中国散裂中子源旋转线圈测量系统研制

中国散裂中子源(CSNS)加速器主要由一台直线加速器、一台快循环加速器以及低能、高能输运线组成。针对CSNS加速器部分直流磁铁研制了一套旋转线圈测量系统。对系统的研制方案、功能、精度、完成的磁铁类型以及部分测量结果进行介绍。该系统解决了CSNS批量磁铁之间的不同中心高度、质量、有效长度、磁场强度的兼容性难题。经过测试运行，积分场测量重复性误差好于±0.02%，空间谐波重复性误差好于0.005%，磁中心测量重复性误差好于±0.03 mm，顺利完成了中国散裂中子源工程150台多种类型磁铁的检测任务。     

CSNS/RCS交流二极磁铁研制关键技术

针对交流二极磁铁的磁场特性和涡流问题,利用电磁场分析软件对磁铁进行了优化设计和温度场计算,确定了交流二极磁铁关键技术的方案。对交流二极磁铁极头端面采用了罗高斯基曲线和谐波削斜的方法来提高磁铁磁场质量；对铁芯端部和端板进行开槽优化设计,有效切断磁铁端部主要的涡流回路,降低了磁铁温升；磁铁线圈采用铝绞线导线进行绕制,以减少磁铁线圈内的涡流损耗。最后,通过对样机磁铁的测试,磁场均满足物理要求,磁铁温度也控制在安全范围内。     

中国散裂中子源磁铁系统和样机研制

中国散裂中子源(China Spallation Neutron Source, CSNS)快循环同步加速器(Rapid Cycling Synchrotron, RCS)磁铁由24块二极磁铁、48块四极磁铁、16块六极磁铁和若干斜四极磁铁以及校正磁铁组成, 其中二极磁铁和四极磁铁是带直流偏置的25Hz正弦交流励磁, 铁芯和线圈导体将产生不可忽视的涡流效应. 为了积累批量生产磁铁的制造经验, 探索磁铁后期处理和磁场测量方法, 已完成了中空水冷铝绞线试样线圈的研制, 启动了二极磁铁和四极磁铁样机的研制. 本文将对相关进展进行介绍.     

ATPF—a dedicated proton therapy facility

A proton therapy facility based on a linac injector and a slow-cycling synchrotron is proposed. To obtain good treatments for different cancer types, both the spot scanning method and the double-scattering method are adopted in the facility, whereas the nozzles include both gantry and fixed beam types. The proton accelerator chain includes a synchrotron of 250 MeV in maximum energy, an injector of 7 MeV consisting of an RFQ and a DTL linac, with a repetition rate of 0.5 Hz. The slow extraction using the third-order resonance and together with the RFKO method is considered to be a good method to obtain a stable and more-or-less homogenous beam spill. To benefit the spot scanning 200 between 60 MeV and 230 MeV. A new method method, the extraction energy can be as many as about - the emittance balancing technique of using a solenoid or a quadrupole rotator is proposed to solve the problem of unequal emittance in the two transverse planes with a beam slowly extracted from a synchrotron. The facility has been designed to keep the potential to be upgraded to include the carbon therapy in the future.     

中国散裂中子源磁铁系统和样机研制

中国散裂中子源(china spallation Neutron source,CSNS)快循环同步加速器(Rapid cyclingSync,arotron,RCS)磁铁由24块二极磁铁、48块四极磁铁、16块六极磁铁和若干斜四极磁铁以及校正磁铁组成,其中二极磁铁和四极磁铁是带直流偏置的25Hz正弦交流励磁,铁芯和线圈导体将产生不可忽视的涡流效应.为了积累批量生产磁铁的制造经验,探索磁铁后期处理和磁场测量方法,已完成了中空水冷铝绞线试样线圈的研制,启动了二极磁铁和四极磁铁样机的研制.本文将对相关进展进行介绍.     

Progress on the construction of the 100 MeV/100 kW electron linac for the NSC KIPT neutron source

IHEP, China is constructing a 100 MeV/100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerator was pre-installed as a testing facility in the experimental hall #2 of IHEP. The injector beam and key hardware testing results met the design goal. Recently, the injector testing facility was disassembled and all of the components for the whole accelerator have been shipped to Ukraine from China by the ocean shipping. The installation of the whole machine in KIPT will be started in June, 2013. The construction progress, the design and testing results of the injector beam and key hardware are presented.     

Transient electromagnetic simulation and thermal analysis of the DC-biased AC quadrupole magnet for CSNS/RCS

Due to the large eddy currents at the ends of the quadrupole magnets for CSNS/RCS, the magnetic field properties and the heat generation are of great concern. In this paper, we take transient electromagnetic simulation and make use of the eddy current loss from the transient electromagnetic results to perform thermal analysis. Through analysis of the simulated results, the magnetic field dynamic properties of these magnets and a temperature rise are achieved. Finally, the accuracy of the thermal analysis is confirmed by a test of the prototype quadrupole magnet of the RCS.