Si掺杂Ag基超分辨薄膜读出性能研究

超分辨薄膜是一种能够实现突破光学衍射极限的功能薄膜,它在超分辨近场光存储技术中起到至关重要的作用。采用磁控溅射共溅的方式制备了Ag掺杂一定量Si的超分辨复合薄膜,测试了其作为掩膜层的超分辨光盘读出性能,并获得了最佳的薄膜制备条件,即当Ag溅射功率为55 W,Si为95 W,溅射时间为80s,薄膜厚度为39nm时,超分辨光盘的读出信号载噪比(CNR)最高为28dB。用X射线光电子能谱测量了上述薄膜的组成,用扫描电子显微镜观察了薄膜微区形貌,并用椭圆偏振光谱仪测量了薄膜的光学常数和厚度。超分辨复合薄膜的读出机理可以用Ag的散射型机理解释。光盘在持续读出10万次以后读出信号基本没有下降。     

Novel phthalocyanine thin film for compact disc recordable

In this paper, the spin-coated thin films of phthalocyanine dye are presented. Absorption spectrum of the thin film shows a comparatively broad absorption in the wavelength range 630 - 770 nm. Optical parameters of the thin film were measured by a spectroscopic ellipsometer system. 5-in CD-R discs made of this dye exhibit good performance with Yamaha 20-speed recorder. Jitters of land and pit are less than 30 ns, and the 3T-11T's signals show very good quality. This dye is a promising recording medium for CD-R with much higher recording speed.     

PMMA光盘基片光致聚合反应复制法工艺研究

本文通过测量ＰＭＭＡ基片在光致聚合反应法复制过程中的形变和收缩应力，由此对其产生的机理作了一定的理论分析。通过在凝胶化后施加一定的压力能够减小形变和收缩应力。本文不仅描述了采用二阶段加压法工艺复制的ＣＤ唱片，还描述了用ＳＥＭ观察复制信息的微观形貌。     

用于蓝光(405nm)激光直写的聚乙烯醇/银纳米复合材料薄膜的制备

利用紫外光诱导还原金属前躯体硝酸银(AgNO3),直接在聚乙烯醇(PVA)薄膜中生长银纳米颗粒,成功制备出PVA/Ag纳米复合材料薄膜。利用紫外-可见吸收光谱分析了银离子浓度、紫外光辐照功率和辐照时间对薄膜光谱的影响趋势。通过优化硝酸银浓度、辐照条件来调节薄膜中银纳米颗粒的尺寸和空间分布密度,成功地将此复合薄膜的等离子共振吸收峰位调节为406nm,并用于蓝光(405nm)激光直写光刻。扫描电子显微镜(SEM)观察表明,该材料中纳米颗粒分布均匀,粒径分布较窄;X射线光电子谱(XPS)证实了合成的纳米颗粒为单质银;原子力显微镜(AFM)分析显示薄膜光刻后获得了表面清晰、光滑、规整的图形。     

Write-Once Medium with Fe-Doped BiOx Thin Films for Blue Laser Recording

Fe：BiOx films are fabricated on K9 glass substrates by rf-magnetron sputtering of a BiFeO target under argon atmosphere with increasing sputtering power from 80 to 200 W at room temperature. It is found that the thin films grown at the sputtering power of 160 W can be formed at an appropriate deposition rate and have an improved surface morphology. The XPS result reveals that the films investigated are comprised of Bi, Fe and O elements. A typical XRD pattern shows that no phase transition occurs in the films up to 400℃. The results of the blue laser recording test demonstrate that the Fe：BiOx films have good writing sensitivity for blue laser beam （406.7nm） and good stability after reading 10000 times. The recording marks of 200nm or less are obtained. These results indicate that the introduction of Fe into BiOx films can reduce the mark size and improve the stability of the films.     

Effects of oxygen partial pressure on optical properties of NiO_x films deposited by reactive DC-magnetron sputtering

The influence of oxygen partial pressure on the optical properties of NiOx thin films deposited by reactive DC-magnetron sputtering from a nickel metal target in a mixture gas of oxygen and argon was presented. With the oxygen ratio increasing, the reflectivity of the as-deposited films decreased, and optical band gap increased. Thermogravimetric analysis (TGA) showed that the decompose temperature of the films was above 250℃. After annealed at 400℃, only films deposited at 5% O2/Ar ratio showed high optical contrast which was about 52%. Scanning electron microscope (SEM) results revealed that the changes of surface morphology were responsible for the optical property variations of the films after annealing. Its thermal stability and high optical contrast before and after annealing made it a good potential write-once optical recording medium.