High power all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system

This paper reports a high power, all-solid-state, quasi-continuous-wave tunable Ti:sapphire laser system pumped by laser diode (LD) pumped frequency-doubled Nd:YAG laser. The maximum tuned output power of 4.2 W (797 nm) and tuned average power of 3.7 W were achieved when fixing the Ti:sapphire broadband output power at 5.0 W and applying 750-850 nm broadband coated mirror.     

All-solid-state quasi-continuous-wave high power dispersion cavity tunable Ti:sapphire laser

An all-solid-state quasi-continuous-wave dispersion cavity tunable Ti:sapphire laser pumped by a laser diode pumped frequency-doubled Nd:YAG laser is reported. Using a dense flint glass prism as the dispersion element, a tuning range from 730 to 880 nm with the linewidth of 3 nm and the pulse width of 17.2 ns was obtained. The maximum output, power of this laser system was 5.6 W at 786.3 nm corresponding to an optical-to-optical conversion efficiency of 25.5% under the pump power of 22 W.     

An all-solid-state high power quasi-continuous-wave tunable dual-wavelength Ti：sapphire laser system using birefringence filter

This paper describes a tunable dual-wavelength Ti:sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd:YAG laser as the pumping source, and the birefringence filter as the tuning element. Tunable dual-wavelength outputs with one wavelength range from 700~nm to 756.5~nm, another from 830~nm to 900mn have been demonstrated. With a pump power of 23~W at 532~nm, a repetition rate of 7~kHz and a pulse width of 47.6~ns, an output power of 5.1~W at 744.8~nm and 860.9~nm with a pulse width of 13.2~ns and a line width of 3~nm has been obtained, it indicates an optical-to-optical conversion efficiency of 22.2{\%}.     

高功率高光束质量带内泵浦皮秒放大激光系统

利用片状Nd:YVO4晶体为增益介质,研究了部分端面泵浦板条带内泵浦皮秒放大激光系统。发展了部分端面泵浦板条放大器的模式匹配方式,充分结合了带内泵浦和部分端面泵浦板条放大器二者的优势,最终实现了平均功率60.7W、脉冲宽度16.8ps、重复频率20MHz的皮秒激光放大输出,光-光转换效率达到25.3%,当放大输出功率50 W时,光束质量因子(M2)为1.55。