共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs. 相似文献
3.
4.
研究了La2O3对Yb:Y2O3透明陶瓷光谱性能的影响,添加适量La2O3以后,Yb:Y2O3透明陶瓷的吸收峰和发射峰的位置不变,但由于La3+的离子半径大于Y3+的离子半径,在Y2O3中引入La3+离子后,导致Y2O3晶格常数变大,晶场强度变弱,同时降低了Y2O3晶体的有序度,致使发射峰强度有所下降,发射截面变小.过量的La2O3(x=0.16)造成Yb3+激活离子发射强度明显下降;其荧光寿命在添加La2O3后总体增大45%—60%.
关键词:
氧化镧
氧化钇
透明陶瓷
光谱性能 相似文献
5.
The characteristics of a BaO–Al2O3–B2O3–SiO2–La2O3 glass ceramic prepared by spray pyrolysis were studied. Glass powders with spherical shape and amorphous phase were prepared
by complete melting at a preparation temperature of 1 500°C. The mean size and geometric standard deviation of the powders
prepared at the temperature of 1 500°C were 0.6 μm and 1.3. The glass powders had similar composition to that of the spray
solution. The glass transition temperature (T
g) of the glass powders was 600.3°C. Two crystallization exothermic peaks were observed at 769.3 and 837.8°C. Densification
of the specimen started at a sintering temperature of 600°C, in which Ba4La6O(SiO4)6 as main crystal structure was observed. Complete densification of the specimen occurred at a sintering temperature of 800°C.
The specimens sintered at temperatures above 800°C had main crystal structure of BaAl2Si2O8. 相似文献
6.
随着能源危机的加剧,太阳能电池作为开发和利用太阳能的一种普遍形式, 日益受到世界各国的重视.随着太阳能电池向着高效率、薄膜化、无毒性和原材料丰富的方向发展, 单纯的硅系太阳能电池已经无法达到这样的要求,因此新的材料和工艺的开发利用迫在眉睫. 本文研究了碳材料在硅异质节上实现光伏效应的改善及其可能在太阳能电池上的应用. 采用脉冲激光沉积方法制备的Co2-C98/Al2O3/Si异质结构在标准日光照射 (AM1.5, 100 mW/cm2)条件下,可获得0.447 V的开路电压和18.75 mA/cm2的电流密度, 转换效率可达3.27%.通过电容电压特性和暗条件下的电输运性能测量, 证明了氧化铝层的引入不但对单晶硅的表面起到了物理钝化作用,减小了反向漏电流, 使异质结界面缺陷、界面能级和复合中心减少,还起到了场效应钝化作用, 增加了异质结界面的势垒高度,增加了开路电压,使异质结的光伏效应显著增强. 相似文献
7.
制备了Tm3+(8.0mol%)掺杂(77-x)GeO2-xGa2O3-8Li2O-10BaO-5La2O3(x=4,8,12,16)系列玻璃.系统地研究了Ga2O3从4mol%变化到16mol%时,玻璃的光谱性质与热学性质的变化规律.差热分析表明,随着Ga2O3含量的增加,锗酸盐玻璃的热稳定性增加.运用Judd-Ofelt(J_O)理论计算得到了Tm3+在不同Ga2O3含量的GeO2-Ga2O3-Li2O-BaO-La2O3玻璃中的J-O强度参数(Ω2,Ω4,Ω6)及Tm3+各激发能级的自发跃迁概率、荧光分支比以及辐射寿命等光谱参量.在808nm激光二极管的激发下,测试并分析了Ga2O3对Tm3+荧光光谱特性的影响.随着Ga2O3从4mol%增加到16mol%,Tm3+在1.8μm处的荧光强度呈现先减弱后增强的特性.当Ga2O3含量大约在12mol%时,Tm3+在1.8μm处的荧光强度最弱,受激发射截面达到最小.还初步讨论了Ga2O3对玻璃结构与光谱参数的影响规律.
关键词:
3+掺杂锗酸盐玻璃')" href="#">Tm3+掺杂锗酸盐玻璃
光谱性能
Judd-Ofelt参数
热稳定性 相似文献
8.
9.
用高温熔融法制备了Nd3+(物质的量分数2%)掺杂40B2O3-(15-χ)Nb2O5-45BaO-χLa2O3玻璃,测量了样品的吸收光谱、发射光谱和差热分析(DTA)曲线。根据Nd3+光学跃起矩阵的特点,应用Judd-Ofelt理论,从吸收光谱获得了Nd3+光学跃起的强度参数。并计算了Nd3+离子的自发辐射跃迁几率、总自发辐射几率、荧光分支比、辐射能级寿命和受激发射截面。结果表明:该体系玻璃中,随着Nb2O5 含量的增加和La2O32增大,说明材料的对称性降低;而Ω6减小,说明Nd-O键的共价性和键强增强;受激发射截面减小。DTA实验表明,随着Nb2O5含量的增加,材料的热稳定性提高。 相似文献
10.
11.
12.
用浸渍法制备了一系列不同Mo含量的MoO3/Al2O3催化剂.测量了这些样品的正电子湮没寿命谱(PALS)与符合多普勒展宽(CDB)谱,以研究其孔洞结构以及Mo分散.正电子寿命测量结果表明,Al2O3载体中存在两种不同尺寸的孔洞.掺入MoO3之后,Mo原子主要进入Al2O3的大孔中,使孔洞体积减小.符合多普勒展宽谱结果表明,当MoO
关键词:
3/Al2O3催化剂')" href="#">MoO3/Al2O3催化剂
正电子湮没寿命谱
符合多普勒展宽
Mo 分散 相似文献
13.
14.
包钴型γ-Fe2O3磁粉的矫顽力可比原γ-Fe2O3磁粉提高8000—32000A/m。木文研究探讨了两种包钴型γ-Fe2O3磁粉(包钴γ-Fe2O3和包钴包亚铁γ-Fe2O3)的单轴各向异性的起源和矫顽力增大的机制。包钴γ-Fe2O3磁粉矫顽力
关键词: 相似文献
15.
16.
17.
Gurinder Pal Singh Parvinder KaurSimranpreet Kaur D.P. Singh 《Physica B: Condensed Matter》2012,407(21):4168-4172
xCeO2–30Bi2O3–(70−x) B2O3 glasses are synthesized by using the melt quench technique. A number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.15 to 1.61 eV, refractive index increases from 2.67 to 2.93 and density increases from 4.151 to 4.633 g/cm3. The decrease in band gap with CeO2 doping approaches the semiconductor behavior. FTIR spectroscopy reveals that incorporation of CeO2 into glass network helps to convert the structural units of [BO3] into [BO4] and results in Bi–O bond vibration of [BiO6]. 相似文献
18.
19.
20.
The influence of hydrothermal modification of γ-Al2O3 on the properties of NiMo/γ-Al2O3 catalyst was investigated in this paper. The experimental results showed that the use of the modified γ-Al2O3 in the preparation of the NiMo/γ-Al2O3 catalyst led to the increase of the dispersion of the surface Mo and Ni oxides, favored the formation of the poly-molybdates and promoted the reduction of the active Mo oxides owing to the increase of the surface acidity of the modified γ-Al2O3. Therefore, the NiMo/γ-Al2O3 catalyst supported on the modified γ-Al2O3 exhibited a higher hydrodenitrogenation (HDN) activity than that supported on the untreated γ-Al2O3 in the temperature range of 300-340 °C. 相似文献