High-efficiency focusing grating coupler with optimized ultra-short taper

A novel high-efficiency focusing non-uniform grating coupler is proposed to couple light into or off silicon photonic chips for large-scale silicon photonic integration. This kind of grating coupler decreases the transition length of the linking taper between the grating and the single-mode waveguide by at least 80%. The radian of the grating lines and the size of the taper are optimized to improve the coupling efficiency. An experimental coupling efficiency of ~ 68% at 1556.24 nm is obtained after optimization and the whole size of the grating is 12 μm × 30 μm, with a very short taper transition of ~15 μm long.     

Optical pulse shaper with integrated slab waveguide for arbitrary waveform generation using optical gradient force

Integrated optical pulse shaper opens up possibilities for realizing the ultra high-speed and ultra wide-band linear signal processing with compact size and low power consumption. We propose a silicon monolithic integrated optical pulse shaper using optical gradient force, which is based on the eight-path finite impulse response. A cantilever structure is fabricated in one arm of the Mach–Zehnder interferometer（MZI） to act as an amplitude modulator. The phase shift feature of waveguide is analyzed with the optical pump power, and five typical waveforms are demonstrated with the manipulation of optical force. Unlike other pulse shaper schemes based on thermo–optic effect or electro–optic effect, our scheme is based on a new degree of freedom manipulation, i.e., optical force, so no microelectrodes are required on the silicon chip,which can reduce the complexity of fabrication. Besides, the chip structure is suitable for commercial silicon on an insulator（SOI） wafer, which has a top silicon layer of about 220 nm in thickness.     

Optical frequency comb technology for ultra‐broadband radio‐frequency photonics

The outstanding phase‐noise performance of optical frequency combs has led to a revolution in optical synthesis and metrology, covering a myriad of applications, from molecular spectroscopy to laser ranging and optical communications. However, the ideal characteristics of an optical frequency comb are application dependent. In this review, the different techniques for the generation and processing of high‐repetition‐rate (>10 GHz) optical frequency combs with technologies compatible with optical communication equipment are covered. Particular emphasis is put on the benefits and prospects of this technology in the general field of radio‐frequency photonics, including applications in high‐performance microwave photonic filtering, ultra‐broadband coherent communications, and radio‐frequency arbitrary waveform generation.     

Multitasking and Cascadable Microwave Photonic Signal Processing Topologies with Silicon Photonic Technologies

ABSTRACT

Microwave photonics (MWPs) is an emerging interdisciplinary field, where photonics technologies are adopted to facilitate the generation, transmission, detection, and processing of signals at radio-wave, microwave, and millimeter-wave frequencies. Recently, the integrated photonic technology has demonstrated its capability to miniaturize photonic circuits on a single chip, which paves the way for next-generation integrated MWP signal processing systems having reduced size, weight, and power consumption (SWaP) specifications. In particular, by means of incorporating complementary metal-oxide-semiconductor (CMOS) electronic, optical, and optoelectronic components on a single integrated chip, silicon photonic circuits have brought new architectures and functionalities for MWP signal processing. This accelerates the evolution of MWPs from a single-use microwave signal processor toward a multitasking and cascadable MWP system, which is readily adaptable for a wide variety of uses and applications. In this review article, we provide an overview of the fundamental principle of the MWP signal processing topology. Developments in the microwave filtering technologies are reviewed with a focus on the integrated microwave filtering enhanced by optical phase equalization. We also review the recent progress and give an outlook for the future trend in MWP signal topologies, exploring the realization of multitasking and cascadable microwave signal processing systems based on silicon photonics.     

Generation of an arbitrary chirped microwave waveform with high time-bandwidth product for increasing range resolution of RADAR by using photonic technique

An approach for photonic generation of an arbitrary chirped microwave waveform with an increased time-bandwidth product (TBWP) is proposed and experimentally demonstrated. In the proposed model, light from the mode locked laser is splitted into two parts by using 1 × 2 power splitter: one is sent to linearly chirped fiber Bragg grating (LCFBG) through circulator and the other is time delayed by fiber delay line. The optical pulse in upper arm is time stretched by the LCFBG. Meanwhile, the optical pulse in lower arm experiences a time delay and then stretched by the dispersive single mode fiber. Temporal interference pattern is generated with an increasing or decreasing free spectral range by combination of two time-stretched optical pulses. Finally, the temporal interference pattern which is obtained at the output of optical coupler is transformed into an arbitrary chirped microwave waveform by using a photo-detector. The main advantage of this proposed model is high TBWP in the range of 750–1000 which ultimately results in an increased range resolution of radio detection and ranging.     

Microwave photonic filter with a continuously tunable central frequency using an SOI high-Q microdisk resonator

Utilizing a high-Q microdisk resonator(MDR) on a single silicon-on-insulator(SOI) chip, a compact microwave photonic filter(MPF) with a continuously tunable central frequency is proposed and experimentally demonstrated. Assisted by the optical single side-band(OSSB) modulation, the optical frequency response of the MDR is mapped to the microwave frequency response to form an MPF with a continuously tunable central frequency and a narrow 3-dB bandwidth. In the experiment, using an MDR with a compact size of 20×20 μm2and a high Q factor of 1.07×105, we obtain a compact MPF with a high rejection ratio of about 40 dB, a 3-dB bandwidth of about 2 GHz, and a frequency tuning range larger than12 GHz. Our approach may allow the implementation of very compact, low-cost, low-consumption, and integrated notch MPF in a silicon chip.     

A new positron annihilation lifetime spectrometer based on DRS4 waveform digitizing board

Abstract： A new simple digital positron lifetime spectrometer has been developed. It includes a DRS4 waveform digitizing board and two scintillation detectors based on the XP2020Q photomultiplier tubes and LaBr3 scintillators. The DRS4 waveform digitizing can handle small pulses, down to few tens of millivolts, and its time scale linearity and stability are very good. The new system has reached a 206 ps time resolution, which is better than the conventional analog apparatus using the same detectors. These improvements make this spectrometer more simple and convenient in comparison with other spectrometers, and it can be applied to the other scintillation timing measurements with picosecond accuracy.     

Single-shot photonic time-intensity integration based on a time-spectrum convolution system

Real-time and single-shot ultra-fast photonic time-intensity integration of arbitrary temporal waveforms is proposed and demonstrated. The intensity-integration concept is based on a time-spectrum convolution system, where the use of a multi-wavelength laser with a flat envelope, employed as the incoherent broadband source, enables single-shot operation. The experimental implementation is based on optical intensity modulation of the multi-wavelength laser with the input waveform, followed by linear dispersion. In particular, photonic temporal intensity integration with a processing bandwidth of 36.8 GHz over an integration time window of 1.24 ns is verified by experimentally measuring the integration of an ultra-short microwave pulse and an arbitrary microwave waveform.     

基于布里渊载波相移的宽带可调谐二倍频微波信号生成

本文提出并实验验证了一种基于光纤中受激布里渊散射效应的光子二倍频微波信号生成技术.利用布里渊增益谱内的强色散特性,对光强度调制器产生的双边带调制信号的载波进行π/2相移,可实现载波与±1阶边带拍频仅生成二倍频微波信号.由于光纤中受激布里渊散射的窄带特性以及仅对双边带调制信号的载波进行相移,不影响调制信号两个边带的幅值和相位,因而生成的二倍频微波信号可实现宽带调谐,调谐范围仅受其他光器件的工作带宽限制.此外,信号光和产生受激布里渊散射的抽运光均来自同一光源,因而不受波长漂移的影响,系统具良好的稳定性.     

石墨烯-硅基混合光子集成电路

近年来硅基光子学已经慢慢走向成熟,它被认为是未来取代电子集成电路,实现下一代更高性能的光子集成电路的关键技术.这得益于硅基光子器件与现代的互补金属氧化物半导体工艺相兼容,能够实现廉价的大规模集成.然而,由于受硅材料本身的光电特性所限,在硅基平台上实现高性能的有源器件仍然存在着巨大挑战.石墨烯-硅基混合光子集成电路的发展为解决这一问题提供了可行的方案.这得益于石墨烯作为一种兼具高载流子迁移率、高电光系数和宽带吸收等优点的二维光电材料,能够方便地与现有硅基器件相集成,并充分发挥自身的光电性能优势.本文结合我们课题组在该领域研究的一些最新成果,介绍了国际上在石墨烯-硅基混合光子集成电路上的一些重要研究进展,涵盖了光源、光波导、光调制器和光探测器四个重要组成部分.     

Multitap microwave photonic filters with programmable phase response via optical frequency comb shaping

We present a programmable multitap microwave photonic filter with an arbitrary phase response operating over a broad bandwidth. Complex coefficient taps are achieved by optical line-by-line pulse shaping on a 10 GHz flat optical frequency comb using a novel interferometric scheme. Through high-speed real-time measurements, we demonstrate programmable chirp control of a waveform via phase filtering. This achievement enables us to compress broadband microwave signals to their corresponding bandwidth-limited pulse duration.     

Theory study on a photonic-assisted radio frequency phase shifter with direct current voltage control

A photonic-assisted radio frequency phase shifter with direct current voltage control is proposed using a polymer- based integrated Mach-Zehnder modulator. A closed-form expression of radio frequency （RF） signal power and phase is given. Theoretical calculation reveals that by carefully setting the bias voltages, RF signal power variation lower than 1-dB and phase accuracy less than 3° can be achieved and are not degraded by perturbation of modulation index once the bias voltage drift is kept within -3% -- 3%.     

Templated synthesis of highly ordered mesoporous cobalt ferrite and its microwave absorption properties

Based on the nanocasting strategy, highly ordered mesoporous CoFe2O4 is synthesized via the ‘two-solvent’ impregnation method using a mesoporous SBA-15 template. An ordered two-dimensional(P6mm) structure is preserved for the CoFe2O4/SBA-15 composite after the nanocasting. After the SBA-15 template is dissolved by NaOH solution, a mesoporous structure composed of aligned nanoparticles can be obtained, and the P6 mm structure of the parent SBA-15is preserved. With a high specific surface area(above 90 m2/g) and ferromagnetic behavior, the obtained material shows potential in light weight microwave absorption application. The minimum reflection loss(RL) can reach-18 dB at about16 GHz with a thickness of 2 mm and the corresponding absorption bandwidth is 4.5 GHz.     

Breakdown characteristics of AIGaN/GaN Schottky barrier diodes fabricated on a silicon substrate

In this work, the breakdown characteristics of AlGaN/GaN planar Schottky barrier diodes （SBDs） fabricated on the silicon substrate are investigated. The breakdown voltage （BV） of the SBDs first increases as a function of the anodeto-cathode distance and then tends to saturate at larger inter-electrode spacing. The saturation behavior of the BV is likely caused by the vertical breakdown through the intrinsic GaN buffer layer on silicon, which is supported by the post-breakdown primary leakage path analysis with the emission microscopy. Surface passivation and field plate termination are found effective to suppress the leakage current and enhance the BV of the SBDs. A high BV of 601 V is obtained with a low on-resistance of 3.15 mΩ·cm^2.     

Electron field emission characteristics of nano-catkin carbon films deposited by electron cyclotron resonance microwave plasma chemical vapour deposition

This paper reported that the nano-catkin carbon films were prepared on Si substrates by means of electron cyclotron resonance microwave plasma chemical vapour deposition in a hydrogen and methane mixture. The surface morphology and the structure of the fabricated films were characterized by using scanning electron microscopes and Raman spectroscopy, respectively. The stable field emission properties with a low threshold field of 5V/μm corresponding to a current density of about 1μA/cm^2 and a current density of 3.2mA/cm^2 at an electric field of 10V/μm were obtained from the carbon film deposited at CH4 concentration of 8%. The mechanism that the threshold field decreased with the increase of the CH4 concentration and the high emission current appeared at the high CH4 concentration was explained by using the Fowler-Nordheim theory.     

Bidirectional reflectance one-dimensional rough distribution function modeling of surface in the microwave band

In this study, the bidirectional reflectance distribution function （BRDF） of a one-dimensional conducting rough surface and a dielectric rough surface are calculated with different frequencies and roughness values in the microwave band by using the method of moments, and the relationship between the bistatic scattering coefficient and the BRDF of a rough surface is expressed. From the theory of the parameters of the rough surface BRDF, the parameters of the BRDF are obtained using a genetic algorithm. The BRDF of a rough surface is calculated using the obtained parameter values. Further, the fitting values and theoretical calculations of the BRDF are compared, and the optimization results are in agreement with the theoretical calculation results. Finally, a reference for BRDF modeling of a Gaussian rough surface in the microwave band is provided by the proposed method.     

A prototype silicon detector system for space cosmic-ray charge measurement

A readout electronics system used for space cosmic-ray charge measurement for multi-channel silicon detectors is introduced in this paper, including performance measurements. A 64-channel charge sensitive ASIC （VA140） from the IDEAS company is used. With its features of low power consumption, low noise, large dynamic range, and high integration, it can be used in future particle detecting experiments based on silicon detectors.     

Ultrafast optical frequency comb synthesizer and analyzer

We propose an ultrafast optical arbitrary waveform synthesizing/analyzing technique demonstrated with 2 Tbit/s waveforms. An ultrafast waveform was generated by manipulating the amplitude and phase of a 400?GHz optical frequency comb using a newly developed colorless optical synthesizer. The 400?GHz optical frequency comb was generated from a 25?GHz optical frequency comb using a colorless arrayed waveguide grating. This waveform was then analyzed on the frequency axis using a custom heterodyne-detection technique based on the dual-heterodyne mixing method. The phase and amplitude spectra can be observed in parallel using another optical frequency comb as a reference combined with an arrayed waveguide grating. This optical system, named the ultrafast optical frequency comb synthesizer and analyzer, can synthesize and analyze an arbitrary waveform in the THz frequency region.     

Preparation of multi-walled carbon nanotube–Fe composites and their application as light weight and broadband electromagnetic wave absorbers

Multi-walled carbon nanotube （MWCNT）-Fe composites were prepared via the metal organic chemical vapor deposi- tion by depositing iron pentacarbonyl on the surface of MWCNTs. The structural and morphological analyses demonstrated that Fe nanoparticles were deposited on the surface of the MWCNTs. The electromagnetic properties of the MWCNTs were significantly changed, and the absorbing capacity evidently improved after the Fe deposition on the MWCNT surface. A minimum reflection loss of -29.4 dB was observed at 8.39 GHz, and the less than -10 dB bandwidth was about 10.6 GHz, which covered the whole X band （8.2-12.4 GHz） and the whole Ku band （12.4-18 GHz）, indicating that the MWCNT-Fe composites could be used as an effective microwave absorption material.     

Forward and reverse electron transport properties across a CdS/Si multi-interface nanoheterojunction

The electron transport behavior across the interface plays an important role in determining the performance of op- toelectronic devices based on heterojunctions. Here through growing CdS thin film on silicon nanoporous pillar array, an untraditional, nonplanar, and multi-interface CdS/Si nanoheterojunction is prepared. The current density versus voltage curve is measured and an obvious rectification effect is observed. Based on the fitting results and model analyses on the forward and reverse conduction characteristics, the electron transport mechanism under low forward bias, high forward bias, and reverse bias are attributed to the Ohmic regime, space-charge-limited current regime, and modified Poole-Frenkel regime respectively. The forward and reverse electrical behaviors are found to be highly related to the distribution of inter- facial trap states and the existence of localized electric field respectively. These results might be helpful for optimizing the preparing procedures to realize high-performance silicon-based CdS optoelectronic devices.