A uniform doping ultra-thin SOI LDMOS with accumulation-mode extended gate and back-side etching technology

A uniform doping ultra-thin silicon-on-insulator(SOI) lateral-double-diffused metal-oxide-semiconductor(LDMOS)with low specific on-resistance(R_on,sp) and high breakdown voltage(BV) is proposed and its mechanism is investigated.The proposed LDMOS features an accumulation-mode extended gate(AG) and back-side etching(BE). The extended gate consists of a P– region and two diodes in series. In the on-state with VGD 0, an electron accumulation layer is formed along the drift region surface under the AG. It provides an ultra-low resistance current path along the whole drift region surface and thus the novel device obtains a low temperature distribution. The R_on,sp is nearly independent of the doping concentration of the drift region. In the off-state, the AG not only modulates the surface electric field distribution and improves the BV, but also brings in a charge compensation effect to further reduce the R_on,sp. Moreover, the BE avoids vertical premature breakdown to obtain high BV and allows a uniform doping in the drift region, which avoids the variable lateral doping(VLD) and the "hot-spot" caused by the VLD. Compared with the VLD SOI LDMOS, the proposed device simultaneously reduces the R_on,sp by 70.2% and increases the BV from 776 V to 818 V.     

高k介质电导增强SOI LDMOS机理与优化设计

本文提出一种高k介质电导增强SOI LDMOS新结构（HK CE SOI LDMOS）,并研究其机理. HK CE SOI LDMOS的特征是在漂移区两侧引入高k介质,反向阻断时,高k介质对漂移区进行自适应辅助耗尽,实现漂移区三维RESURF效应并调制电场,因而提高器件耐压和漂移区浓度并降低导通电阻. 借助三维仿真研究耐压、比导通电阻与器件结构参数之间的关系. 结果表明,HK CE SOI LDMOS与常规超结SOI LDMOS相比,耐压提高16%–18%,同时比导通电阻降低13%–20%,且缓解了由衬底辅助耗尽效应带来的电荷非平衡问题. 关键词： k介质')" href="#">高k介质 绝缘体上硅 (SOI) 击穿电压 比导通电阻     

Improving breakdown voltage performance of SOI power device with folded drift region

A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedded in the active layer,which results in an increase of length of ionization integral remarkably. The crowding phenomenon of electric field in the corner of IDT is relieved by the N/P pillars. Both traits improve two key factors of BV, the ionization integral length and electric field magnitude, and thus BV is significantly enhanced. The electric field in the dielectric layer is enhanced and a major portion of bias is borne by the oxide layer due to the accumulation of inverse charges(holes) at the corner of IDT.The average value of the lateral electric field of the proposed device reaches 60 V/μm with a 10 μm drift length, which increases by 200% in comparison to the conventional SOI LDMOS, resulting in a breakdown voltage of 607 V.     

Ultralow turnoff loss dual-gate SOI LIGBT with trench gate barrier and carrier stored layer

A novel ultralow turnoff loss dual-gate silicon-on-insulator(SOI) lateral insulated gate bipolar transistor(LIGBT) is proposed. The proposed SOI LIGBT features an extra trench gate inserted between the p-well and n-drift, and an n-type carrier stored(CS) layer beneath the p-well. In the on-state, the extra trench gate acts as a barrier, which increases the carrier density at the cathode side of n-drift region, resulting in a decrease of the on-state voltage drop(Von). In the off-state, due to the uniform carrier distribution and the assisted depletion effect induced by the extra trench gate, large number of carriers can be removed at the initial turnoff process, contributing to a low turnoff loss(Eoff). Moreover, owing to the dual-gate field plates and CS layer, the carrier density beneath the p-well can greatly increase, which further improves the tradeoff between Eoffand Von. Simulation results show that Eoff of the proposed SOI LIGBT can decrease by 77% compared with the conventional trench gate SOI LIGBT at the same Von of 1.1 V.     

Novel fast-switching LIGBT with P-buried layer and partial SOI

A novel silicon-on-insulator lateral insulated gate bipolar transistor(SOI LIGBT)is proposed in this paper.The proposed device has a P-type buried layer and a partial-SOI layer,which is called the BPSOI-LIGBT.Due to the electric field modulation effect generated by the P-type buried layer and the partial-SOI layer,the proposed structure generates two new peaks in the surface electric field distribution,which can achieve a smaller device size with a higher breakdown voltage.The smaller size of the device is beneficial to the fast switching.The simulation shows that under the same size,the breakdown voltage of the BPSOI LIGBT is 26%higher than that of the conventional partial-SOI LIGBT(PSOI LIGBT),and 84%higher than the traditional SOI LIGBT.When the forward voltage drop is 2.05 V,the turn-off time of the BPSOI LIGBT is 71%shorter than that of the traditional SOI LIGBT.Therefore,the proposed BPSOI LIGBT has a better forward voltage drop and turn-off time trade-off than the traditional SOI LIGBT.In addition,the BPSOI LIGBT effectively relieves the self-heating effect of the traditional SOI LIGBT.     

High-speed waveguide-integrated Ge/Si avalanche photodetector

Waveguide-integrated Ge/Si heterostructure avalanche photodetectors(APDs) were designed and fabricated using a CMOS-compatible process on 8-inch SOI substrate. The structure of the APD was designed as separate-absorption-chargemultiplication(SACM) using germanium and silicon as absorption region and multiplication region, respectively. The breakdown voltage(V_b) of such a device is 19 V at reverse bias and dark current appears to be 0.71 μA at 90% of the V_b. The device with a 10-μm length and 7-μm width of Ge layer shows a maximum 3-dB bandwidth of 17.8 GHz at the wavelength of 1550 nm. For the device with a 30-μm-length Ge region, gain-bandwidth product achieves 325 GHz.     

Breakdown voltage model and structure realization of a thin silicon layer with linear variable doping on a silicon on insulator high voltage device with multiple step field plates

Based on the theoretical and experimental investigation of a thin silicon layer(TSL) with linear variable doping(LVD) and further research on the TSL LVD with a multiple step field plate(MSFP),a breakdown voltage(BV) model is proposed and experimentally verified in this paper.With the two-dimensional Poisson equation of the silicon on insulator(SOI) device,the lateral electric field in drift region of the thin silicon layer is assumed to be constant.For the SOI device with LVD in the thin silicon layer,the dependence of the BV on impurity concentration under the drain is investigated by an enhanced dielectric layer field(ENDIF),from which the reduced surface field(RESURF) condition is deduced.The drain in the centre of the device has a good self-isolation effect,but the problem of the high voltage interconnection(HVI) line will become serious.The two step field plates including the source field plate and gate field plate can be adopted to shield the HVI adverse effect on the device.Based on this model,the TSL LVD SOI n-channel lateral double-diffused MOSFET(nLDMOS) with MSFP is realized.The experimental breakdown voltage(BV) and specific on-resistance(R on,sp) of the TSL LVD SOI device are 694 V and 21.3 ·mm 2 with a drift region length of 60 μm,buried oxide layer of 3 μm,and silicon layer of 0.15 μm,respectively.     

具有L型源极场板的双槽绝缘体上硅高压器件新结构

为了提高小尺寸绝缘体上硅(SOI)器件的击穿电压,同时降低器件比导通电阻,提出了一种具有L型源极场板的双槽SOI高压器件新结构.该结构具有如下特征:首先,采用了槽栅结构,使电流纵向传导面积加宽,降低了器件的比导通电阻;其次,在漂移区引入了Si O2槽型介质层,该介质层的高电场使器件的击穿电压显著提高;第三,在槽型介质层中引入了L型源极场板,该场板调制了漂移区电场,使优化漂移区掺杂浓度大幅增加,降低了器件的比导通电阻.二维数值仿真结果表明:与传统SOI结构相比,在相同器件尺寸时,新结构的击穿电压提高了151%,比导通电阻降低了20%;在相同击穿电压时,比导通电阻降低了80%.与相同器件尺寸的双槽SOI结构相比,新结构保持了双槽SOI结构的高击穿电压特性,同时,比导通电阻降低了26%.     

Analysis of the breakdown mechanism for an ultra high voltage high-side thin layer silicon-on-insulator p-channel low-density metal-oxide semiconductor

This paper discusses the breakdown mechanism and proposes a new simulation and test method of breakdown voltage(BV) for an ultra-high-voltage(UHV) high-side thin layer silicon-on-insulator(SOI) p-channel lateral double-diffused metal-oxide semiconductor(LDMOS).Compared with the conventional simulation method,the new one is more accordant with the actual conditions of a device that can be used in the high voltage circuit.The BV of the SOI p-channel LDMOS can be properly represented and the effect of reduced bulk field can be revealed by employing the new simulation method.Simulation results show that the off-state(on-state) BV of the SOI p-channel LDMOS can reach 741(620) V in the 3-μm-thick buried oxide layer,50-μm-length drift region,and at 400 V back-gate voltage,enabling the device to be used in a 400 V UHV integrated circuit.     

Partial-SOI high voltage P-channel LDMOS with interface accumulation holes

A new partial SOI (silion-on-insulator) (PSOI) high voltage P-channel LDMOS (lateral double-diffused metal-oxide semiconductor) with an interface hole islands (HI) layer is proposed and its breakdown characteristics are investigated theoretically. A high concentration of charges accumulate on the interface, whose density changes with the negative drain voltage, which increase the electric field (E_I) in the dielectric buried oxide layer (BOX) and modulate the electric field in drift region . This results in the enhancement of the breakdown voltage (BV). The values of E_I and BV of an HI PSOI with a 2-μm thick SOI layer over a 1-μm thick buried layer are 580V/μm and -582 V, respectively, compared with 81.5 V/μm and -123 V of a conventional PSOI. Furthermore, the Si window also alleviates the self-heating effect (SHE). Moreover, in comparison with the conventional device, the proposed device exhibits low on-resistance.     

超短沟道绝缘层上硅平面场效应晶体管中热载流子注入应力导致的退化对沟道长度的依赖性

随着场效应晶体管(MOSFET)器件尺寸的进一步缩小和器件新结构的引入, 学术界和工业界对器件中热载流子注入(hot carrier injections, HCI)所引起的可靠性问题日益关注. 本文研究了超短沟道长度(L=30–150 nm)绝缘层上硅(silicon on insulator, SOI)场效应晶体管在HCI应力下的电学性能退化机理. 研究结果表明, 在超短沟道情况下, HCI 应力导致的退化随着沟道长度变小而减轻. 通过研究不同栅长器件的恢复特性可以看出, 该现象是由于随着沟道长度的减小, HCI应力下偏压温度不稳定性效应所占比例变大而导致的. 此外, 本文关于SOI器件中HCI应力导致的退化和器件栅长关系的结果与最近报道的鳍式场效晶体管(FinFET)中的结果相反. 因此, 在超短沟道情况下, SOI平面MOSFET器件有可能具有比FinFET器件更好的HCI可靠性.     

A high voltage silicon-on-insulator lateral insulated gate bipolar transistor with a reduced cell-pitch

A high voltage( 600 V) integrable silicon-on-insulator(SOI) trench-type lateral insulated gate bipolar transistor(LIGBT) with a reduced cell-pitch is proposed.The LIGBT features multiple trenches(MTs):two oxide trenches in the drift region and a trench gate extended to the buried oxide(BOX).Firstly,the oxide trenches enhance electric field strength because of the lower permittivity of oxide than that of Si.Secondly,oxide trenches bring in multi-directional depletion,leading to a reshaped electric field distribution and an enhanced reduced-surface electric-field(RESURF) effect.Both increase the breakdown voltage(BV).Thirdly,oxide trenches fold the drift region around the oxide trenches,leading to a reduced cell-pitch.Finally,the oxide trenches enhance the conductivity modulation,resulting in a high electron/hole concentration in the drift region as well as a low forward voltage drop(Von).The oxide trenches cause a low anode-cathode capacitance,which increases the switching speed and reduces the turn-off energy loss(Eoff).The MT SOI LIGBT exhibits a BV of 603 V at a small cell-pitch of 24 μm,a Von of 1.03 V at 100 A/cm-2,a turn-off time of 250 ns and Eoff of 4.1×10?3 mJ.The trench gate extended to BOX synchronously acts as dielectric isolation between high voltage LIGBT and low voltage circuits,simplifying the fabrication processes.     

Low Specific On-Resistance SOI LDMOS with Non-Depleted Embedded P-Island and Dual Trench Gate

A new silicon-on-insulator(SOI) trench lateral double-diffused metal oxide semiconductor(LDMOS) with a reduced specific on-resistance R_(on),sp is presented. The structure features a non-depleted embedded p-type island(EP) and dual vertical trench gate(DG)(EP-DG SOI). First, the optimized doping concentration of drift region is increased due to the assisted depletion effect of EP. Secondly, the dual conduction channel is provided by the DG when the EP-DG SOI is in the on-state. The increased optimized doping concentration of the drift region and the dual conduction channel result in a dramatic reduction in R_(on),sp. The mechanism of the EP is analyzed,and the characteristics of R_(on),sp and breakdown voltage(BV) are discussed. Compared with conventional trench gate SOI LDMOS, the EP-DG SOI decreases R_(on),sp by 47.1% and increases BV from 196 V to 212 V at the same cell pitch by simulation.     

Vertical polarization-induced doping InN/InGaN heterojunction tunnel FET with hetero T-shaped gate

A novel vertical InN/InGaN heterojunction tunnel FET with hetero T-shaped gate as well as polarization-doped source and drain region (InN-Hetero-TG-TFET) is proposed and investigated by Silvaco-Atlas simulations for the first time. Compared with the conventional physical doping TFET devices, the proposed device can realize the P-type source and N-type drain region by means of the polarization effect near the top InN/InGaN and bottom InGaN/InN heterojunctions respectively, which could provide an effective solution of random dopant fluctuation (RDF) and the related problems about the high thermal budget and expensive annealing techniques due to ion-implantation physical doping. Besides, due to the hetero T-shaped gate, the improvement of the on-state performance can be achieved in the proposed device. The simulations of the device proposed here in this work show I_ON of 4.45×10^-5 A/μm, I_ON/I_OFF ratio of 10¹³, and SS_avg of 7.5 mV/dec in InN-Hetero-TG-TFET, which are better than the counterparts of the device with a homo T-shaped gate (InN-Homo-TG-TFET) and our reported lateral polarization-induced InN-based TFET (PI-InN-TFET). These results can provide useful reference for further developing the TFETs without physical doping process in low power electronics applications.     

A novel P-channel SOI LDMOS structure with non-depletion potential-clamped layer

A novel structure is proposed for doubling the vertical breakdown voltage of silicon-on-insulator(SOI) devices. In this new structure, the conventional buried oxide(BOX) in an SOI device is split into two sections: the source-section BOX and the drain-section BOX. A highly-doped Si layer, referred to as a non-depletion potential-clamped layer(NPCL), is positioned under and close to the two BOX sections. In the split BOXes and the Si region above the BOXes, the blocking voltage(BV) is divided into two parts by the NPCL. The voltage in the NPCL is clamped to be nearly half of the drain voltage. When the drain voltage approaches a breakdown value, the voltage sustained by the source-section BOX and the Si region under the source are nearly the same as the voltage sustained by the drain-section BOX and the Si region under the drain. The vertical BV is therefore almost doubled. The effectiveness of this new structure was verified for a P-channel SOI lateral double-diffused metal-oxide semiconductor(LDMOS) and can be applied to other high-voltage SOI devices. The simulation results show that the BV in an NPCL P-channel SOI LDMOS is improved by 55% and the specific on-resistance(Ron,sp) is reduced by 69% in comparison to the conventional structure.     

A technique for simultaneously improving the product of cutoff frequency–breakdown voltage and thermal stability of SOI SiGe HBT

The product of the cutoff frequency and breakdown voltage( fT×BVCEO) is an important figure of merit(FOM) to characterize overall performance of heterojunction bipolar transistor(HBT). In this paper, an approach to introducing a thin N+-buried layer into N collector region in silicon-on-insulator(SOI) Si Ge HBT to simultaneously improve the FOM of fT×BVCEOand thermal stability is presented by using two-dimensional(2D) numerical simulation through SILVACO device simulator. Firstly, in order to show some disadvantages of the introduction of SOI structure, the effects of SOI insulation layer thickness(TBOX) on fT, BVCEO, and the FOM of fT×BVCEOare presented. The introduction of SOI structure remarkably reduces the electron concentration in collector region near SOI substrate insulation layer, obviously reduces fT, slightly increases BVCEOto some extent, but ultimately degrades the FOM of fT×BVCEO. Although the fT,BVCEO, and the FOM of fT×BVCEOcan be improved by increasing SOI insulator Si O_2 layer thickness TBOXin SOI structure, the device temperature and collector current are increased due to lower thermal conductivity of Si O_2 layer, as a result, the self-heating effect of the device is enhanced, and the thermal stability of the device is degraded. Secondly, in order to alleviate the foregoing problem of low electron concentration in collector region near SOI insulation layer and the thermal stability resulting from thick TBOX, a thin N+-buried layer is introduced into collector region to not only improve the FOM of fT×BVCEO, but also weaken the self-heating effect of the device, thus improving the thermal stability of the device. Furthermore, the effect of the location of the thin N+-buried layer in collector region is investigated in detail. The result show that the FOM of fT×BVCEOis improved and the device temperature decreases as the N+-buried layer shifts toward SOI substrate insulation layer. The approach to introducing a thin N+-buried layer into collector region provides an effective method to improve SOI Si Ge HBT overall performance.     

Direct measurement and analysis of total ionizing dose effect on 130 nm PD SOI SRAM cell static noise margin

In this work, the total ionizing dose(TID) effect on 130 nm partially depleted(PD) silicon-on-insulator(SOI) static random access memory(SRAM) cell stability is measured. The SRAM cell test structure allowing direct measurement of the static noise margin(SNM) is specifically designed and irradiated by gamma-ray. Both data sides' SNM of 130 nm PD SOI SRAM cell are decreased by TID, which is different from the conclusion obtained in old generation devices that one data side's SNM is decreased and the other data side's SNM is increased. Moreover, measurement of SNM under different supply voltages(Vdd) reveals that SNM is more sensitive to TID under lower Vdd. The impact of TID on SNM under data retention Vddshould be tested, because Vddof SRAM cell under data retention mode is lower than normal Vdd.The mechanism under the above results is analyzed by measurement of I–V characteristics of SRAM cell transistors.     

Novel high-K with low specific on-resistance high voltage lateral double-diffused MOSFET

A novel voltage-withstand substrate with high-K (HK, k>3.9, k is the relative permittivity) dielectric and low specific on-resistance (R_on,sp) bulk-silicon, high-voltage LDMOS (HKLR LDMOS) is proposed in this paper. The high-K dielectric and highly doped interface N⁺-layer are made in bulk silicon to reduce the surface field drift region. The high-K dielectric can fully assist in depleting the drift region to increase the drift doping concentration (N_d) and reshape the electric field distribution. The highly doped N⁺-layer under the high-K dielectric acts as a low resistance path to reduce the R_on,sp. The new device with the high breakdown voltage (BV), the low R_on,sp, and the excellent figure of merit (FOM=BV²/R_on,sp) is obtained. The BV of HKLR LDMOS is 534 V, R_on,sp is 70.6 mΩ·cm², and FOM is 4.039 MW·cm^-2.     

Ultra-low on-resistance high voltage (>600 V) SOI MOSFET with a reduced cell pitch

A low specific on-resistance (R S,on) silicon-on-insulator (SOI) trench MOSFET (metal-oxide-semiconductor-field-effect-transistor) with a reduced cell pitch is proposed.The lateral MOSFET features multiple trenches:two oxide trenches in the drift region and a trench gate extended to the buried oxide (BOX) (SOI MT MOSFET).Firstly,the oxide trenches increase the average electric field strength along the x direction due to lower permittivity of oxide compared with that of Si;secondly,the oxide trenches cause multiple-directional depletion,which improves the electric field distribution and enhances the reduced surface field (RESURF) effect in the SOI layer.Both of them result in a high breakdown voltage (BV).Thirdly,the oxide trenches cause the drift region to be folded in the vertical direction,leading to a shortened cell pitch and a reduced R S,on.Fourthly,the trench gate extended to the BOX further reduces R S,on,owing to the electron accumulation layer.The BV of the MT MOSFET increases from 309 V for a conventional SOI lateral double diffused metal-oxide semiconductor (LDMOS) to 632 V at the same half cell pitch of 21.5 μm,and R S,on decreases from 419 m · cm 2 to 36.6 m · cm 2.The proposed structure can also help to dramatically reduce the cell pitch at the same breakdown voltage.     

A novel LDMOS with a junction field plate and a partial N-buried layer

A novel lateral double-diffused metal–oxide semiconductor (LDMOS) with a high breakdown voltage (BV) and low specific on-resistance (R_on.sp) is proposed and investigated by simulation. It features a junction field plate (JFP) over the drift region and a partial N-buried layer (PNB) in the P-substrate. The JFP not only smoothes the surface electric field (E-field), but also brings in charge compensation between the JFP and the N-drift region, which increases the doping concentration of the N-drift region. The PNB reshapes the equipotential contours, and thus reduces the E-field peak on the drain side and increases that on the source side. Moreover, the PNB extends the depletion width in the substrate by introducing an additional vertical diode, resulting in a significant improvement on the vertical BV. Compared with the conventional LDMOS with the same dimensional parameters, the novel LDMOS has an increase in BV value by 67.4%, and a reduction in R_on.sp by 45.7% simultaneously.