The simulation of temperature dependence of responsivity and response time for 6H-SiC UV photodetector

In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet (UV) photodetector is simulated based on numerical model in the range from 300K to 900K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.     

Nanosecond polymer Mach-Zehnder interferometer electro-optic modulator using optimized micro-strip line electrode

A Mach-Zehnder interferometer (MZI) electro-optic (EO) modulator based on micro-strip line (MSL) electrode and guest-host EO polymer DR1/SU-8 is experimentally demonstrated. For achieving high response speed, electrode structure is especially optimized and fabrication technology is seriously controlled. The final characteristic impedance of electrode is about 49.4 Ω, and the difference between microwave index (1.5616) and lightwave index (1.6006) is also minimized. At 1,550 nm, the insertion loss and extinction ratio are 12 and 16 dB, respectively, and under switching operation, the rise time and fall time are 16.3 and 16.7 ns, respectively. A long-term monitoring over 2000 hours at room temperature (25 °C) is performed on switching response, and a novel mathematical modeling on response time variation is established using logistic function. The rise time and fall time are observed to change from the initial value of ~16 ns to the stable value of ~28 ns within 300 and 2000 hours, respectively. The device exhibits nanosecond response time by virtue of impedance-matched electrode, small index mismatch and serious control on fabrication process.     

ZnO半导体电导型X射线探测器件研究

本文制备了基于ZnO纳米线阵列和ZnO薄膜的Ag-ZnO-Ag电导型X射线探测器件,研究了它们对X射线的响应特性.薄膜器件在100 V偏置时的响应度达到0.12μC/Gy,纳米线阵列器件在50 V偏压下的响应度达到0.17μC/Gy.器件工作机理研究表明,器件的响应过程与表面氧吸附与解吸附效应有关,氧气吸附与解吸附过程使得X射线辐照下的载流子寿命大幅度增加,从而使得器件对X射线具有较高的响应度.本文研究结果表明ZnO薄膜和纳米线阵列器件在X射线剂量测量领域具有应用前景.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.     

High-speed all-optical switching in ion-implanted silicon-on-insulator microring resonators

We demonstrate high-speed all-optical switching via vertical excitation of an electron-hole plasma in an oxygen-ion implanted silicon-on-insulator microring resonator. Based on the plasma dispersion effect the spectral response of the device is rapidly modulated by photoinjection and subsequent recombination of charge carriers at artificially introduced fast recombination centers. At an implantation dose of 1 x 10(12) cm(-2) the carrier lifetime is reduced to 55 ps, which facilitates optical switching of signal light in the 1.55 mum wavelength range at modulation speeds larger than 5 Gbits/s.     

Fast response ultraviolet photoconductive detectors based on Ga-doped ZnO films grown by radio-frequency magnetron sputtering

A metal-semiconductor-metal photoconductive detector was fabricated on c-axis preferred oriented Ga-doped ZnO (ZnO:Ga) thin film prepared on quartz by radio-frequency magnetron sputtering. With a 10 V bias, a responsivity of about 2.6 A/W at 370 nm was obtained in the ultraviolet region. The photocurrent increases linearly with incident power density for more than two orders of magnitude. The transient response measurement revealed photoresponse with a rise time of 10 ns and a fall time of 960 ns, respectively. The results are much faster than those reported in photoconductive detectors based on unintentionally doped n-type ZnO films.     

Numerical analysis of SiGeSn/GeSn interband quantum well infrared photodetector

In this paper, detailed theoretical investigation on the frequency response and responsivity of a strain balanced SiGeSn/GeSn quantum well infrared photodetector (QWIP) is made. Rate equation and continuity equation in the well are solved simultaneously to obtain photo generated current. Quantum mechanical carrier transport like carrier capture in QW, escape of carrier from the well due to thermionic emission and tunneling are considered in this calculation. Impact of Sn composition in the GeSn well on the frequency response, bandwidth and responsivity are studied. Results show that Sn concentration in the GeSn active layer and applied bias have important role on the performance of the device. Significant bandwidth is obtained at low reverse bias voltage, e.g., 200?GHz is obtained at 0.28?V bias for a single Ge_0.83Sn_0.17 layer. Whereas, the maximum responsivity is of 8.6?mA/W at 0.5?V bias for the same structure. However, this can be enhanced by using MQW structure.     

亚单层InGaAs量子点-量子阱异质结构的时间分辨光致发光谱

测定了亚单层InGaAs/GaAs量子点-量子阱异质结构在5K下的时间分辨光致发光谱.亚单层量 子点的辐射寿命在500 ps 至 800 ps之间，随量子点尺寸的增大而增大，与量子点中激子的 较小的横向限制能以及激子从小量子点向大量子点的隧穿转移有关.光致发光上升时间强烈 依赖于激发强度密度.在弱激发强度密度下，上升时间为 35 ps，纵光学声子发射为主要的 载流子俘获机理.在强激发强度密度下，上升时间随激发强度密度的增加而减小，俄歇过程 为主要的载流子俘获机理.该结果对理解亚单层量子点器件的工作特性非常有用. 关键词： 亚单层 量子点-量子阱 时间分辨光致发光谱     

Nanosecond Bias-Free Mach–Zehnder Electro-Optic Switch Based on Dye-Doped Polymer DR1/SU-8 and Microstrip Line Electrode

Abstract

A bias-free Mach–Zehnder interferometer electro-optic switch is demonstrated with a dye-doped polymer Disperse Red 1 (Tokyo Chemical Industry, Co., LTD, Tokyo, Japan)/SU-8 (MicroChem Corp., Newton, Massachusetts, USA) and microstrip line electrode. The device is carefully designed and optimized for bias-free function and high-speed switching using the three-dimensional beam-propagation method and extended point-matching method, and the switch is seriously fabricated by a wet-etching technique and inductively coupled plasma etching technique for good control of dimension parameters. The measured rise time and fall time at 1,550 nm are both at the level of ~10 ns. Owing to the bias-free function and nanosecond response speed, this switch exhibits potential applications of high-speed optical routing and exchanging.     

低功耗聚合物Mach-Zehnder热光开关

采用传统的半导体工艺制作了聚合物Mach-Zehnder型热光开关.利用扫描电镜观测波导形貌,通过红外摄像机观测波导的近场输出光斑,在通信波段1 550 nm波长下测试了器件的输出光谱.在电极上施加直流信号,测得热光开关的消光比为－15 dB,驱动功率为16 mW.引入直流偏置网络,获得了器件的开关特性曲线,经测量开关上升时间为1.2 ms,下降时间为0.8 ms.     

高比探测率和高速石墨烯/n-GaAs复合结构的光电探测器

混合结构的石墨烯/半导体光电晶体管因其超高的响应度而备受关注。然而,该类光电晶体管通过源-漏电极测试得到的比探测率(D*)容易受到1/f噪声的限制。本文制备了混合结构的石墨烯/GaAs光电探测器,通过源-栅电极测得D*大约为1.82×10¹¹ Jones,与通过源-漏电极测量相比,D*提高了约500倍。这可归因于界面上肖特基势垒对载流子俘获和释放过程的屏蔽作用。此外,探测器的上升时间和下降时间分别是4 ms和37 ms,响应速度相应地提高了2个数量级。该工作为制备高比探测率和高速的光电探测器提供了一种新的思路。     

High-speed electrooptical VOA integrated in silicon-on-insulator

In this paper, we present simulation results of an electrooptical variable optical attenuator (VOA) integrated in silicon-on-insulator waveguide. The device is functionally based on free carriers absorption to achieve attenuation. Beam propagation method (BPM) and two-dimensional semiconductor device simulation tool PISCES-II were used to analyze the dc and transient characteristics of the device. The device has a response time (including rise time and fall time) less than 200 ns, much faster than the thermooptic and micro-electromechanical systems (MEMSs) based VOAs.     

A novel type of ultra fast and ultra soft recovery SiGe/Si heterojunction power diode with an ideal ohmic contact

A novel type of p^+(SiGe)－n^-－n^+ heterojunction switching power diode with high-speed capability is presented to overcome the drawbacks of existing power diodes. The improvement is achieved by using a p^+－n^+ mosaic layer as a substitute for the n^+ region in the conventional p^+(SiGe)－n^-－n^+ diode to realize an `ideal ohmic' contact for electrons and holes simultaneously. Compared with conventional p^+(SiGe)－n^-－n^+ diodes, the ideal ohmic contact p^+(SiGe)－n^-－n^+ diodes have about one third of the reverse recovery time and a half of peak reverse recovery current. Furthermore, the softness factor increases nearly two times and the leakage current decreases 1－2 orders of magnitude. These improvements are achieved without resorting special process step to lower the carrier lifetime and thus the devices could be easily integrated into power ICs. The Ge percentage content of p^+(SiGe) layer is an important parameter for the optimal device design.     

High performance photodetectors based on high quality InP nanowires

In this paper,small diameter InP nanowires with high crystal quality were synthesized through a chemical vapor deposition method.Benefitting from the high crystallinity and large specific surface area of InP nanowires,the simply constructed photodetector demonstrates a high responsivity of up to 1170 A·W ~(-1) and an external quantum efficiency of2.8 × 10~5% with a fast rise time of 110 ms and a fall time of 130 ms,even at low bias of 0.1 V.The effect of back-gate voltage on photoresponse of the device was systematically investigated,confirming that the photocurrent dominates over thermionic and tunneling currents in the whole operation.A mechanism based on energy band theory at the junction between metal and semiconductor was proposed to explain the back-gate voltage dependent performance of the photodetectors.These convincing results indicate that fine InP nanowires will have a brilliant future in smart optoelectronics.     

All-optical switching and pulse routing in a distributed-feedback waveguide device

Results of all-optical switching and pulse-routing experiments with a distributed-feedback multiple-quantum-well (MQW) nonlinear waveguide, operating at 1.55microm , are reported. The MQW material has been engineered, through the controlled introduction of defects, to lower the carrier lifetime from 2.5 ns to 280 ps. The energy required for switching is of the order of 1 pJ or less, the switching time is ~600 ps , and the on-off contrast exceeds 17 dB.     

单模光纤开关特性的研究

首次对单模光纤的开关特性进行了分析和计算,得出了色散光纤中不仅存在开关信号的延迟,而且开关速度将受到限制,给出了计算光纤开关时间(上升时间或下降时间)的公式。公式表明,光纤的开关时间与色散绝对值的平方根成正比,与长度的平方根成正比。工作在1.55μm波长的长1km的G652光纤,其开关时间约为7ps,这一参量最终限制了由光纤构成的二光平开关器件的开关速度。     

Millimetric response of stressed gallium doped germanium photoconductor

Conclusion Conventional Ge:Ga photoconductors presents a residual responsivity at millimetric wavelengths, well below the cut-off wavelength due to the gallium impurity ionization energy. At constant bias voltage, this millimetric responsivity is greatly enhanced when a strong uniaxial stress is applied. We suggest that this response is mainly due to a change in the free hole lifetime when the hole gas is heated by the absorbed microwave photons. This photoconductive process has a shorter response time than the InSb Putley mechanism. Thus optimization of this millimetric Ge:Ga detector could find an application for example for heterodyne detection with larger spectral width than InSb.     

Modelling and experimental measurements of the switching behaviour of semiconductor optical amplifiers

A numerical model for the analysis of the switching response of semiconductor optical amplifiers is presented. Output phase and output power behaviour can be derived. This model considers the amplifier longitudinal nonuniformity related to the variation of the carrier and photon density along the device. Auger recombination and spontaneous and stimulated emissions are included in the model. The gain is considered via the parabolic band approximation. The carrier density distribution appears to play a key role in the amplifier behaviour since the computed results exhibit differences from uniform models. The dynamic evolution of the local carrier and photon density can be derived. This information will prove extremely useful in applications other than switching. The results for various rising and falling steps of electrical current are compared with experimental measurements. Good agreement is obtained for both the phase and the power response, supporting the validity of the model. The device chirping characteristics are analysed and discussed.     

Numerical simulation of the modulation transfer function in planar InGaAs dense arrays

Three-dimensional simulation methodology has been used to evaluate the performance of lattice matched InGaAs/InP double layer planar heterointerface detector arrays. The device characteristics under optical illumination and dark conditions have been computed. The modulation transfer function (MTF) profiles have been calculated with varying device geometries and carrier dynamics. It is found that the p well diffusion radius and minority carrier recombination play important roles in the MTF behaviors of dense arrays. Moderate p well diffusion dimension should be used to balance the device performances between the dark current and MTF profile. Moreover, better MTF characteristic under low light condition can be achieved with higher quality material which has longer recombination lifetime. The influences of underlying mechanisms including photon generated carriers diffusion and carrier recombination processes have been discussed. These simulation methods and results should provide a useful tool for the evaluation and improvement of imaging power of InGaAs focal plane arrays.     

Characterization and optimization of high-power InGaAs/InP photodiodes

The performance of 34-μm-diameter InGaAs/InP charge compensated modified uni-traveling carrier photodiodes (CC MUTCs) is studied using a commercial device simulator based on a drift-diffusion model. Excellent agreement has been achieved between simulations and experiments. The origin of the degradation of responsivity at high optical injection level is investigated. Parameters of the photodiode are further optimized to maximize the saturation current without sacrificing bandwidth and responsivity.