一种内置法布里-珀罗标准具选择He-Ne激光器内谱线的方法

He-Ne激光器中633 nm波长的增益远大于该波段其它5条谱线的增益,而且由于模式竞争的影响,通常情况下增益较低的相邻弱线(如629 nm波长)很难出光.提出一种在He-Ne激光器中加入法布里-珀罗(F-P)标准具来选择输出谱线的方法.通过选择适当的F-P标准具长度和反射率,可以达到抑制强线增益,使弱线振荡输出的目的.还采用高斯光束传输理论对谐振腔内F-P标准具的透射特性进行了仿真计算.     

Hg(577nm、579nm)塞曼效应分析

本文对Hg的577 nm、579 nm谱线的塞曼效应进行了理论分析和实验验证,通过对F-P标准具分辨率的讨论.证明实验现象与理论分析是一致的.定量计算了分裂谱线的波数差.     

基于复合波长参考的温度稳定光纤光栅传感解调研究

为实现温度稳定的光纤光栅传感解调,提出了综合使用法布里-珀罗(F-P)标准具和乙炔气室进行实时复合波长参考的校正方法。分析了F-P标准具透射光谱和乙炔气室吸收光谱的温度漂移特性。建立实验系统,测试了F-P标准具透射光谱的温度漂移特性,实验显示F-P标准具谱线平均温度灵敏度为1.16 pm/℃,谱线温度重复性误差可达13.0 pm。进行了基于F-P标准具单独参考和基于复合波长参考的解调温度稳定性实验,实验结果表明0℃~55℃的高低温循环,基于F-P标准具单独参考的解调值变化范围为±32.7 pm,标准差为20.7 pm,基于复合波长参考的解调值变化范围为±1.2 pm,标准差为0.39 pm,解调值变化范围温度稳定性提高了27倍。     

小型可调谐单纵模TEA CO2激光器

对在三镜腔中插入法布里-珀罗(F-P)标准具实现单纵模激光输出的方法进行了分析,计算了激光器的输出特性。设计研制了一台单纵模可调谐TEA CO2激光器。采用在三镜腔中插入F-P标准具的方法实现了单纵模激光的调谐输出。当激光器以5 Hz重复频率运转时,得到9P(16)谱线能量大于200 mJ,脉冲宽度约为150 ns。     

基于F-P标准具的固体激光可调线宽控制技术

钠导星激光研制需激光线宽在一定范围内可调节。开展了F-P标准具压窄线宽数值模拟,设计一台高光束质量基横模线偏振激光输出全固态1064 nm激光器作为实验装置,结合激光器输出光谱特性进行计算。根据计算结果采用不同规格的单标准具、组合双标准具实现了激光线宽在0.75 ~2.83 GHz范围内的离散调节控制。在标准具未控温情况下,不同线宽时激光中心波长保持1064.58 nm,30 min内波长漂移量小于3 pm。     

400 Hz全固态和频钠导星激光器

报道了一台重复频率400 Hz、平均功率1.52 W的二极管抽运全固态钠导星激光器.利用两路声光调Q的1064 nm与1319 nm激光作为基频光,并采用主从电源模式以及电子学延迟补偿技术实现两个调Q脉冲的时间同步,然后在腔外通过一块LBO晶体和频产生了589 nm钠导星激光,和频效率约达25.1%,系统电光效率0.32%.为了实现中心波长与钠D2a线的锁定,在1064 nm激光器内插入一块标准具,并采用水冷控温,通过调节控制标准具的倾斜角度和温度,最终将中心波长对准至589.159 nm,并且偏差小于±1 pm.     

用激光空腔锁定技术测量材料的拉,压弹性模量的相对误差

将一激光器的工作频率锁定在Fabry-Perot标准具(简称F-P)的共振峰上,利用F-P标准具光学共振频率随腔长的灵敏响应特性,用光学拍频方法测得F一P腔体材料在微小应力作用下的应变值,就可得到材料的弹性模量.本文就此提出了测量材料拉、压弹性模量相对误差的一种方法,并且实测了石英材料拉、压弹性模量的相对误差     

脉冲单纵模激光器中标准具精度与选模性能

根据脉冲单纵模激光器中的关键器件F-P标准具的选模原理,定量分析了不同参数F-P标准具的加工厚度精度、角度放置精度以及腔长变化对激光器纵模选择性能产生的影响,得到了对不同参数标准具的光学厚度偏差进行补偿所需的角度偏移量,研究了入射角度对标准具中心波长偏移的影响。这些结果对于脉冲单纵模激光器的机械结构设计、器件加工允差与装配调节精度的设计具有重要意义。在线型腔F-P标准具选模激光器中,得到了最大单脉冲能量8.41 J,脉冲宽度32 ns,近衍射极限的单纵模激光脉冲输出。     

光纤光栅F-P标准具选模单频环形腔光纤激光器

 讨论了光纤光栅法布里-珀罗(F-P)标准具选模光纤激光器的单频运转原理，并研制了全光纤结构单频掺Er³⁺光纤环形激光器。实验中采用两个976 nm激光二极管双向泵浦作为泵浦源，高掺杂浓度掺Er³⁺光纤作为增益介质，以行波腔消除空间烧孔效应，利用光纤光栅F-P标准具窄带选模特性，当泵浦光功率为36 mW时，得到了稳定的单频激光输出。实验中使用了长5和3 m的掺杂光纤，在泵浦光功率为145 mW时输出功率分别为19和42 mW，光-光转换效率分别为13%和29%，斜率效率分别达到了16%和33%。输出谱线3 dB带宽0.01 nm，无跳模现象。     

基于单法布里-珀罗标准具的双频率四边缘鉴频光电探测技术

提出了一种基于单固体法布里-珀罗(F-P)标准具和可调谐半导体激光器的高精度鉴频新技术双频率四边缘技术。导出了F-P标准具反射谱和透射谱函数表达式,分析了双频率四边缘技术的鉴频原理;根据鉴频原理,给出了鉴频系统结构及相应的探测信号分析处理方法;进一步分析了噪声引起的测量误差,导出了具体的误差公式;与传统的基于F-P标准具双边缘鉴频技术的探测性能做了对比分析。结果表明,该技术通过对F-P标准具的透射和反射信号同时探测,鉴频精度将提高2.82~3.03倍,而且由于采用的是单固体F-P标准具,光路简单且系统成本低。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.