Growth and photoluminescence properties of inclined ZnO and ZnCoO thin films on SrTiO_3（110） substrates

ZnO thin film growth prefers different orientations on the etched and unetched SrTiO 3（STO）（110） substrates.Inclined ZnO and cobalt-doped ZnO（ZnCoO） thin films are grown on unetched STO（110） substrates using oxygen plasma assisted molecular beam epitaxy,with the c-axis 42 inclined from the normal STO（110） surface.The growth geometries are ZnCoO[100]//STO[110] and ZnCoO[111]//STO[001].The low temperature photoluminescence spectra of the inclined ZnO and ZnCoO films are dominated by D 0 X emissions associated with A 0 X emissions,and the characteristic emissions for the 2 E（2G）→ 4A2（4F） transition of Co 2＋ dopants and the relevant phonon-participated emissions are observed in the ZnCoO film,indicating the incorporation of Co 2＋ ions at the lattice positions of the Zn 2＋ ions.The c-axis inclined ZnCoO film shows ferromagnetic properties at room temperature.     

Epitaxial Properties of Co-Doped ZnO Thin Films Grown by Plasma Assisted Molecular Beam Epitaxy

High quality Co-doped ZnO thin films are grown on single crystalline Al2O3（0001） and ZnO（0001） substrates by oxygen plasma assisted molecular beam epitaxy at a relatively lower substrate temperature of 450℃. The epitaxial conditions are examined with in-situ reflection high energy electron diffraction （RHEED） and ex-situ high resolution x-ray diffraction （HRXRD）. The epitaxial thin films are single crystal at film thickness smaller than 500nm and nominal concentration of Co dopant up to 20%. It is indicated that the Co cation is incorporated into the ZnO matrix as Co^2＋ substituting Zn^2＋ ions. Atomic force microscopy shows smooth surfaces with rms roughness of 1.9 nm. Room-temperature magnetization measurements reveal that the Co-doped ZnO thin films are ferromagnetic with Curie temperatures Tc above room temperature.     

Effects of doping concentration on properties of Mn-doped ZnO thin films

This paper reports that the radio frequency magnetron sputtering is used to fabricate ZnO and Mn-doped ZnO thin films on glass substrates at 500~°C. The Mn-doped ZnO thin films present wurtzite structure of ZnO and have a smoother surface, better conductivity but no ferromagnetism. The x-ray photoelectron spectroscopy results show that the binding energy of Mn_2p3 / 2 increases with increasing Mn content slightly, and the state of Mn in the Mn-doped ZnO thin films is divalent. The chemisorbed oxygen in the Mn-doped ZnO thin films increases with increasing Mn doping concentration. The photoluminescence spectra of ZnO and Mn-doped ZnO thin films have a similar ultraviolet emission. The yellow green emissions of 4~wt.% and 10~wt.% Mn-doped thin films are quenched, whereas the yellow green emission occurs because of abundant oxygen vacancies in the Mn-doped ZnO thin films after 20~wt.% Mn doping. Compared with pure ZnO thin film, the bandgap of the Mn-doped ZnO thin films increases with increasing Mn content.     

Effect of Annealing Conditions on Properties of Sol-Gel Derived Al-Doped ZnO Thin Films

Transparent conductive Al-doped ZnO （AZO） thin films are prepared on normal glass substrates by the sol-gel spin coating method. The effects of drying conditions, annealing temperature and cooling rate on the structural, electrical and optical properties of AZO films are investigated by x-ray diffraction, scanning electron microscopy, the four-point probe method and UV-VIS spectrophotometry, respectively. The deposited films show a hexagonal wurtzite structure and high preferential c-axis orientation. As the drying temperature increases from 100℃ to 300℃ the resistivity of AZO films decreases dramatically. In contrast to the annealed films cooled in a furnace and in air, the resistivity of the annealed film which is cooled at -15℃is greatly reduced. Increasing the cooling rate dramatically increases the electrical conductivity of AZO films.     

Effect of Different Substrate Temperature on Sb-Doped ZnO Thin Films Prepared by Pulsed Laser Deposition on Sapphire Substrates

Sb-doped ZnO thin films are deposited on c-plane sapphire substrates by pulsed laser deposition. Hall results indicate that the conductivity of the Sb-doped ZnO thin films is strongly dependent on the substrate temperature. The sample deposited at the temperature of 550°C exhibits p-type conductivity. It gives a resistivity of 15.25Ω＆#12539;cm, with a Hall mobility of 1.79cm2V-1s-1 and a carrier concentration of 2.290×1017cm-3 at room temperature. The x-ray diffraction indicates that the Sb-doped ZnO thin films deposited in the range of 450-650°C are high c-axis oriented. Low-temperature photoluminescence spectra indicate that the sample deposited at 550°C shows the strong acceptor-bound exciton （A0X） emission.     

Propagations of Rayleigh and Love waves in ZnO films/glass substrates analyzed by three-dimensional finite element method

Propagation characteristics of surface acoustic waves(SAWs) in ZnO films/glass substrates are theoretically investigated by the three-dimensional(3D) finite element method. At first, for(11ˉ20) ZnO films/glass substrates, the simulation results confirm that the Rayleigh waves along the [0001] direction and Love waves along the [1ˉ100] direction are successfully excited in the multilayered structures. Next, the crystal orientations of the ZnO films are rotated, and the influences of ZnO films with different crystal orientations on SAW characterizations, including the phase velocity, electromechanical coupling coefficient, and temperature coefficient of frequency, are investigated. The results show that at appropriate h/λ, Rayleigh wave has a maximum k~2 of 2.4% in(90°, 56.5°, 0°) ZnO film/glass substrate structure; Love wave has a maximum k~2 of 3.81% in(56°, 90°, 0°) ZnO film/glass substrate structure. Meantime, for Rayleigh wave and Love wave devices, zero temperature coefficient of frequency(TCF) can be achieved at appropriate ratio of film thickness to SAW wavelength. These results show that SAW devices with higher k~2 or lower TCF can be fabricated by flexibly selecting the crystal orientations of ZnO films on glass substrates.     

PREPARATION OF a-AXIS ORIENTED YBa2Cu3Ox THIN FILMS

The a-axis oriented YBa₂Cu₃O_x(YBCO) thin films could be grown on (100) SrTiO₃(STO) substrates with STO buffer layers by dc and rf magnetron sputtering either by low-ering the deposition temperature, or by using a self-template technique. For the latter, the resistivity of the thin film at 290K along the substrate [001] direction is about four times larger than that in the [010] direction. The zero resistance temperatures T_c0 are 89 K in both directions. So high quality a-axis oriented YBCO thin films can be prepared by the self-template technique. Also the T_c0 increase monotonously with the reduction of the thickness of the YBCO seed layer.     

Influence of Concentration of Vanadium in Zinc Oxide on Structural and Optical Properties with Lower Concentration

ZnO films doped with different vanadium concentrations are deposited onto glass substrates by dc reactive magnetron sputtering using a zinc target doped with vanadium. The vanadium concentrations are examined by energy dispersive spectroscopy （EDS） and the charge state of vanadium in ZnO thin films is characterized by x-ray photoelectron spectroscopy. The results of x-ray diffraction （XRD） show that all the films have a wurtzite structure and grow mainly in the c-axis orientation. The grain size and residual stress in the deposited films are estimated by fitting the XRD results. The optical properties of the films are studied by measuring the transmittance. The optical constants （refractive index and extinction coefficient） and the film thickness are obtained by fitting the transmittance. All the results are discussed in relation with the doping of the vanadium.     

L lo FePt thin films with [001] crystalline growth fabricated by ZnO addition and rapid thermal annealing

FePt films with a high degree of order S of the L10 structure （S 〉 0.90） and well defined [001] crystalline growth perpendicular to the film plane are fabricated on thermally oxidized Si substrates by the addition of ZnO and a successive rapid thermal annealing （RTA） process. The optimum condition to prepare high-ordering L10 FePtZnO films is 20 vol% ZnO addition and 450 ℃ annealing. The effect of the ZnO additive on the ordering process of the L10 FePtZnO films is discussed. In the annealing process, Zn atoms move to the film surface and evaporate. The motion of the Zn atoms accelerates the intergrain exchange and decreases the ordering temperature.     

Structural and photoluminescent properties of ZnO films deposited by radio frequency reactive sputtering

Zinc oxide films with c-axis preferred orientation were deposited on silicon (100) substrates by radio frequency (RF) reactive sputtering. The properties of the sam- ples were characterized by X-ray diffractometer, X-ray photoelectron spectroscopy and fluorescent-spectrophotometer. The effect of sputtering power and substrate temperature on the structural and photoluminescent (PL) properties of the ZnO films was investigated. The results indicated that when the sputtering power is 100 W and the substrate temperature is 300-400℃, it is suitable for the growth of high c-axis orientation and small strain ZnO films. A violet peak at about 380 nm and a blue band at about 430 nm were observed in the room temperature photolumines- cence spectra, and the origin of blue emission was investigated.     

Deposition of ZnO thin films on (100) γ-LiAlO2 substrate

Optical properties for ZnO thin films grown on (100) γ-LiAlO2 (LAO) substrate by pulsed laser deposition method were investigated. The c-axis oriented ZnO films were grown on (100) γ-LiAlO2 substrates at the substrate temperature of 550 C. The transmittance of the films was over 85%. Peaks attributed to excitons were shown in absorption spectra, which indicated that thin films had high crystallinity. Photoluminescence spectra with the maximum peak at 540 nm were observed at room temperature, which seemed to be ascribed to oxygen vacancy in the ZnO films caused by diffusion of Li from the substrates into the films during the deposition.     

Comparisons of Structural and Optical Properties of ZnO films Grown on Sapphire and Si（001）

Zinc oxide films were grown on sapphire and Si(001) substrates by reactive electron beam evaporation at low substrate temperatures,Atomic force microscopy(AFM),x-ray diffraction(XRD),and photoluminescence excitation(PLE) are employed to characterize the as-grown films.The AFM measurements have shown that all of the ZnO films present pillar-like growth properties.but the dimensional uniformity of the ZnO crystal pillars grown on sapphire was better than that on Si(001),The XRD results indicated that the prepared ZnO films both on sapphire and Si(001) were all highly c-axis oriented.the linewidths of ZnO(002)are only 0.19 and 0.28,respectively,The PLE characterizations revealed the continum absorption of the samples grown on sapphire,However,in the PLE spectra of the ZnO films grown on Si(001) substrates,a broad peak appears at the high-energy region,which indicates the formation of ZnO quantum dot structures on Si(001).     

Ll_0 FePt thin films with 001crystalline growth fabricated by ZnO addition and rapid thermal annealing

FePt films with a high degree of order S of the L1 0 structure (S 0.90) and well defined 001crystalline growth perpendicular to the film plane are fabricated on thermally oxidized Si substrates by the addition of ZnO and a successive rapid thermal annealing (RTA) process. The optimum condition to prepare high-ordering L1 0 FePtZnO films is 20 vol% ZnO addition and 450℃annealing. The effect of the ZnO additive on the ordering process of the L1 0 FePtZnO films is discussed. In the annealing process, Zn atoms move to the film surface and evaporate. The motion of the Zn atoms accelerates the intergrain exchange and decreases the ordering temperature.     

Room-temperature anomalous Hall effect and magnetroresistance in (Ga, Co)-codoped ZnO diluted magnetic semiconductor films

This paper reports that the(Ga,Co)-codoped ZnO thin films have been grown by inductively coupled plasma enhanced physical vapour deposition.Room-temperature ferromagnetism is observed for the as-grown thin films.The x-ray absorption fine structure characterization reveals that Co 2+ and Ga 3+ ions substitute for Zn 2+ ions in the ZnO lattice and exclude the possibility of extrinsic ferromagnetism origin.The ferromagnetic(Ga,Co)-codoped ZnO thin films exhibit carrier concentration dependent anomalous Hall effect and positive magnetoresistance at room temperature.The mechanism of anomalous Hall effect and magneto-transport in ferromagnetic ZnO-based diluted magnetic semiconductors is discussed.     

Deposition of hexagonal boron nitride thin films on silver nanoparticle substrates and surface enhanced infrared absorption

Silver nanoparticle thin films with different average particle diameters are grown on silicon substrates. Boron nitride thin films are then deposited on the silver nanoparticle interlayers by radio frequency （RF） magnetron sputtering. The boron nitride thin films are characterized by Fourier transform infrared spectra. The average particle diameters of silver nanoparticle thin films are 126.6, 78.4, and 178.8 nm. The results show that the sizes of the silver nanoparticles have effects on the intensities of infrared spectra of boron nitride thin films. An enhanced infrared absorption is detected for boron nitride thin film grown on silver nanoparticle thin film. This result is helpful to study the growth mechanism of boron nitride thin film.     

Fabrication and optical properties of MgxZn1-xO thin films

MgxZn1xO (x ≤ 0.3) thin films have been prepared on silicon substrates by radio frequency magnetron sputtering at room temperature. The thin films have hexagonal wurtzite single-phase structure and a preferred orientation with the c-axis perpendicular to the substrates. The Mg content in the films is slightly larger than that in the targets. The refractive indices of MgxZn1xO films measured at room temperature by spectroscopic ellipsometry (SE) on the wavelength 632.8 nm are systematically decreased with the increasing of Mg content. Optical band gaps of Mg x Zn 1 x O films are determined by the transmittance spectra. With increasing Mg content, the absorption edges of MgxZn1xO films shift to higher energies and band gaps linearly increase from 3.24 eV at x=0 to 3.90 eV at x=0.30.     

Effect of Ag Doping on Optical and Electrical Properties of ZnO Thin Films

ZnO thin films were prepared on p-type Si (100) substrates by the sol-gel process. The influence of Ag doping at a content of 0.002% on the photoluminescence and current-voltage (I - V) characteristics of ZnO thin films has been investigated. It is found that Ag doping leads to a pronounced increase in the intensity of near band edge emission at 3.23eV and a remarkable red shift of the visible broadband at room temperature. The I - V characteristics of ZnO/p-Si heterojunctions are also changed. These results could be explained by Ag substituting for Zn in Ag doped ZnO thin films.     

Laser-induced voltage effects in Ca3Co4O9 thin films on tilted LaAlO3（001） substrates grown by chemical solution deposition

Laser-induced voltage effects in c-axis oriented Ca3Co4O9 thin films have been studied with samples fabricated on 10 tilted LaAlO3(001) substrates by a simple chemical solution deposition method. An open-circuit voltage with a rise time of about 10 ns and full width at half maximum of about 28 ns is detected when the film surface is irradiated by a 308-nm laser pulse with a duration of 25 ns. Besides, open-circuit voltage signals are also observed when the film surface is irradiated separately by the laser pulses of 532 nm and 1064 nm. The results indicate that Ca3Co4O9 thin films have a great potential application in the wide range photodetctor from the ultraviolet to near infrared regions.     

Ultraviolet Luminescence in Mg0.12Zn0.88O Alloy Films

We investigate the origin of ultraviolet （UV） emission from Mg0.12 Zn0.88 O alloy thin films with a wurtzite structure fabricated on c-plane Al2O3 substrates by plasma assisted molecular beam epitaxy. At room temperature, the absorption edge and UV emission band of the Mg0.12Zn0.88O film shift to high-energy side compared with ZnO films. Temperature dependence of the photoluminescence spectra shows that the UV emission is composed of free exciton and neutral donor bound exciton emissions. Two-step dissociation processes of the UV emission are observed with the increasing temperature. The thermal quenching mechanism is attributed to the dissociation of the free exciton from the neutral donor bound exciton in the low temperature region and the dissociation of free electron and hole from the free exciton in the high temperature region.     

Room-Temperature Ferromagnetism in Zn1-xMnxO Thin Films Deposited by Pulsed Laser Deposition

Zn1-xMnxO （x = O.Olq3.1） thin films with a Curie temperature above 300K are deposited on Al2O3 （0001） substrates by pulsed laser deposition. X-ray diffraction （XRD）, ultraviolet （UV）-visible transmission and Raman spectroscopy are employed to characterize the microstructural properties of these films. Room temperature ferromagnetism is observed by superconducting quantum interference device （SQUID）. The results indicate that Mn doping introduces the incorporation of Mn^2＋ ions into the ZnO host matrix and the insertion of Mn^2＋ ions increases the lattice defects, which is correlated with the ferromagnetism of the obtained films. The doping concentration is also proven to be a crucial factor for obtaining highly ferromagnetic Zn1-xMnxO films.