Polarized photoluminescence spectroscopy in WS2, WSe2 atomic layers and heterostructures by cylindrical vector beams

Due to the large exciton binding energy, two-dimensional (2D) transition metal dichalcogenides (TMDCs) provide an ideal platform for studying excitonic states and related photonics and optoelectronics. Polarization states lead to distinct light-matter interactions which are of great importance for device applications. In this work, we study polarized photoluminescence spectra from intralayer exciton and indirect exciton in WS₂ and WSe₂ atomic layers, and interlayer exciton in WS₂/WSe₂ heterostructures by radially and azimuthally polarized cylindrical vector laser beams. We demonstrated the same in-plane and out-of-plane polarization behavior from the intralayer and indirect exciton. Moreover, with these two laser modes, we obtained interlayer exciton in WS₂/WSe₂ heterostructures with stronger out-of-plane polarization, due to the formation of vertical electric dipole moment.     

二硫化钨/石墨烯异质结的界面相互作用及其肖特基调控的理论研究

采用第一性原理方法研究了二硫化钨/石墨烯异质结的界面结合作用以及电子性质,结果表明在二硫化钨/石墨烯异质结中,其界面相互作用是微弱的范德瓦耳斯力.能带计算结果显示异质结中二硫化钨和石墨烯各自的电子性质得到了保留,同时,由于石墨烯的结合作用,二硫化钨呈现出n型半导体.通过改变界面的层间距可以调控二硫化钼/石墨烯异质结的肖特基势垒类型,层间距增大,肖特基将从p型转变为n型接触.三维电荷密度差分图表明,负电荷聚集在二硫化钨附近,正电荷聚集在石墨烯附近,从而在界面处形成内建电场.肖特基势垒变化与界面电荷流动密切相关,平面平均电荷密度差分图显示,随着层间距逐渐增大,界面电荷转移越来越弱,且空间电荷聚集区位置向石墨烯层方向靠近,导致费米能级向上平移,证实了肖特基势垒随着层间距的增加由p型接触向n型转变.本文的研究结果将为二维范德瓦耳斯场效应管的设计与制作提供指导.     

Excited state biexcitons in monolayer WSe2 driven by vertically grown graphene nanosheets with high-density electron trapping edges

Interface engineering in atomically thin transition metal dichalcogenides (TMDs) is becoming an important and powerful technique to alter their properties, enabling new optoelectronic applications and quantum devices. Interface engineering in a monolayer WSe₂ sample via introduction of high-density edges of standing structured graphene nanosheets (GNs) is realized. A strong photoluminescence (PL) emission peak from intravalley and intervalley trions at about 750 nm is observed at the room temperature, which indicated the heavily p-type doping of the monolayer WSe₂/thin graphene nanosheet-embedded carbon (TGNEC) film heterostructure. We also successfully triggered the emission of biexcitons (excited state biexciton) in a monolayer WSe₂, via the electron trapping centers of edge quantum wells of a TGNEC film. The PL emission of a monolayer WSe₂/GNEC film is quenched by capturing the photoexcited electrons to reduce the electron-hole recombination rate. This study can be an important benchmark for the extensive understanding of light–matter interaction in TMDs, and their dynamics.     

Improving the device performances of two-dimensional semiconducting transition metal dichalcogenides: Three strategies

Two-dimensional (2D) semiconductors are emerging as promising candidates for the next-generation nanoelectronics. As a type of unique channel materials, 2D semiconducting transition metal dichalcogenides (TMDCs), such as MoS₂ and WS₂, exhibit great potential for the state-of-the-art field-effect transistors owing to their atomically thin thicknesses, dangling-band free surfaces, and abundant band structures. Even so, the device performances of 2D semiconducting TMDCs are still failing to reach the theoretical values so far, which is attributed to the intrinsic defects, excessive doping, and daunting contacts between electrodes and channels. In this article, we review the up-to-date three strategies for improving the device performances of 2D semiconducting TMDCs: (i) the controllable synthesis of wafer-scale 2D semiconducting TMDCs single crystals to reduce the evolution of grain boundaries, (ii) the ingenious doping of 2D semiconducting TMDCs to modulate the band structures and suppress the impurity scatterings, and (iii) the optimization design of interfacial contacts between electrodes and channels to reduce the Schottky barrier heights and contact resistances. In the end, the challenges regarding the improvement of device performances of 2D semiconducting TMDCs are highlighted, and the further research directions are also proposed. We believe that this review is comprehensive and insightful for downscaling the electronic devices and extending the Moore’s law.     

掺杂对金属-MoS_2界面性质调制的第一性原理研究

采用基于密度泛函理论的第一性原理赝势平面波方法,计算了卤族元素掺杂对金属-MoS_2界面性质的影响,包括缺陷形成能、电子能带结构、差分电荷密度以及电荷布居分布.计算结果表明:卤族元素原子倾向于占据单层MoS_2表面的S原子位置;对于单层MoS_2而言,卤族元素的掺杂将在禁带中引入杂质能级以及导致费米能级位置的移动.对于金属-MoS_2界面体系,结合Schottky-Mott模型,证明了卤族元素的掺杂可以有效地调制金属-MoS_2界面间的肖特基势垒高度.发现F和Cl原子的掺杂将会降低体系的肖特基势垒高度.相比之下,Br和I原子的掺杂却增大了体系的肖特基势垒高度.通过差分电荷密度和布居分布的分析,阐明了肖特基势垒高度的被调制是因为电荷转移形成的界面偶极矩的作用导致.研究结果解释了相关实验现象,并给二维材料的器件化应用提供了调节手段.     

WS_2与WSe_2单层膜中的A激子及其自旋动力学特性研究

单层过渡金属硫化物由于其特有的激子效应以及强自旋-谷耦合性质,在光电子学及谷电子学等方面有着很广阔的应用前景.利用超快时间分辨光谱,本文系统地比较了两类钨基单层硫化物(WS_2和WSe_2)的A-激子动力学和谷自旋弛豫特性.实验结果表明, WS_2单层膜的A-激子弛豫表现为双指数过程,而对于WSe_2,其A-激子衰减表现为三指数过程,且激子的寿命远长于前者. WS_2谷自旋极化弛豫表现为单指数衰减,其寿命约0.35 ps,主要由电子-空穴交换作用所主导.而对于WSe_2,谷自旋弛豫表现出双指数弛豫特性:一个寿命为0.5 ps的快过程和一个寿命为28 ps的慢过程.快过程的弛豫来源于电子-空穴交换作用,而慢过程则由于自旋晶格散射形成暗激子的过程.通过调谐抽运光波长,进一步证实WSe_2较WS_2更容易形成暗激子.     

单层与双层WSe2纳米片层的光致发光

采用气相沉积法制备了WSe₂二维纳米材料,对其低温光致发光谱进行了研究。结果表明：随着WSe₂层数的增加,其光致发光强度单调下降;当WSe₂层数从单层增加为双层时,其发光强度急剧下降,表明其能带结构已从直接带隙转变为间接带隙。进一步研究了双层WSe₂的变温光致发光谱,发现随着温度的升高,双层WSe₂发光峰中A峰峰位的变化基本符合半导体带隙的温度变化规律,而I峰峰位红移与温度基本成线性关系,表明双层WSe₂同时存在间接和直接跃迁,且直接跃迁和间接跃迁特性不同。     

A field-effect WSe2/Si heterojunction diode

It is significant to develop a heterogeneous integration technology to promote the application of two-dimensional (2D) materials in silicon roadmap. In this paper, we reported a field-effect WSe₂/Si heterojunction diode based on ambipolar 2D WSe₂ and silicon on insulator (SOI). Our results indicate that the device exhibits a p-n diode behavior with a rectifying ratio of ～ 300 and an ideality factor of 1.37. As a photodetector, it has optoelectronic properties with a response time of 0.13 ms, responsivity of 0.045 A/W, detectivity of 4.5×10¹⁰ Jones and external quantum efficiency (EQE) of 8.9 %. Due to the ambipolar behavior of the WSe₂, the rectifying and optoelectronic properties of the heterojunction diode can be modulated by the gate electrical field, enabling various potential applications such as logic optoelectronic devices and neuromorphic optoelectronic devices for in-sensor computing circuits. Thanks to the process based on the mature SOI technique, our field-effect heterojunction diode should have obvious advantages in device isolation and integration.     

单层WSe2、MoSe2激子发光的压力诱导K-Λ交互转变

采用机械剥离法在金刚石对顶砧中制备了单层WSe₂和MoSe₂样品,利用高压微区荧光光谱测量技术,在氩传压介质环境下对其激子发光行为进行了高压调控研究。其中单层WSe₂的中性和负电激子演化趋势在2.43 GPa处出现拐点,单层MoSe₂中性激子发光在3.7 GPa处发生了劈裂。结合第一性原理计算分析,确认该不连续现象的产生机制为压力诱导的导带底K-Λ交互转变。该结果可以扩大至整个二维层状材料体系,为发展激子器件垫定基础。     

石墨烯封装单层二硫化钼的热稳定性研究

将单层二硫化钼用石墨烯进行封装,构造了石墨烯和二硫化钼的范德瓦耳斯异质结构,并且分别在氩气（Ar）和氢气（H₂）氛围下,详细研究了被封装的二硫化钼的热稳定性.结果表明：在氩气氛围中,石墨烯封装的二硫化钼在400–1000℃下一直保持稳定,而石墨烯和氧化硅上裸露的二硫化钼在1000℃时几乎全部分解;在氢气氛围中,石墨烯封装的二硫化钼在400–1000℃下一直稳定存在,而石墨烯和氧化硅上裸露的二硫化钼在800℃下已经完全分解.综上可得,在氩气和氢气的氛围下,被石墨烯封装的二硫化钼的热稳定性得到了显著的提高.该研究通过用石墨烯将单层的二硫化钼进行封装以提高其热稳定性,在未来以单层二硫化钼作为基础材料的电子器件中,可以保证其在高温下能够正常工作.该研究也为提高其他二维材料的热稳定性提供了一种可行的方法和思路.     

二硫化钼/石墨烯异质结的界面结合作用及其对带边电位影响的理论研究

采用基于色散修正的平面波超软赝势方法研究了二硫化钼/石墨烯异质结的界面结合作用及其对电荷分布和带边电位的影响.研究表明二硫化钼与石墨烯之间可以形成范德瓦耳斯力结合的稳定堆叠结构.通过能带结构计算,发现二硫化钼与石墨烯的耦合导致二硫化钼成为n型半导体,石墨烯转变成小带隙的p型体系.并通过电子密度差分图证实了界面内二硫化钼附近聚集负电荷,石墨烯附近聚集正电荷,界面内形成的内建电场可以抑制光生电子-空穴对的复合.石墨烯的引入可以调制二硫化钼的能带,使其导带底上移至-0.31 eV,提高了光生电子还原能力,有利于光催化还原反应.     

Modulation of Schottky barrier in XSi2N4/graphene (X=Mo and W) heterojunctions by biaxial strain

Reducing the Schottky barrier height (SBH) and even achieving the transition from Schottky contacts to Ohmic contacts are key challenges of achieving high energy efficiency and high-performance power devices. In this paper, the modulation effects of biaxial strain on the electronic properties and Schottky barrier of MoSi₂N₄ (MSN)/graphene and WSi₂N₄ (WSN)/graphene heterojunctions are examined by using first principles calculations. After the construction of heterojunctions, the electronic structures of MSN, WSN, and graphene are well preserved. Herein, we show that by applying suitable external strain to a heterojunction stacked by MSN or WSN — an emerging two-dimensional (2D) semiconductor family with excellent mechanical properties — and graphene, the heterojunction can be transformed from Schottky p-type contacts into n-type contacts, even highly efficient Ohmic contacts, making it of critical importance to unleash the tremendous potentials of graphene-based van der Waals (vdW) heterojunctions. Not only are these findings invaluable for designing high-performance graphene-based electronic devices, but also they provide an effective route to realizing dynamic switching either between n-type and p-type Schottky contacts, or between Schottky contacts and Ohmic contacts.     

Third-Order Optical Nonlinearity in Two-Dimensional Transition Metal Dichalcogenides

We present a detailed calculation of the linear and nonlinear optical response of four types of monolayer twodimensional (2D) transition-metal dichalcogenides (TMDCs), having the formula MX₂ with M=Mo, W and X=S, Se. The calculations are based on 6-band tight-binding model of TMDCs, and then performing a semi-classical perturbation analysis of response functions. We numerically calculate the linear χ_μν⁽¹⁾ (-ω;ω) and nonlinear surface susceptibility tensors χ_μνζη⁽³⁾(-ω_Σ; ω_r; ω_s; ω_t) with ω_Σ=ω_r+ω_s+ω_t. Both non-degenerate and degenerate cases are studied for thirdharmonic generation and nonlinear refractive index, respectively. Computational results obtained with no external fitting parameters are discussed regarding two recent reported experiments on MoS₂, and thus we can confirm the extraordinarily strong optical nonlinearity of TMDCs. As a possible application, we demonstrate generation of a π/4-rotated squeezed state by means of nonlinear response of TMDCs, in a silica micro-disk resonator covered with the 2D material. Our proposed method will enable accurate calculations of nonlinear optical response, such as four-wave mixing and highharmonic generation in 2D materials and their heterostructures, thus enabling study of novel functionalities of 2D photonic integrated circuits.     

Tunable charge density wave in TiS_3 nanoribbons

Recently, modifications of charge density wave(CDW) in two-dimensional(2D) show intriguing properties in quasi-2D materials such as layered transition metal dichalcogenides(TMDCs). Optical, electrical transport measurements and scanning tunneling microscopy uncover the enormous difference on the many-body states when the thickness is reduced down to monolayer. However, the CDW in quasi-one-dimensional(1D) materials like transition metal trichalcogenides(TMTCs) is yet to be explored in low dimension whose mechanism is likely distinct from their quasi-2D counterparts.Here, we report a systematic study on the CDW properties of titanium trisulfide(TiS_3). Two phase transition temperatures were observed to decrease from 53 K(103 K) to 46 K(85 K) for the bulk and 15-nm thick nanoribbon, respectively,which arises from the increased fluctuation effect across the chain in the nanoribbon structure, thereby destroying the CDW coherence. It also suggests a strong anisotropy of CDW states in quasi-1D TMTCs which is different from that in TMDCs.Remarkably, by using back gate of-30 V ～ 70 V in 15-nm device, we can tune the second transition temperature from110 K(at-30 V) to 93 K(at 70 V) owing to the altered electron concentration. Finally, the optical approach through the impinging of laser beams on the sample surface is exploited to manipulate the CDW transition, where the melting of the CDW states shows a strong dependence on the excitation energy. Our results demonstrate TiS_3 as a promising quasi-1D CDW material and open up a new window for the study of collective phases in TMTCs.     

Reduction of low‐frequency noise in multilayer MoS2 FETs using a Fermi‐level depinning layer

Two‐dimensional transition metal dichalcogenides (TMDCs) are potential candidate materials for future thin‐film field effect transistors (FETs). However, many aspects of this device must be optimized for practical applications. In addition, low‐frequency noise that limits the design window of electronic devices, in general, must be minimized for TMD‐based FETs. In this study, the low‐frequency noise characteristics of multilayer molybdenum disulphide (MoS₂) FETs were investigated in detail, with two different contact structures: titanium (Ti) metal–MoS₂ channel and Ti metal–TiO₂ interlayer–MoS₂ channel. The results showed that the noise level of the device with a TiO₂ interlayer reduced by one order of magnitude compared with the device without the TiO₂ interlayer. This substantial improvement in the noise characteristics could be explained using the carrier number of fluctuation model. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

新型机械解理方法在二维材料研究中的应用

自从石墨烯被发现以来,机械解理技术已经成为制备高质量二维材料的重要方法之一,在二维材料本征物性的研究方面展现出了独特的优势.然而传统机械解理方法存在明显的不足,如制备效率低、样品尺寸小等,阻碍了二维材料领域的研究进展.近些年我们在机械解理技术方面取得了一系列的突破,独立发展了一套具有普适性的新型机械解理方法.这种新型机械解理方法的核心在于通过改变解理过程中的多个参数,增强层状材料与基底之间的范德瓦耳斯相互作用,从而提高单层样品的产率和面积.本文着重以石墨烯为例,介绍了该技术的过程和机理.相比于传统机械解理方法,石墨烯的尺寸从微米量级提高到毫米量级,面积提高了十万倍以上,产率大于95%,同时石墨烯依然保持着非常高的质量.这种新型机械解理方法具有良好的普适性,目前已经在包括MoS₂,WSe₂,MoTe₂,Bi2212等几十种材料体系中得到了毫米量级以上的高质量单层样品.更重要的是,在解理过程中,通过调控不同的参数,可以在层状材料中实现一些特殊结构的制备,如气泡、褶皱结构等,为研究这些特殊材料体系提供了重要的物质保障.未来机械解理技术还有很多值得深入研究的科学问题,该技术的突破将会极大地推动二维材料领域的研究进展.     

Vertical WS_2 spin valve with Ohmic property based on Fe_3GeTe_2 electrodes

The two-dimensional(2 D) transition-metal dichalcogenides(TMDCs) have been recently proposed as a promising class of materials for spintronic applications. Here, we report on the all-2 D van der Waals(vd W) heterostructure spin valve device comprising of an exfoliated ultra-thin WS_2 semiconductor acting as the spacer layer and two exfoliated ferromagnetic Fe_3 GeTe_2(FGT) metals acting as ferromagnetic electrodes. The metallic interface rather than Schottky barrier is formed despite the semiconducting nature of WS_2, which could be originated from the strong interface hybridization. The spin valve effect persists up to the Curie temperature of FGT. Moreover, our metallic spin valve devices exhibit robust spin valve effect where the magnetoresistance magnitude does not vary with the applied bias in the measured range up to 50 μA due to the Ohmic property, which is a highly desirable feature for practical application that requires stable device performance. Our work reveals that WS_2-based all-2 D magnetic vd W heterostructure, facilitated by combining 2 D magnets, is expected to be an attractive candidate for the TMDCs-based spintronic applications.     

金衬底调控单层二硫化钼电子性能的第一性原理研究

基于密度泛函的第一性原理研究了金衬底对单层二硫化钼电子性能的调控作用. 从结合能、能带结构、电子态密度和差分电荷密度四个方面进行了深入研究. 结合能计算确定了硫原子层在界面的排布方式, 并指出这种吸附结构并不稳定. 能带结构分析证实了金衬底与单层二硫化钼形成肖特基接触, 并出现钉扎效应. 电子态密度分析表明金衬底并没有影响硫原子和钼原子之间的共价键, 而是通过调控单层二硫化钼的电子态密度增加其导电率. 差分电荷密度分析表明单层二硫化钼的导电通道可能在界面处产生. 研究结果可对单层二硫化钼晶体管的建模和实验制备提供指导.     

(TiO2)12量子环及过渡金属化合物掺杂对其电子性质影响的密度泛函理论研究

本文采用第一性原理中基于密度泛函理论(DFT)的广义梯度近似(GGA)方法, 设计了一种新的(TiO₂)₁₂ 量子环结构, 研究了它的几何结构、平均结合能及电子云分布等属性. 在此新型结构的基础上, 分别采用过渡金属化合物MoS₂, MoSe₂, MoTe₂, WS₂, WSe₂和WTe₂进行掺杂, 并分析了掺杂后体系的几何结构及电子属性(如平均结合能、能级结构、HOMO-LUMO轨道电子云密度分布和电子态密度等). 计算结果表明: (TiO₂)₁₂量子环直径为1.059 nm, 呈中心对称分布, 且所有原子组成一个二维平面结构, 使其几何结构比较稳定, 另外该量子环HOMO-LUMO轨道电子云分布均匀, 且能隙为3.17 eV, 与半导体材料TiO₂晶体的能隙的实验值(3.2 eV)非常接近. 掺杂后量子环的能隙均大幅减小, 其中WTe₂的掺杂结果能隙最小, 仅为0.61 eV, MoTe₂的掺杂结果能隙最大, 为1.16 eV, 也比掺杂前减小约2.0 eV. 其他掺杂结果的能隙都在1 eV左右, 变化不大. 这个能隙的TiO₂可以利用大部分的太阳光能, 使TiO₂具有更为广泛的应用.     

基于熔融玻璃的预沉积法生长毫米级单晶MoS2及WS2-MoS2异质结

MoS₂是一种具有优异光电性能和奇特物理性质的二维材料,在电子器件领域具有巨大的应用潜力.高效可控生长出大尺寸单晶MoS₂是该材料进入产业应用所必须克服的重大难关,而化学气相沉积技术被认为是工业化生产二维材料的最有效手段.本文介绍了一种利用磁控溅射预沉积钼源至熔融玻璃上,通过快速升温的化学气相沉积技术生长出尺寸达1 mm的单晶MoS₂的方法,并通过引入WO₃粉末生长出了二硫化钼与二硫化钨的横向异质结(WS₂-MoS₂).拉曼和荧光光谱仪测试表明所生长的样品具有较好的晶体质量.利用转移电极技术制备出了背栅器件样品并对其进行了电学测试,在室温常压下开关比可达10~5,迁移率可达4.53 cm~2/(V·s).这种低成本高质量的大尺寸材料生长方法为二维材料电子器件的大规模应用找到了出路.