Mid-infrared Er:ZBLAN fiber laser reaching 3.68 μm wavelength

We report a continuous-wave Er:ZBLAN fiber laser with the operation wavelength reaching 3.68 μm.The midinfrared Er:ZBLAN fiber laser is pumped with the dual-wavelength sources consisting of a commercial laser diode at 970 nm and a homemade Tm-doped fiber laser at 1973 nm.By increasing the launched pump power at1973 nm,the laser wavelength can be switched from 3.52 to 3.68 μm.The maximum output power of 0.85 W is obtained with a slope efficiency of 25.14% with respect to the 1973 nm pump power.In the experiment,the laser emission at 3.68 μm is obtained with a significant power of 0.62 W,which is the longest emission wavelength in free-running Er:ZBLAN fiber lasers.     

2277-W continuous-wave diode-pumped heat capacity laser

A high power continuous-wave (CW) diode-pumped Nd:YAG laser operated in heat capacity mode is demonstrated by use of two identical highly efficient diode-pumped laser heads placed in a plane-plane resonator.The laser heads are uniformly pumped with a five-fold symmetrical side-pumping configuration, and each head is able to output maximum output power of 2200 W at 808 nm.Under a total pump power of 4290 W,the output power of the laser at 1064 nm is up to 2277 W,corresponding to an optical-to-optical efficiency of 53.1%.     

Reducing Thermal Effect in End-Diode-Pumped Laser Crystal by Using a Novel Resonator

We report a new way, i.e. double-end-pumping, to extend the stability range of a laser resonator, in advantage of making the thermal loading be effectively divided between the ends of the laser crystal to reduce the thermal effect, thus to extend the stability range. Using this new way, we experimentally obtained a 2.7-W cw laser source at 671 nm by intracavity frequency doubling of 1342nm ofa Nd:YVO4 laser based on the nonlinear crystal LIB3O5. The maximum pump power is 28 W, which is higher than 13 W of the single-end-pumping.     

A Stable Diffusion-Bonded Tm：YLF Bulk Laser with High Power Output at a Wavelength of 1889.5 nm

A high power diode-pumped diffusion-bonded Tm：YLF laser operating at 1889.5nm with a FWHM linewidth of less than 0.1 nm is reported. A Brewster plate and two Fabry-Perot etalons are inserted in the laser cavity for spectral narrowing and stabilization. Under an incident pump power of 136.8 W, 46.1 W of output power is achieved, corresponding to an optical-to-optical conversion efficiency of 33.7% and a slope efficiency of 42.8%. The laser wavelength shift of only 0.07nm with the incident pump power from 20.1 W to 136.8W is observed. The M2 factor at maximum output power is calculated to be 2.3 in the x-axis and 2.0 in the y-axis, respectively.     

All-solid-state quasi-continuous-wave high power dispersion cavity tunable Ti:sapphire laser

An all-solid-state quasi-continuous-wave dispersion cavity tunable Ti:sapphire laser pumped by a laser diode pumped frequency-doubled Nd:YAG laser is reported. Using a dense flint glass prism as the dispersion element, a tuning range from 730 to 880 nm with the linewidth of 3 nm and the pulse width of 17.2 ns was obtained. The maximum output, power of this laser system was 5.6 W at 786.3 nm corresponding to an optical-to-optical conversion efficiency of 25.5% under the pump power of 22 W.     

All-solid-state quasi-continuous-wave high power dispersion cavity tunable Ti:sapphire laser

An all-solid-state quasi-continuous-wave dispersion cavity tunable Ti:sapphire laser pumped by a laser diode pumped frequency-doubled Nd:YAG laser is reported. Using a dense flint glass prism as the dispersion element, a tuning range from 730 to 880 nm with the linewidth of 3 nm and the pulse width of 17.2ns was obtained. The maximum output power of this laser system was 5.6 W at 786.3 nm corresponding to an optical-to-optical conversion efficiency of 25.5% under the pump power of 22 W.     

Diode-pumped high-efficiency broadband tunable Tm:YAP laser

A laser diode-pumped high-efficiency widely tunable Tm:YAP laser with excellent comprehensive properties is reported.The output power is stable at a given pump power.Under the absorbed pump power of 12.95 W,the maximum output power at 2,010 nm is 5.16 W,corresponding to a slope efficiency of 45.5%.The generated beam profile is close to the Gaussian TEM00 near the maximum pump power.Furthermore,the laser working wavelength can be continuously tuned through optimization from 1,894 to 2,066 nm,which is the widest tunable range for Tm:YAP lasers to date.     

Harmonically pump a femtosecond optical parametric oscillator to 1.13 GHz by a femtosecond 515 nm laser

We demonstrate a harmonically pumped femtosecond optical parametric oscillator(OPO)laser using a frequency-doubled mode-locked Yb:KGW laser at a repetition rate of 75.5 MHz as the pump laser.Based on a bismuth borate nonlinear crystal,repetition rates up to 1.13 GHz are realized,which is 15 times that of the pump laser.The signal wavelength is tunable from 700 nm to 887 nm.The maximum power of the signal is 207 m W at the central wavelength of 750 nm and the shortest pulse duration is 117 fs at 780 nm.The beam quality(M^2 factor)in the horizontal and vertical directions of the output beam are 1.077 and 1.141,respectively.     

Performance of gain-switched all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system

We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti：sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti：sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti：sapphire laser.     

A Laser-Diode-Pumped 7.36 W Continuous-Wave Nd：YVO4 Laser At 1342 nm

An efficient and high-power diode-laser single-end-pumped Nd：YVO4 laser with cw emission at 1342nm is presented. With a crystal single-end-pumped by a fibre-coupled diode laser, an output power of 7.36 W is obtained from the laser cavity of concave-convex, eorresponding to an optical-to-optical conversion efficiency of 32.8%. The laser is operated in TEM00 mode with small rms noise amplitude of 0.3%. This represents, to the best of our knowledge, the highest power obtained from a diode-laser single-end-pumped Nd：YVO4 cw laser at 1342nm 80 far.     

High Power Continuous-Wave and Acousto-Optic Q-Switched Nd：GdVO4 Laser Operated at 912 nm

We present a high power and efficient operation of the ^4F3/2 → ^4I9/2 transition in Nd：GdVO4 at 912nm. In the cw mode, the maximum output power of 8.6 W is achieved when the incident pump power is 40.3 W, leading to a slope efficiency of 33.3% and an optical-optical efficiency of 21.3%. To the best of our knowledge, this is the highest cw laser power at 912nm obtained with the conventional Nd：GdVO4 crystal. Pulsed operation of 912nm laser has also been realized by inserting a small aeousto-optie （A-O） Q-Switch inside the resonator. As a result, the minimal pulse width of 20ns and the average laser power 1.43 W at the repetition rate of lOkHz are obtained, corresponding to 7.1 kW peak power. We believe that this is the highest laser peak power at 912nm. Furthermore, duration of 65ns has also been acquired when the repetition rate is 100 kHz.     

Comparison of Laser Performances of 5at.% Yb:Gd2xY2(1-x)SiO5 Crystals between Different Cutting Directions

We investigate the laser actions of 5at.% Yb:Gd_2xY_2(1-x)SiO₅ (Yb:GYSO; x=0.1) crystals with different cutting directions, parallel and vertical to the growth axis. Our results show that the cutting direction of the sample plays an astonished role in the laser operation. The sample cut vertically to the growth axis possesses the favourable lasing characteristics. Its output power reaches 3.13W at 1060nm with a slope efficiency of 44.68% when the absorbed pump power is 8.9,W. In contrast, the sample cut parallel reaches only 1.65W at 1044nm with a slope efficiency of 33.76% with absorbed pump power of 7.99W. The absorption and emission spectra of the two samples are examined and the merit factor M is calculated. Our analysis is in agreement well with the experimental results. The wavelength tuning range of the superior sample covers from 1013.68nm to 1084.82nm.     

A Laser-Diode End-Pumped Nd:YVO4 Slab Laser at 1342nm

A laser-diode end-pumped Nd：YVO4 slab laser with a fiat-concave stable cavity at 1342nm is demonstrated. Under the pumping power of 92 W, a cw laser of output 17.8 W is obtained with the slope efficiency of 25.6%.     

Simultaneous Generation of Multi-Wavelength Laser from Nd:YAG Crystals in a Cruciform Cavity

A cruciform cavity is presented for multi-wavelength laser generation. On the basis of considering the optimal power ratio and good spatial overlap of the two fundamental beams, the maximum output power of 589 nm laser reaches 3.5 W when the pumping power of Nd：YAG A and Nd：YAG B are 311.5 W and 261.8 W, respectively. At the same time, the other wavelength lasers are also obtained with the output power distribution of 2.5 W at 66Onto, 15 W at 532nm, lOOmW at 1319nm and 240mW at 1064nm. The corresponding beam quality factors are M^2 x = 4.93, M^2 y = 5.01 at 589nm, M^2z = 4.51, M^2 y = 4.85 at 660hm, and M^2 x = 4.12, M^2 y = 3.96 at 532nm, respectively. The instabilities of the three visible lights are measured, which are also less than 2% within three hours.     

高稳定LD泵浦腔内倍频Nd∶YVO4/KTP连续绿光激光器

设计出一种能够较好地补偿激光晶体热效应的激光谐振腔，实现了高稳定LD单端泵浦KTP腔内倍频Nd∶YVO₄连续绿光激光器.当晶体吸收的泵浦功率为24.56 W时，532 nm激光功率达到5.3 W，光-光转换效率达到21.6％，激光模式为TEM00模.在输出功率5W左右时，激光器1 h功率不稳定度优于0.6％     

端面泵浦双Nd: YVO4激光器中热效应对腔稳定性的影响

利用多个激光晶体串接方式可以提高固体激光器的输出功率. 发展双Nd: YVO₄晶体激光器, 将晶体的端面镀膜作为谐振腔的端面镜, 构成了平行平面谐振腔. 对平行平面谐振腔的等效腔进行了理论分析, 结果表明激光晶体吸收泵浦光产生的热透镜效应对保持腔的稳定性起到了重要的作用. 在国内首次进行了双端泵浦双Nd: YVO₄激光器的实验研究, 在抽运功率为 20.74 W时获得了11 W的1064 nm TEM00模激光输出, 其光-光转化效率约为53%. 并且对于不同掺杂浓度下的实验结果进行了讨论.     

Write-Once Medium with Fe-Doped BiOx Thin Films for Blue Laser Recording

Fe：BiOx films are fabricated on K9 glass substrates by rf-magnetron sputtering of a BiFeO target under argon atmosphere with increasing sputtering power from 80 to 200 W at room temperature. It is found that the thin films grown at the sputtering power of 160 W can be formed at an appropriate deposition rate and have an improved surface morphology. The XPS result reveals that the films investigated are comprised of Bi, Fe and O elements. A typical XRD pattern shows that no phase transition occurs in the films up to 400℃. The results of the blue laser recording test demonstrate that the Fe：BiOx films have good writing sensitivity for blue laser beam （406.7nm） and good stability after reading 10000 times. The recording marks of 200nm or less are obtained. These results indicate that the introduction of Fe into BiOx films can reduce the mark size and improve the stability of the films.     

A Single-Longitudinal-Mode Dual-Wavelength cw Tm,Ho:GdVO4 Microchip Laser

A liquid nitrogen cooled dual-wavelength Tm,Ho：GdVO4 microchip laser is reported. The output dual wavelengths axe at 2038.9nm and 2050.1 nm. At each wavelength, the laser has a single longitudinal mode. The threshold power is nearly 20mW and the slope efficiency is 18.7%. The single longitudinal mode output power reaches 98mW, and the ratio of power is about 60% （2038.9nm） and 40% （2050.1 nm）.     

Efficient Pumping Scheme by Direct Excitation of Upper Laser Level in Nd:CNGG

We report an efficient pumping scheme which involves a direct excitation of the upper lasing level of a four-level laser in a Nd-doped Ca₃(NbGa)_2-xGa₃O₁₂ (Nd:CNGG) by using a tunable Ti:sapphire, 700-920nm, cw pump source. The slope efficiency is improved from 10.5% of the traditional band pumping at 808nm to 21.8% of the direct pumping at 882nm. The influence of pumping wavelength on lasing is discussed. We present a scheme of double pumping for lasing.     

Optimized Performances of Thick Film Organic Lighting-Emitting Diodes

The performance of organic light-emitting diodes (OLEDs) with thick film is optimized. The alternative vanadium oxide (V₂O₅) and N,N'-di(naphthalene-1-yl)-N,N'-diphenyl-benzidine (NPB) layers are used to enhance holes in the emissive region, and 4,7-dipheny-1,10-phenanthroline (Bphen) doped 8-tris-hydroxyquinoline aluminium (Alq₃) is used to enhance electrons in the emissive region, thus ITO/V₂O₅ (8nm)/NPB (52nm)/V₂O₅ (8nm)/NPB (52nm)/Alq₃ (30 and 45nm)/Alq₃:Bphen (30wt%, 30 and 45nm)/LiF (1nm)/Al (120nm) devices are fabricated. The thick-film devices show the turn-on voltage of about 3V and the maximal power efficiency of 4.5lm/W, which is 1.46 times higher than the conventional thin-film OLEDs.