Parameter optimization and structural design of polymer arrayed waveguide grating multiplexer

First some important parameters are optimized for the structural design of a polymer arrayed waveguide grating (AWG) multiplexer around the central wavelength of 1.55 μm with the wavelength spacing of 1.6 nm. These parameters include the thickness and width of the guide core, mode effective refractive indices and group refractive index, diffraction order, pitch of adjacent waveguides, length difference of adjacent arrayed waveguides, focal length of slab waveguides, free spectral range (FSR), the number of input/output (I/O) channels, and that of arrayed waveguides. Then the bent angles, radii and lengths of all the input/output channels and arrayed waveguides are determined. Finally, a schematic waveguide layout of this device is presented, which contains 2 slabs, 11 input channels, 11 output channels, and 91 arrayed waveguides.     

减少聚合物阵列波导光栅损耗的蒸气回溶技术

阵列波导光栅(AWG)器件是波分复用(WDM)系统的一种关键器件,其中,聚合物阵列波导光栅由于其制备工艺、器件集成等方面的优势而受到人们的日益关注。侧壁散射损耗是聚合物阵列波导光栅损耗的一个主要因素,减少阵列波导光栅波导的侧壁损耗对制备低损耗阵列波导光栅具有重要意义。一种蒸气回溶技术被用来有效地减少硅基聚合物阵列波导光栅的散射损耗,该技术的机理是饱和溶剂分子融入并软化波导侧壁,增加其流动性,从而降低波导侧壁粗糙度。用扫描电镜方法验证了用该技术能获得更光滑的波导侧壁。对直波导和阵列波导光栅样品进行回溶处理,测试后得到直波导的侧壁散射损耗减少2.1 dB/cm,阵列波导光栅中心信道和周边信道的插入损耗分别减少5.5 dB和6.7 dB,串扰减少2.5 dB。     

A novel wavelength dispersive device with a dispersive element based on staircase-like straight and parallel arrayed waveguides

We propose a new type of arrayed waveguide grating (AWG) multiplexer/demultiplexer based on modified group refractive index. This device is composed by an array of straight and parallel waveguides of equal length and each waveguide consist of two sections with different width. The length of the two sections are changed from a waveguide to the adjacent one following a linear dependence resulting in a wavelength dispersive waveguide array. An example of the device design for silicon-on-insulator (SOI) platform is provided and numerical simulations have been carried out for various arrayed waveguide parameters. We demonstrate that the group index modification can be used for tailoring device dispersion properties, and that it can also result in new dispersion characteristics predicted numerically not observed in conventional AWGs. Additional advantages are that the demultiplexer does not necessarily require bending waveguide sections as in a conventional AWG (de)multiplexers, and thus yields highly compact devices with potentially very low insertion loss. Channel spacing of 1 nm have been predicted for sub-micron waveguides sizes. In this paper it is also proposed a novel wavefront converter based on waveguide array lens-like element with waveguides broadened sections. Numerical results for different input/output geometries are analized.     

Polymeric 32-channel arrayed waveguide grating multiplexer using fluorinated poly (ether ether ketone)

In wavelength division multiplexing (WDM) systems, an arrayed waveguide grating (AWG) multiplexer is a key component. A polymeric AWG multiplexer has recently attracted much attention due to its low cost processing and a potential of integration with other devices. Fluorinated poly (ether ether ketone)(FPEEK) is excellent material for fabrication of optical waveguides due to its low absorption loss at 1.55-μm wavelength and high thermal stability. A 32-channel AWG multiplexer has been designed based on the grating diffraction theory and fabricated using newly synthesized FPEEK. During the fabrication process of the Polymer/Si AWG device, spin coating, vaporizing, photolithographic patterning and reactive ion etching (RIE) are used. The AWG multiplexer measurement system is based on a tunable semiconductor laser, infrared camera and a Peltier-type heater. The device exhibits a wavelength channel spacing of 0.8nm and a center wavelength of 1548 nm in the room temperature.     

AWG中波导间耦合造成的相位畸变的分析

用(1,1)阶Pad啨近似的广角BPM计算了阵列波导光栅(AWG)中由于阵列波导间耦合造成的相位畸变以及由于相位畸变引起的相位误差分别考虑了光从中心/非中心输入波导入射两种情况结果表明,波导间的耦合会造成显著的相位畸变,但由此引起的相位误差却很小,光从中心输入波导入射时对应的相位误差10-3rad,从非中心输入波导入射时的相位误差约为10-2rad针对波导阵列边缘效应引起的相位畸变,设计AWG结构时,在阵列部分两侧增加了边缘辅助波导结构,从而消除了边缘效应,使得边缘阵列波导对应的相位误差从10-1rad量级减小为10-3(10-2)rad量级.     

Design and fabrication of wavelength tunable AWGs based on the thermo-optic effect

In this Letter, a 16 channel 200 GHz wavelength tunable arrayed waveguide grating(AWG) is designed and fabricated based on the silicon on insulator platform. Considering that the performance of the AWG, such as central wavelength and crosstalk, is sensitive to the dimension variation of waveguides, the error analysis of the AWG with width fluctuations is worked out using the transfer function method. A heater is designed to realize the wavelength tunability of the AWG based on the thermo-optic effect of silicon. The measured results show that the insertion loss of the AWG is about 6 d B, and the crosstalk is 7.5 d B. The wavelength tunability of 1.1 nm is achieved at 276 m W power consumption, and more wavelength shifts will gain at larger power consumption.     

聚合物阵列波导光栅复用器关键技术的研究

介绍了阵列波导光栅(AWG)复用器的工作原理;运用光栅衍射理论和马卡提里近似法,对中心波长为1.55 μm,波长间隔为1.6 nm的聚合物AWG进行参量设计,通过数值模拟验证了设计的正确性.用甲基丙烯酸甲酯类聚合物对AWG的制备工艺进行了研究,用铝作掩模制作了聚合物光波导,测试结果表明在1.55 μm处波导实现单模传输.     

InP阵列波导光栅的误差分析

在InP阵列波导光栅的制作过程中会引入不同的误差,从而影响器件的性能.为了最大限度地控制误差,提高半导体器件性能,本文采用传输函数法对InP基阵列波导光栅的系统误差和随机误差分别进行了分析.从系统误差的模拟结果中可以得到如下结论:深脊型波导的有效折射率n_c平均每偏移+0.000 1,中心波长偏移+0.05nm.相邻阵列波导长度差ΔL每偏移+0.01 μm,中心波长将偏移+0.44 nm.n_c和ΔL仅仅会影响到传输谱中心通道及其他各通道对应的波长,使得传输谱发生整体漂移,而信道间隔及串扰不会改变.罗兰圆半径R偏移不会影响器件的中心通道对应的波长,但会使其它通道对应的波长发生变化,最终使得信道间隔改变,R增加50 μm,信道间隔减小0.03 nm.从随机误差模拟结果中,得出:波导芯区折射率、上包层折射率、衬底折射率、波导宽度和波导芯层厚度的随机波动会对阵列波导光栅的串扰产生较大的影响.根据以上分析,可以通过控制不同参量来调节器件的中心波长以及信道间隔等来优化阵列波导光栅的光学性能.     

A concise design of 16 × 16 polymer AWG with low insertion loss and crosstalk

In this paper, a 16-channel arrayed waveguide grating multiplexer (AWG) has been designed using polymer materials with 1.5% refractive index difference. Certain important parameters are optimized using the coupling mode theory and Beam Propagation Method. The factors that affect the insertion loss and the crosstalk are analyzed in this paper. In our design we introduced the parabolic taper structure and evaluated the suitable number of the arrayed waveguide, obtaining a total insertion loss of 2.19 dB. For obtaining a low crosstalk we evaluate the pitches of adjacent input/output waveguides ΔX and arrayed waveguides d as different values. We chose the value of ΔX about 2.5 times of d by enlarging the pitches of adjacent input/output waveguides. The crosstalk of the designed AWG is lower than −40 dB.     

Three-dimensional hybrid modeling based on a beam propagation method and a diffraction formula for an AWG demultiplexer

An efficient and accurate three-dimensional (3D) hybrid modeling, which combines a 3D beam propagation method (BPM) and the two-dimensional (2D) Kirchhoff–Huygens diffraction formula, is developed to simulate the field propagation in an arrayed waveguide grating (AWG) demultiplexer. The 2D Kirchhoff–Huygens diffraction formula is used for the simulation of the light propagation in the free propagation regions (FPRs). A 3D BPM in a polar coordinate system is used to simulate the light propagation in the transition region between the input FPR and the arrayed waveguides so that the coupling coefficients for the arrayed waveguides are calculated conveniently and accurately. For the simulation in the transition region between the arrayed waveguides and the output FPR, only the central arrayed waveguide and several adjacent ones are needed in the computational window of a standard BPM and thus the computation efficiency is improved. Finally, a flat-top AWG is designed and fabricated to verify the reliability of the present simulation method. The calculated and measured spectral responses are in a good agreement.     

An Efficient Technique for Analyzing Transmission Characteristics of Arrayed Waveguide Grating Multiplexers

An efficient technique is presented for analyzing transmission characteristics of arrayed waveguide grating (AWG) multiplexers. As an example, calculations using this technique are performed for a polymer 33 × 33 AWG multiplexer around the central wavelength of 1.55 m with the wavelength spacing of 0.8 nm. Computed results show that this technique possesses high accuracy for analyzing the power profile, diffraction efficiency, transmission spectrum, free spectral range and crosstalk of the AWG multiplexer.     

Athermal silicon arrayed waveguide grating with polymer-filled slot structure

In this paper, an athermal silicon arrayed waveguide grating (AWG) with the assistance of a polymer-filled slot structure is proposed. Arrayed slot waveguides were used to replace arrayed silicon photonic wires (SPWs). By carefully controlling the temperature dependence of the effective index of the polymer-filled slot waveguides, the athermal silicon AWG is realized. Analysis shows that the center wavelength shift of the AWG can be down to 0.14 pm/°C.     

平场输入/输出蚀刻衍射光栅的设计

光通信中波分复用技术是解决通信网络瓶颈的有效手段，近年来得到很大发展。以平面波导波分复用器件为核心的密集波分复用技术已经得到成功商用。蚀刻衍射光栅是平面波导密集波分复用器件中很有发展潜力的一种。原有蚀刻衍射光栅采用罗兰圆设计，输入输出在圆弧曲线上由条形波导引出；而平场输入／输出的蚀刻衍射光栅在很多应用中可以省去制作输入输出波导，大大简化制作工艺，同时能够保持良好的线性色散和聚集效果。给出了平场输入和输出蚀刻衍射光栅的设计方法，并利用标量衍射理论对设计的结果进行模拟，验证了平场输出蚀刻衍射光栅具有很好的分波效果。     

低插入损耗阵列波导光栅的设计

研究了阵列波导光栅的插入损耗.针对损耗来源,讨论了各项损耗的研究方法.分析了结构参量对损耗的影响,讨论了降低损耗的设计思路.对结构参量进行优化,设计了8通道200 GHz间隔的阵列波导光栅,中心通道插入损耗为1.37 dB,低于目前商用器件的1/2.对阵列波导光栅的设计具有一定的指导意义.     

Temperature dependence of low loss polymeric AWG

We investigate on the variation of loss and temperature dependence of a polymeric arrayed waveguide grating (AWG) depending on its substrate, by fabricating 16-channel polymeric AWGs with various substrate conditions. Insertion loss for a polymeric AWG on a silicon substrate is measured as low as 3.1 dB. The temperature-dependent wavelength shift for a polymeric AWG detached from the substrate is maintained within 0.1 nm from 20 to 80 °C. But we observe a degradation of insertion loss and a little instability in wavelength characteristics both for the detached polymeric AWG and for a polymeric AWG on a polymer substrate. We investigate on those optical properties of the polymeric AWGs based on measured thermal expansion properties of the polymers.     

Limiting efficiencies of second-harmonic generation and cascaded χ processes in quadratically nonlinear photonic nanowires

Quadratically nonlinear waveguides with subwavelength core dimensions are shown to provide limiting efficiencies of second-harmonic generation and three-wave mixing, as well as cascaded χ⁽²⁾ nonlinear-optical interactions. Small-core waveguides made of high-χ⁽²⁾ materials, such as gallium arsenide and indium phosphide, are shown to allow anomalous dispersion to be achieved within the range of wavelengths from 1.3 to 2.0 μm, with the wavelength of zero group-velocity dispersion controlled by the size of the waveguide core.     

Design and fabrication of arrayed waveguide grating using fluoropolymer PFS-co-GMA

A 33×33 polymer arrayed waveguide grating (AWG) multiplexer is optimized and fabricated. This device is made of polymeric materials named 2,3,4,5,6-pentafluorostyrene-co-glycidylmethacrylate (PFS-co-GMA). The central wavelength and wavelength spacing are designed to be 1550.918 and 0.8 nm, respectively. The calculated results are: the 3-dB bandwidth is about 0.24 nm, insertion loss is about 8.4 dB and crosstalk is −33.7 dB. The corresponding measured results are: the center wavelength is about 1550.85 nm, wavelength channel spacing is about 0.81 nm, 3-dB bandwidth is about 0.35 nm, crosstalk is about −20 dB, insertion loss is between 10.4 dB for the central port and 11.9 dB for the edge ports.     

小尺寸低折射率差硅基二氧化硅阵列波导光栅

随着AWG型器件在光通信系统中的大规模应用,对低成本AWG芯片的需求越来越多。在各种降成本方案中,减小AWG芯片的尺寸是最有效的方法之一。本文介绍了一种新型小尺寸低折射率差硅基二氧化硅阵列波导光栅（AWG）的设计。在该AWG中,输入波导/输出波导与平板波导连接的部分制作成两侧为空气槽的高折射率差波导,所以在与输出平板波导连接处的相邻输出波导间距较小,这样可以在设计上缩短平板波导的长度、减少阵列波导的数量,实现较小的AWG芯片尺寸。该AWG的其它部分,如输入/输出波导与光纤耦合的部分、阵列波导光栅等均采用常规的低折射率波导工艺,所以就同时具有与常规的低折射率波导AWG相同的优点：如低耦合损耗、较好的串扰以及光学特性等。根据这个原理,设计了一种40通道100 GHz频率间隔的低折射率差硅基二氧化硅AWG,其芯片尺寸只有23.88 mm?10.5 mm,是传统相同材料制作的AWG尺寸的1/6。     

阵列波导光栅线性系统理论分析及优化设计

运用线性系统理论分析了阵列波导光栅的模场特性 ,导出器件传输的数学模型即光栅方程。提出了设计阵列波导光栅阵列波导数M的新方法 ,该方法综合考虑了降低器件串扰以及收集发散光场的能力 ,与文献 [1 ]的方法相比简单且准确。分析了造成器件衍射损耗的原因 ,提出了降低器件衍射损耗的方法。给出了 8× 0 .8nm ,中心波长为 1 550nm的阵列波导光栅波分复用器的设计实例 ,并进行了数值模拟计算验证了文中所提方法的准确性。