function drift tube LINAC (SDTL) or a coupled cavity drift tube LINAC (CCDTL) structure. In this paper, we present the results of our preliminary physics design studies of the RFQ-SDTL, RFQ-CCDTL and RFQ-DTL-SDTL configurations. The design of the 4.5 MeV RFQ is discussed along with the matching sections between the RFQ-SDTL/DTL and RFQ-CCDTL. The choice of the accelerator configuration and that of various parameters of the individual accelerator structures under consideration are discussed. The design objectives are to arrive at a configuration which eases heat removal for CW operation and which is less prone to halo formation in order to reduce the beam loss at higher energies.     

基于实时样本采集的个性化手写汉字输入系统设计

手写汉字识别是手写汉字输入的基础。目前智能设备中的手写汉字输入法无法根据用户的汉字书写习惯,动态调整识别模型以提升手写汉字的正确识别率。通过对最新深度学习算法及训练模型的研究,提出了一种基于用户手写汉字样本实时采集的个性化手写汉字输入系统的设计方法。该方法将采集用户的手写汉字作为增量样本,通过对服务器端训练生成的手写汉字识别模型的再次训练,使识别模型能够更好地适应该用户的书写习惯,提升手写汉字输入系统的识别率。最后,在该理论方法的基础上,结合新设计的深度残差网络,进行了手写汉字识别的对比实验。实验结果显示,通过引入实时采集样本的再次训练,手写汉字识别模型的识别率有较大幅度的提升,能够更有效的满足用户在智能设备端对手写汉字输入系统的使用需求。