声学参量阵转换效率提高方法

针对参量阵转换效率低的问题,提出了一种通过调节声源表面声阻抗率从而提高转换效率的方法。该方法依据描述声波非线性的Kuznetsov方程,首先通过分析方程中拉格朗日密度对参量阵差频波的影响,获得了拉格朗日密度与声源表面声阻抗率之间的关系式,得出了通过调整声阻抗率可以提高参量阵转换效率的结论。随后提出了利用穿孔板改变声阻抗率的方法,并通过数值仿真验证了该方法的有效性。结果表明,通过在声源周围布置声穿孔板可以改变声阻抗率从而提高参量阵的转换效率。     

高比探测率和高速石墨烯/n-GaAs复合结构的光电探测器

混合结构的石墨烯/半导体光电晶体管因其超高的响应度而备受关注。然而,该类光电晶体管通过源-漏电极测试得到的比探测率(D*)容易受到1/f噪声的限制。本文制备了混合结构的石墨烯/GaAs光电探测器,通过源-栅电极测得D*大约为1.82×10¹¹ Jones,与通过源-漏电极测量相比,D*提高了约500倍。这可归因于界面上肖特基势垒对载流子俘获和释放过程的屏蔽作用。此外,探测器的上升时间和下降时间分别是4 ms和37 ms,响应速度相应地提高了2个数量级。该工作为制备高比探测率和高速的光电探测器提供了一种新的思路。     

Scalability of dark current in silicon PIN photodiode

The mechanism for electrical conduction is investigated by the dark temperature-dependent current–voltage characteristics of Si PIN photodiodes with different photosensitive areas.The characteristic tunneling energy E_(00) can be obtained to be 1.40 me V,1.53 me V,1.74 me V,1.87 me V,and 2.01 me V,respectively,for the photodiodes with L = 0.25 mm,0.5 mm,1 mm,1.5 mm,and 2 mm by fitting the ideality factor n versus temperature curves according to the tunneling-enhanced recombination mechanism.The trap-assisted tunneling-enhanced recombination in the i-layer plays an important role in our device,which is consistent with the experimental result that area-dependent leakage current is dominant with the side length larger than 1 mm of the photosensitive area.Our results reveal that the quality of the bulk material plays an important role in the electrical conduction mechanism of the devices with the side length larger than 1 mm of the photosensitive area.     

采用BCB平整技术的高速850 nm垂直面发射激光器

垂直腔面发射激光器因其具有低阈值、低功耗、可实现高速调制等优势,广泛地应用于光通信和光互连等领域。寄生电容是影响激光器的调制带宽的主要因素之一。本文通过采用低k值的苯并环丁烯（BCB）平整技术有效地降低了垂直腔面发射激光器的寄生电容。详细研究了BCB平整技术的最优工艺参数,为未来高速垂直腔面发射激光器的制造技术提供参考。低k值BCB平整垂直腔面发射激光器在7 μm氧化孔径下3 dB小信号调制带宽可达15.2 GHz。     

采用BCB平整技术的高速850nm垂直面发射激光器（英文）

垂直腔面发射激光器因其具有低阈值、低功耗、可实现高速调制等优势,广泛地应用于光通信和光互连等领域。寄生电容是影响激光器的调制带宽的主要因素之一。本文通过采用低k值的苯并环丁烯(BCB)平整技术有效地降低了垂直腔面发射激光器的寄生电容。详细研究了BCB平整技术的最优工艺参数,为未来高速垂直腔面发射激光器的制造技术提供参考。低k值BCB平整垂直腔面发射激光器在7μm氧化孔径下3 d B小信号调制带宽可达15.2 GHz。     

Graphene/SrTiO_3 interface-based UV photodetectors with high responsivity

Strontium titanate(SrTiO3),which is a crucial perovskite oxide with a direct energy band gap of 3.2 eV,holds great promise for ultraviolet(UV)photodetection.However,the response performance of the conventional SrTiO3-based photodetectors is limited by the large relative dielectric constant of the material,which reduces the internal electric field for electron-hole pair separation to form a current collected by electrodes.Recently,graphene/semiconductor hybrid photodetectors by van-der-Waals heteroepitaxy method demonstrate ultrahigh sensitivity,which is benefit from the interface junction architecture and then prolonged lifetime of photoexcited carriers.Here,a graphene/SrTiO3 interface-based photodetector is demonstrated with an ultrahigh responsivity of 1.2×106 A/W at the wavelength of 325 nm and～2.4×104 A/W at 261 nm.The corresponding response time is in the order of～ms.Compared with graphene/GaN interface junctionbased hybrid photodetectors,～2 orders of magnitude improvement of the ultrahigh responsivity originates from a gain mechanism which correlates with the large work function difference induced long photo-carrier lifetime as well as the low background carrier density.The performance of high responsivity and fast response speed facilitates SrTiO3 material for further efforts seeking practical applications.     

Efficiency-enhanced AlGaInP light-emitting diodes using transparent plasmonic silver nanowires

Silver nanowire(AgNW) networks have been demonstrated to exhibit superior transparent and conductive performance over that of indium-doped tin oxide(ITO) and have been proposed to replace ITO, which is currently widely used in optoelectronic devices despite the scarcity of indium on Earth. In this paper, the current spreading and enhanced transmittance induced by AgNWs, which are two important factors influencing the light output power, were analyzed. The enhanced transmittance was studied by finite-difference time-domain simulation and verified by cathodoluminescence measurements.The enhancement ratio of the light output power decreased as the Ga P layer thickness increased, with enhancement ratio values of 79%, 52%, and 15% for Ga P layer thicknesses of 0.5 μm, 1 μm, and 8 μm, respectively, when an AgNW network was included in Al Ga In P light-emitting diodes. This was because of the decreased current distribution tunability of the AgNW network with the increase of the Ga P layer thickness. The large enhancement of the light output power was caused by the AgNWs increasing carrier spread out of the electrode and the enhanced transmittance induced by the plasmonic AgNWs. Further decreasing the sheet resistance of AgNW networks could raise their light output power enhancement ratio.