Synthesis and properties of Au-Fe3O4 and Ag-FeaO4 heterodimeric nanoparticles

Monodisperse Au-Fe3O4 heterodimeric nanoparticles （NPs） were prepared by injecting precursors into a hot reaction solution. The size of Au and Fe3O4 particles can be controlled by changing the injection temperature. UVis spectra show that the surface plasma resonance band of Au-Fe3O4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size. The as-prepared heterodimeric Au-Fe3O4 NPs exhibited superparamagnetic properties at room temperature. The Ag-Fe3O4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO3 as precursor instead of HAuCl4. It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Adjustable surface plasmon resonance with Au,Ag, and Ag@Au core-shell nanoparticles

We report an experimental study on the synthesis of metal nanoparticles （NPs） with adjustable optical density based on surface plasmon resonance （SPR）. Metal NPs prepared by laser ablation in liquid method and the effect of laser parameters on the size, distribution, wavelength of SPR of Ag, Au, and mixture of Ag-Au, and Ag core/Au shell NPs are investigated. Our results show that the adjustable SPR band can be achieved in each class of NPs which is suitable for adjustable optical window applications.     

活性炭负载Pt/Fe3O4催化剂及其选择性转移加氢肉桂醛的催化性能

A variety of spherical and structured activated charcoal supported Pt/Fe₃O₄ composites with an average particle size of ～100 nm have been synthesized by a self-assembly method using the difference of reduction potential between Pt (IV) and Fe (Ⅱ) precursors as driving force. The formed Fe₃O₄ nanoparticles (NPs) effectively prevent the aggregation of Pt nanocrystallites and promote the dispersion of Pt NPs on the surface of catalyst, which will be favorable for the exposure of Pt active sites for high-efficient adsorption and contact of substrate and hydrogen donor. The electron-enrichment state of Pt NPs donated by Fe₃O₄ nanocrystallites is corroborated by XPS measurement, which is responsible for promoting and activating the terminal C=O bond of adsorbed substrate via a vertical configuration. The experimental results show that the activated charcoal supported Pt/Fe₃O₄ catalyst exhibits 94.8% selectivity towards cinnamyl alcohol by the transfer hydrogenation of cinnamaldehyde with Pt loading of 2.46% under the optimum conditions of 120℃ for 6 h, and 2-propanol as a hydrogen donor. Additionally, the present study demonstrates that a high-efficient and recyclable catalyst can be rapidly separated from the mixture due to its natural magnetism upon the application of magnetic field.     

Preparation and optical spectroscopy of phosphate glasses containing divalent europium ions

P2O5.BaO.Na2O.K2O glasses doped with various content of Eu2O3 were prepared using high temperature melting method, and the Eu2+ ions in the phosphate glasses were obtained with the aid of the reductive action of silicon powder. The fabricating conditions, fluorescence, excitation spectra of the glasses were then studied. The glasses containing europium show a broad emission band at 450 nm and sharp bands from 580 to 650 nm, and the co-existence of Eu2+ and Eu3+ is identified. Also, a good glass with a dominant proportion and large quantity of Eu2+ ions can be obtained by the reductive action of silicon powder and proper processing.     

Microstructure,optical,and photoluminescence properties ofβ-Ga2O3films prepared by pulsed laser deposition under different oxygen partial pressures

Theβ-Ga₂O₃films are prepared on polished Al₂O₃(0001)substrates by pulsed laser deposition at different oxygen partial pressures.The influence of oxygen partial pressure on crystal structure,surface morphology,thickness,optical properties,and photoluminescence properties are studied by x-ray diffraction(XRD),atomic force microscope(AFM),scanning electron microscope(SEM),spectrophotometer,and spectrofluorometer.The results of x-ray diffraction and atomic force microscope indicate that with the decrease of oxygen pressure,the full width at half maximum(FWHM)and grain size increase.With the increase of oxygen pressure,the thickness of the films first increases and then decreases.The room-temperature UV-visible(UV-Vis)absorption spectra show that the bandgap of theβ-Ga₂O₃film increases from4.76 e V to 4.91 e V as oxygen pressure decreasing.Room temperature photoluminescence spectra reveal that the emission band can be divided into four Gaussian bands centered at about 310 nm(~4.0 e V),360 nm(~3.44 e V),445 nm(~2.79 e V),and 467 nm(~2.66 e V),respectively.In addition,the total photoluminescence intensity decreases with oxygen pressure increasing,and it is found that the two UV bands are related to self-trapped holes(STHs)at O1 sites and between two O2-s sites,respectively,and the two blue bands originate from V_Ga^2-at Ga1 tetrahedral sites.The photoluminescence mechanism of the films is also discussed.These results will lay a foundation for investigating the Ga₂O₃film-based electronic devices.     

Synthesis and magnetic properties of CdS/α-Fe_2O_3 hierarchical nanostructures

CdS/α-Fe2O3 hierarchical nanostructures, where the CdS nanorods grow irregularly on the side surface of α-Fe2O3 nanorods, were synthesized via a three-step process. The diameters and lengths of CdS nanorods can be tuned by changing the ethylenediamine (EDA) and Cd ion concentrations. The magnetic investigations by superconducting quantum interference device indicate that the hierarchical nanostructures have an Morin transition at lower temperature (230 K) than that of the single bulk α-Fe2O3 materials (263 ...     

Growth and transport features of electron-doped superconductor Pr1-xLaCexCuO4-δ thin films

<正>T’-phase electron-doped superconductor Pr_1-xLaCe_xCuO_4-δ（PLCCO） thin films are successfully prepared on SrTiO₃（100） substrates by using the dc magnetron sputtering method.It is found that the films each have a highly oriented structure along the c-axis.For optimally doped films with x≈0.10,the superconducting transition temperature T_c is 23.5 K,which is similar to that of a single crystal.The quadratic temperature dependence of the resistivity is observed when T > T_c,which can be attributed to the two-dimensional Fermi liquid behaviour.Besides,the optimal conditions for preparing the T’-phase PLCCO thin films are also discussed in detail.     

Au Films Composed of Nanoparticles Fabricated on Liquid Surfaces for SERS

A series of Au films with different nominal deposition thickness d were fabricated on ionic liquid surfaces by thermal evaporation at room temperature,taken as surface-enhanced Raman scattering(SERS) substrates.Au atoms deposited on the liquid surfaces can diffuse and aggregate randomly and eventually form films with ramified structure,which consist of nanoparticles(NPs).There are amounts of ultrasmall(～1 nm or smaller) nanogaps among the Au NPs,which can dramatically enhance Raman signal.Raman spectra of R6G were investigated with the assistance of the Au films.The results indicate that the Au films with higher thickness possess better SERS performance when 5.0 ≤d ≤30.0 nm.A random distribution model of Au NPs was used in the finite-difference time-domain method and the simulation results are in good agreement with the experimental findings.     

Enhancing visible-light photocatalytic activity of α-Bi2O3 via non-metal N and S doping

In recent years, some important research indicated that the visible-light activity of photocatalysts could be enhanced via incorporating p-block non-metal elements into the lattice. In this paper, we investigated the electronic structures of pure and different non-metal （C, N, S, F, Cl, and Br） doped α-Bi2O3 using first-principles calculations based on the density functional theory. The band structures, the electronic densities of states, and the effective masses of electrons and holes for doped α-Bi2O3 were obtained and analyzed. The N and S dopings narrowed the band gap and reduced the effective mass of the carriers, which are beneficial for the photocatalytic performance. The theoretical predication was further confirmed by the experimental results.     

Morphology and photoluminescence of BaAl12O19:Mn2+ green phosphor prepared by flux method

This paper reports that the green phosphor BaAl11.9O19:0.1Mn2+ is prepared by a flux assisted solid state reaction method.The effect of flux systems on the crystal structure,morphology and luminescent properties of the phosphor are studied in detail.The samples are characterized by the application of x-ray diffraction patterns,scanning electron microscopy patterns,luminescent spectra and decay curves.The results show that a pure phase BaAl12O19 can be achieved at the firing temperature above 1300℃ by adding the proper flux system,the firing temperature is reduced at least 200℃ in comparison with the conventional solid state reaction method.Maximum photoluminescence emission intensity is observed at 517 nm for(AlF3+Li2CO3) flux system under vacuum ultraviolet region(147 nm) excitation.The photoluminescence emission intensity and the decay time of these phosphor is found to be more superior to that of the corresponding sample prepared by the conventional solid state reaction method implying the suitability of this route for the preparation of display device worthy phosphor materials.     

A facile synthesis of monodisperse CoFe2O4/SiO2 nanoparticles

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. By optimizing the preparation conditions, monodisperse CoFe₂O₄/SiO₂ NPs with high amino groups’ density were obtained, which is necessary for enzyme immobilization. TEM confirm that the sample is a core/shell structure. These aminated-CoFe₂O₄/SiO₂ NPs have narrow size distributions with a mean size of about 60 nm. Moreover, the aminated-CoFe₂O₄/SiO₂ NPs can be easily dispersed in aqueous medium. The experimental results also show that the NPs have superparamagnetism, indicating that the aminated-CoFe₂O₄/SiO₂ NPs can be used as an effective carrier for the enzyme immobilization.     

Field-induced microwave absorption in Fe3O4 nanoparticles and Fe3O4/polyaniline composites synthesized by different methods

Three kinds of nanoscale powders containing Fe₃O₄ nanoparticles (NPs) have been studied by ferromagnetic resonance (FMR): (i) Fe₃O₄ NPs grown and then covered with polyaniline (PANI), (ii) unclad Fe₃O₄ NPs, and (iii) Fe₃O₄ NPs grown “in situ” with the PANI. In every case, there is no low field microwave absorption, rather a single FMR line is observed. However, the half-power widths are of order of 1 kOe presumably due to a distribution of internal fields. For type I particles with a low concentration (below 40%) of Fe₃O₄, the observed resonance fields (H_r) are close to those expected for spheres with negligible magnetocrystalline anisotropy. For all other cases, H_r values are significantly lower. Such shortfalls can be roughly understood by invoking dipolar interactions between the grains, stresses frozen in grains during manufacture (method III), as well as anisotropy fields when the specimens are prepared in an aligning field.     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

Strongly interacting superspins in Fe3O4 nanoparticles

In this paper we report structural and magnetic properties of Fe₃O₄ nanoparticles synthesized by thermal decomposition of ball milled iron nitrate and citric acid in N₂ and air ambient. The XRD pattern of samples which are prepared in air shows some impurity phases, while the samples synthesized in the N₂ atmosphere are almost pure Fe₃O₄ phase. The result shows that by increasing the particle size, the magnetization of the samples increases. The increase of magnetization by increasing the particle size could be attributed to the lower surface spin canting and surface spin disorder of the larger magnetic nanoparticles. The results of ac magnetic susceptibility measurements show that the susceptibility data are not in accordance with the Néel -Brown model for superparamagnetic relaxation, but fit well with conventional critical slowing down model which indicates that the dipole-dipole interactions are strong enough to cause superspin-glass like phase in these samples.     

具有介孔结构的MnSiO3@Fe3O4@C纳米粒子的制备以及作为pH响应的T1-T2*双模MRI造影剂的研究应用

本文通过一个简单的、温和的方案制备了平均尺寸为120 nm,介孔结构的纳米粒子MnSiO₃@Fe₃O₄@C. 粒子的细胞毒性微小,可以用作T₁-T₂^*双模MRI造影剂. 酸性条件下MnSiO₃@Fe₃O₄@C释放出大量的Mn²⁺缩短T₁弛豫时间,提高成像分辨率. 超顺磁性的Fe₃O₄可以增强T₂对比成像,检测病变组织. 类似于肿瘤微环境/细胞器的酸性PBS(pH=5.0)中Mn²⁺的释放率达到31.66%,约为中性条件(pH=7.4)下的7倍. 释放的Mn²⁺通过内吞作用被细胞摄取,经肾脏排出,细胞毒性实验表明,MnSiO₃@Fe₃O₄@C具有低的细胞毒性,即使高浓度的200 ppm MnSiO₃@Fe₃O₄@C对HeLa细胞的毒性也相对较小. 对荷瘤小鼠静脉注射定量MnSiO₃@Fe₃O₄@C后,可以观察到一个快速增强的对比成像,给药24 h后,T₁MRI信号显著增强,达到132%,而T₂信号则明显降低至53.8%,活体MR成像证明了MnSiO₃@Fe₃O₄@C可以同时作为阳性和阴性造影剂. 此外,得益于介孔MnSiO₃优秀的酸敏感性,MnSiO₃@Fe₃O₄@C可以作为一种潜在的药物载体,实现肿瘤的诊疗一体化.     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

Fabrication, characterization and measurement of thermal conductivity of Fe3O4 nanofluids

Magnetite Fe₃O₄ nanoparticles were synthesized by a co-precipitation method at different pH values. The products were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electronic microscopy. Their magnetic properties were evaluated on a vibrating sample magnetometer. The results show that the shape of the particles is cubic and they are superparamagnetic at room temperature. Magnetic nanofluids were prepared by dispersing the Fe₃O₄ nanoparticles in water as a base fluid in the presence of tetramethyl ammonium hydroxide as a dispersant. The thermal conductivity of the nanofluids was measured as a function of volume fraction and temperature. The results show that the thermal conductivity ratio of the nanofluids increases with increase in temperature and volume fraction. The highest enhancement of thermal conductivity was 11.5% in the nanofluid of 3 vol% of nanoparticles at 40 °C. The experimental results were also compared with the theoretical models.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Si基Bi4Ti3O12铁电薄膜的制备与特性研究

采用sol-gel工艺, 在分层快速退火的工艺条件下成功地制备了高质量Si基Bi_{4Ti3O12铁电薄膜. 研究了Si基Bi4Ti3O12薄膜的生长行为、铁电性能、C-V特性和疲劳特性. 研究表明: Si基Bi4Ti3O12薄膜具有随退火温度升高沿c轴择优生长的趋势; 退火温度通过影响薄膜的晶粒尺寸、生长取向和薄膜中载流子的浓度来改变Si基Bi关键词： sol-gel法 铁电薄膜 4Ti3O12')" href="#">Bi4Ti3O12 C-V特性}     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.