Medical application of diffraction enhanced imaging in mouse liver blood vessels

Neovascularization is correlative with many processes of diseases, especially for tumor growth, invasion, and metastasis. What is more, these tumor microvessels are totally different from normal vessels in morphology. Therefore, observation of the morphologic distribution of microvessels is one of the key points for many researchers in the field. Using diffraction enhanced imaging （DEI）, we observed the mirocvessles with diameter of about 40 μm in mouse liver. Moreover, the refraction image obtained from DEI shows higher image contrast and exhibits potential use for medical applications.     

TiO_2/Ag composite nanowires for a recyclable surface enhanced Raman scattering substrate

Multifunctional TiO2/Ag composite nanowires are fabricated with a hydrothermal method by precipitating Ag nanoparticles （NPs） on the surfaces of TiO2 nanowires. This hierarchical one-dimensional （1D） nanostructure can be used as a surface enhanced Raman scattering （SERS） substrate with high sensitivity, for detecting the rhodamine 6G （R6G） in a wide range of low concentrations （from 1 × 10 6 M to 1 × 10-12 M）. In addition, the substrate can be self-cleaned under the irradiation of ultraviolet （UV） light due to the superior photocatalytic capacity of the TiO2/Ag composite nanostructure, making the recycled use of SERS substrates closer to reality. With both the evident SERS performance and high efficiency of photocatalytic capacity, such TiOz/Ag composite nanowires demonstrate considerable potential in the chemical sensing of organic pollutants.     

Polynomial curve fitting method for refraction-angle extraction in diffraction enhanced imaging

X-ray diffraction sorbing low-Z sample. How enhanced imaging （DEI） is applied to extract phase information from to inspect internal structures of weakly abraw images measured in different positions of rocking curve is the key problem of DEI. In this paper, we present an effective extraction method called polynomial curve fitting method, in order to extract accurate information angular in a fast speed. It is compared with the existing methods such as multiple-images statistical method and Gaussian curve fitting method. The experiments results on a plastic cylinder and a black ant at the Beijing Synchrotron Radiation Facility prove that the polynomial curve fitting method can obtain most approximate refraction-angle values and its computation speed is 10 times faster than the Gaussian curve fitting method.     

The design and numerical analysis of tandem thermophotovoltaic cells

In this paper, numerical analysis of GaSb （Eg = 0.72 eV）/Gao.84Ino.16Aso.14Sbo.86 （Eg = 0.53 eV） tandem thermopho- tovoltaic （TPV） cells is carried out by using Silvaco/Atlas software. In the tandem cells, a GaSb p-n homojunction is used for the top cell and a GalnAsSb p-n homojunction for the bottom cell. A heavily doped GaSb tunnel junction connects the two sub-cells together. The simulations are carried out at a radiator temperature of 2000 K and a cell temperature of 300 K. The radiation photons are injected from the top of the tandem cells. Key properties of the single- and dual-junction TPV cells, including I-V characteristic, maximum output power （Pmax）, open-circuit voltage （Voc）, short-circuit current （/~sc）, etc. are presented. The effects of the sub-cell thickness and carrier concentration on the key properties of tandem cells are investigated. A comparison of the dual-TPV cells with GaSb and GalnAsSb single junction cells shows that the Pmax of tandem cells is almost twice as great as that of the single-junction cells.     

An ART iterative reconstruction algorithm for computed tomography of diffraction enhanced imaging

X-ray diffraction enhanced imaging （DEI） has extremely high sensitivity for weakly absorbing low- Z samples in medical and biological fields. In this paper, we propose an Algebra Reconstruction Technique （ART） iterative reconstruction algorithm for computed tomography of diffraction enhanced imaging （DEI-CT）. An Ordered Subsets （OS） technique is used to accelerate the ART reconstruction. Few-view reconstruction is also studied, and a partial differential equation （PDE） type filter which has the ability of edge-preserving and denoising is used to improve the image quality and eliminate the artifacts. The proposed algorithm is validated with both the numerical simulations and the experiment at the Beijing synchrotron radiation facility （BSRF）.     

Li–N dual-doped ZnO thin films prepared by an ion beam enhanced deposition method

Li–N dual-doped ZnO films [ZnO:(Li,N)] with Li doping concentrations of 3 at.%–5 at.% were grown on a glass substrate using an ion beam enhanced deposition(IBED) method. An optimal p-type ZnO:(Li,N) film with the resistivity of 11.4 Ω·cm was obtained by doping 4 at.% of Li and 5 sccm flow ratio of N2. The ZnO:(Li,N) films exhibited a wurtzite structure and good transmittance in the visible region. The p-type conductive mechanism of ZnO:(Li,N) films are attributed to the Li substitute Zn site(LiZn) acceptor. N doping in ZnO can forms the Lii–NOcomplex, which depresses the compensation of Li occupy interstitial site(Lii) donors for LiZnacceptor and helps to achieve p-type ZnO:(Li,N) films. Room temperature photoluminescence measurements indicate that the UV peak(381 nm) is due to the shallow acceptors LiZnin the p-type ZnO:(Li,N) films. The band gap of the ZnO:(Li,N) films has a red-shift after p-type doping.     

Electrically tunable resonant terahertz transmission in subwavelength hole arrays

An actively enhanced resonant transmission in a plasmonic array of subwavelength holes is demonstrated by use of terahertz time-domain spectroscopy. By connecting this two-dimensional element into an electrical circuit, tunable resonance enhancement is observed in arrays made from good and relatively poor metals. The tunable feature is attributed to the nonlinear electric response of the periodic hole array film, which is confirmed by its voltage–current behavior. This finding could lead to a unique route to active plasmonic devices, such as tunable filters, spatial modulators, and integrated terahertz optoelectronic components.     

Improved measurement of the form factors in the decay lambda+c-->lambda + nue

Using the CLEO detector at the Cornell Electron Storage Ring, we have studied the distribution of kinematic variables in the decay lambda(+)(c)lambda--> e(+)nu(e). By performing a four-dimensional maximum likelihood fit, we determine the form factor ratio, R= f(2)/f(1) = -0.31 +/- 0.05(stat) +/- 0.04(syst), the pole mass, M(pole) = [2.21 +/- 0.08(stat) +/- 0.14(syst)] GeV/c(2), and the decay asymmetry parameter of the lambda(+)(c), alpha (lambda(c)) = -0.86 +/-0.03(stat) +/- 0.02(syst), for q(2) = 0.67 (GeV/c(2))(2). We compare the angular distributions of the lambda(+)(c) and lambda(-)(c) and find no evidence for CP violation: A(lambda(c)) = (alpha(lambda(c)) + alpha (lambda(c)))/(alpha(lambda(c))-alpha(lambda(c))) = 0.00 +/- 0.03(stat) +/- 0.01(syst) +/- 0.02, where the third error is from the uncertainty in the world average of the CP-violating parameter, A(lambda), for ppi(-).     

Top-quark mass measurement from dilepton events at CDF II

We report a measurement of the top-quark mass using events collected by the CDF II detector from pp collisions at square root of s = 1.96 TeV at the Fermilab Tevatron. We calculate a likelihood function for the top-quark mass in events that are consistent with tt --> bl(-)nu(l)bl'+ nu'(l) decays. The likelihood is formed as the convolution of the leading-order matrix element and detector resolution functions. The joint likelihood is the product of likelihoods for each of 33 events collected in 340 pb(-1) of integrated luminosity, yielding a top-quark mass M(t) = 165.2 +/- 6.1(stat) +/- 3.4(syst) GeV/c2. This first application of a matrix-element technique to tt --> bl+ nu(l)bl'- nu(l') decays gives the most precise single measurement of M(t) in dilepton events. Combined with other CDF run II measurements using dilepton events, we measure M(t) = 167.9 +/- 5.2(stat) +/- 3.7(syst) GeV/c2.     

Measurement of the mass difference between t and t quarks

We present a direct measurement of the mass difference between t and t quarks using tt candidate events in the lepton+jets channel, collected with the CDF II detector at Fermilab's 1.96 TeV Tevatron pp Collider. We make an event by event estimate of the mass difference to construct templates for top quark pair signal events and background events. The resulting mass difference distribution of data is compared to templates of signals and background using a maximum likelihood fit. From a sample corresponding to an integrated luminosity of 5.6 fb(-1), we measure a mass difference, ΔM(top) = M(t) - M(t) = -3.3 ± 1.4(stat) ± 1.0(syst) GeV/c2, approximately 2 standard deviations away from the CPT hypothesis of zero mass difference.     

Measurements of the branching fraction and CP-violation asymmetries in B0-->f0(980)K0S

We present measurements of the branching fraction and CP-violating asymmetries in the decay B0-->f0(980)K0S. The results are obtained from a data sample of 123 x 10(6) Upsilon(4S)-->BB decays. From a time-dependent maximum likelihood fit, we measure the branching fraction B(B0-->f0(980)(-->pi+pi-)K0)=(6.0+/-0.9+/-0.6+/-1.2)x10(-6), the mixing-induced CP violation parameter S=-1.62(+0.56)(-0.51)+/-0.09+/-0.04, and the direct CP violation parameter C=0.27+/-0.36+/-0.10+/-0.07, where the first errors are statistical, the second systematic, and the third due to model uncertainties. We measure the f0(980) mass and width to be mf0(980)=(980.6+/-4.1+/-0.5+/-4.0) MeV/c2 and Gammaf0(980)=(43(+12)(-9)+/-3+/-9) MeV/c2, respectively.     

RE(POA)3phen配合物的合成、表征及荧光性能

合成了以稀土离子Sm³⁺、Eu³⁺、Tb³⁺、Dy³⁺及Tb³⁺为发光中心,以苯氧乙酸(HPOA)和邻菲罗啉(phen)为配体,掺杂La³⁺、Gd³⁺、 Y³⁺的7种稀土配合物, 对配合物进行了C、H、N元素分析、稀土络合滴定、红外光谱、紫外光谱和发光光谱的研究。结果表明配合物的组成分别为SmL₃L'·1/2H₂O,EuL₃L'·1/2H₂O,TbL₃L'· 1/2H₂O,DyL₃L'·1/2H₂O,掺杂配合物组成分别为Tb_0.5Gd_0.5L₃L'·1/2H₂O,Tb_0.5Y_0.5L₃L'·1/2H₂O,Tb_0.5La_0.5L₃L'·1/2H₂O(L=C₆H₅OCH₂COO^-, L'=phen)。配合物中的稀土离子与苯氧乙酸中羧基的一个氧原子和苯氧基的氧原子配位,与邻菲罗啉中的两个氮原子配位成键;荧光光谱表明,铽三元配合物的发射强度要远大于其它三元配合物的发光强度,掺杂发光惰性稀土离子La³⁺、Gd³⁺、Y³⁺的铽配合物中,Y³⁺掺杂配合物的发光强度有所增强。     

Measurement of the top-quark mass in all-hadronic decays in pp collisions at CDF II

We present a measurement of the top-quark mass Mtop in the all-hadronic decay channel tt-->W+bW-b-->q1q2bq3q4b. The analysis is performed using 310 pb-1 of sqrt[s]=1.96 TeV pp[over ] collisions collected with the CDF II detector using a multijet trigger. The mass measurement is based on an event-by-event likelihood which depends on both the sample purity and the value of the top-quark mass, using 90 possible jet-to-parton assignments in the six-jet final state. The joint likelihood of 290 selected events yields a value of Mtop=177.1+/-4.9(stat)+/-4.7(syst) GeV/c2.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.