Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P

Since the tapered quarter wave resonator (QWR) cavity is proven to have a much lower peak surface magnetic field in the short plate and a lower peak surface electric field near the beam tube compared with the straight outer conductor QWR, it has been recommended for the separated sector cyclotron linac injector system in the heavy ion research facility in Lanzhou. This paper is focused on the multipacting (MP) analysis for the tapered QWR with a frequency of 80.5 MHz and beta of 0.085. Using the Analyst program, MP bands can be simulated and analyzed with the Particle Tracking module to identify potential problems in the cavity design. This paper will present the simulation results of MP for the tapered QWR cavity.     

325 MHz spoke腔的二次电子倍增效应

采用CST软件的粒子工作室模块, 对spoke超导腔中可能发生的二次电子倍增效应进行了分析研究,并采用二次电子倍增效应发生后形成稳定状态时的粒子数增长率来表征其强度。模拟计算表明:该腔存在两处二次电子倍增效应,spoke柱两端的两点一阶倍增; spoke腔两端侧壁与中心圆筒交界处的单点一阶倍增;二次电子倍增在加速腔压为0.65 MV时的增长率最高,而腔压大于1 MV时,增长率均为负,即无倍增发生。     

Study of multipacting effect in sub-harmonic buncher of SSRF linac

During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. However, unexpected multipacting effect prevents the increase of the input power when the magnetic field of focusing coils is added after adequate conditioning and a novel method is adopted to suppress it by introducing extra coils to counteract the field. This paper focuses on the simulation of multipacting effect in different magnetic field configurations. The experimental observations and simulation results of multipacting effect are presented and details of the multipacting process are also analyzed.     

Study of multipacting effect in sub-harmonic buncher of SSRF linac

During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. However, unexpected multipacting effect prevents the increase of the input power when the magnetic field of focusing coils is added after adequate conditioning and a novel method is adopted to suppress it by introducing extra coils to counteract the field. This paper focuses on the simulation of multipacting effect in different magnetic field configurations. The experimental observations and simulation results of multipacting effect are presented and details of the multipacting process are also analyzed.     

Study of medium beta elliptical cavities for CADS

The China Accelerator-Driven Sub-critical System(CADS) is a high intensity proton facility to dispose of nuclear waste and generate electric power.CADS is based on a 1.5 GeV,10 mA CW superconducting(SC) linac as a driver.The high energy section of the linac is composed of two families of SC elliptical cavities which are designed with geometrical beta 0.63 and 0.82.In this paper,the 650 MHz β=0.63 SC elliptical cavity is studied,including cavity optimization,multipacting,high order modes(HOMs) and generator RF power calculation.     

CSNS-II超导椭球腔形变电场平坦度仿真分析

超导椭球腔是一种通过冲压零件和电子束焊接而成型的薄壁结构,在加工过程中存在不可避免的形变,如单元倾斜、偏轴,单元长度偏差,从而影响椭球腔的轴向电场平坦度,进而降低椭球腔的运行电场梯度。因此,在椭球腔加工成型后要进行预调谐处理。椭球腔预调谐是通过对椭球腔整形,包括倾斜和偏轴矫正,单元长度矫正,以达到提高轴向电场平坦度的目的。采用COMSOL多物理场耦合软件对CSNS-II（China Spallation Neutron Source Phase II）超导椭球腔可能存在的形变进行了仿真计算,研究了各单元形变量对电场平坦度的影响,分析了腔体调谐位移量对电场平坦度的影响,为椭球腔预调谐提供数据参考,也为预调谐机的设计研制提供指导。另外,确定了椭球腔机械形变的要求,确保椭球腔机械加工质量满足CSNS-II升级的实际工程需求。     

Researches and Preliminary Experiments on Copper-Niobium Sputtered Low-β Superconducting Resonator

Superconducting resonator is the important component of a superconducting accelerator. The best choice of the acceleration cavity for heavy ion superconducting accelerator is quarter wave resonator (QWR). By sputtering a layer of niobium films of several microns on the OFHC copper substrate, good superconducting properties and acceleration properties of the cavity can be obtained. However, it is very difficult to get uniform niobium films by sputtering because the inner surface of the QWR is complicated. To deal with this problem, we developed a multiparameter adjusting method to control the sputtering process of different parts of the QWR. A layer of uniform niobium film with nice superconducting performance is obtained. The low temperature experiments with liquid helium show that the Cu Nb QWR has good superconducting characters. The Q value of the cavity is about 5×10⁸.     

新型二次电子倍增阴极的蒙特卡罗模拟研究

提出了一种新型二次电子倍增阴极强流二极管,并对其进行了动力学理论简化模型和蒙特卡罗数值模拟的对比验证研究。首先,基于设计结构原型,根据二次电子发射特性进行合理简化,建立了动力学模型,获得了电子速度、位移以及渡越时间的解析结果,并结合Vaughan的二次电子产额模型,确定了该新型二次电子倍增阴极强流二极管的理论工作区间;其次,理论分析了施加径向电场的重要意义,并给出了二次电子运动特征参数(最大位移、渡越时间、碰撞能量等)的理论预估结果;最后,对该新型二次电子倍增阴极强流二极管进行了蒙特卡罗模拟研究,获得了电子的运动轨迹、碰撞能量以及二次电子倍增工作区间等物理图像,并将蒙特卡罗数值模拟结果与理论结果进行了比对,两者吻合程度较好,对可能的误差来源进行了分析讨论。理论和模拟结果表明:新型二次电子倍增阴极强流二极管概念可行,工作区间内通过调整施加电场与磁场幅值,可有效达到电子运动状态可控的目标。另外,理论粗估了二次电子倍增饱和条件下的阴极发射电流密度,结果表明:发射电流密度可达kA/cm2水平,具备强流发射特性;增加外加径向场强幅值可有效提升发射电流密度。最后,对该新型二次电子倍增阴极设计步骤和依据进行了讨论。     

Development of fundamental power coupler for C-ADS superconducting elliptical cavities

5-cell elliptical cavities have been selected for the main linac of the China Accelerator Driven subcritical System(C-ADS) in the medium energy section. According to the design, each cavity should be driven with radio frequency(RF) energy up to 150 kW by a fundamental power coupler(FPC). As the cavities work with high quality factor and high accelerating gradient, the coupler should keep the cavity from contamination in the assembly procedure. To fulfil the requirements, a single-window coaxial type coupler was designed with the capabilities of handling high RF power, class 10 clean room assembly, and heat load control. This paper presents the coupler design and gives details of RF design, heat load optimization and thermal analysis as well as multipacting simulations. In addition, a primary high power test has been performed and is described in this paper.     

Multipacting phenomenon at high electric fields of superconducting cavities

Recently multipacting (MP) recalculation of the TeV Energy Superconducting Linear Accelerator (TESLA) resonator was performed. In addition to the normal MP which occurs at a peak electric field of around 40MV/m for the TESLA cavity, another type of multipacting with resonant electron trajectory that is far from the equator is also seen.It occurs at a gradient around 60MV/m to 70MV/m. This result seems to explain some experimental observations.     

First room temperature lasing from the fundamental state of V-grooved quantum wire lasers

Lasing from the ground state electron and heavy-hole-like transition of quantum wire (QWR) is demonstrated for the first time at room temperature, with an oxide-isolated V-grooved GaAs/AlGaAs triple QWR laser grown by flow-rate modulation epitaxy (FME). The lasing peaks at all temperatures (4–300 K) are in reasonably good agreement with both the photon energies of the peaks of the photoluminescence curves and the numerical calculation of the electronic sub-band energy states of the corresponding QWR structure. These results are considered to be responsible for the reduced heterointerface inhomogeneities (the Stokes shift 0.3 meV) of the FME grown QWR, giving a low-loss wave guide in the QWR laser.     

低β四分之一波长腔中的束流偏转的分析性研究(英文)

目前加速速度范围在0.01 c—0.3 c 的粒子的超导腔主要使用四分之一波长腔型。用于不同加速器上的频率范围在50—240 MHz 的四分之一波长腔在建造或者预研中。这种腔型的一个不足是其横向电磁成分会造成束流偏转效应,从而导致发射度的增长和束流的溢漏, 在强流重离子加速器中这种效应尤为严重。对中国科学院近代物理研究所超导直线加速器中的频率为80.5和161 MHz的四分之一波长腔的偏转效应进行了分析,计算结果表明,在四分之一腔体的设计时需要考虑到束流偏转的修正, 这通常需要在漂移管端面上削适当大小的倾角来实现。Superconducting(SC) cavities currently used for acceleration of ions in the velocity range from 0.01 cto 0.3 c are based frequently on quarter wave resonators(QWR). Various types of QWR cavities across a frequency extent from 50 to 240 MHz have been constructed or are proposed for numerous applications. A drawback of this kind of cavities is the beam steering caused by transverse magnetic and electric field components, which can creat emittance growth. In this paper, the analytical studies on beam steering in quarter wave resonator of frequency=80.5 and 161 MHz of the SC linac has been done in Institute of Modern Physics, Chinese Academy of Sciences, the calculated results have told us that the correction for beam deflection should be a consideration during the design of the QWR cavity, which generally involves the shaping the inner drift tube.     

Mobility limited by cluster scattering in ternary alloy quantum wires

The mobility limited by cluster scattering in ternary alloy semiconductor quantum wire(QWR) is theoretically investigated under Born approximation. We calculate the screened mobility due to clusters(high indium composition InGaN) scattering in the InxGa1 xN QWR structure. The characteristics of the cluster scattering mechanism are discussed in terms of the indium composition of clusters, the one-dimensional electron gas(1DEG) concentration, and the radius of QWR. We find that the density, breadth of cluster, and the correlation length have a strong effect on the electron mobility due to cluster scattering. Finally, a comparison of the cluster scattering is made with the alloy-disorder scattering. It is found that the cluster scattering acts as a significant scattering event to impact the resultant electron mobility in ternary alloy QWR.     

The design of a five-cell high-current superconducting cavity

Energy recovery linacs are promising for achieving high average current with superior beam quality. The key component for accelerating such high-current beams is the superconducting radio-frequency cavity. The design of a 1.3 GHz five-cell high-current superconducting cavity has been carried out under cooperation between Peking University and the Argonne National Laboratory. The radio-frequency properties, damping of the higher order modes, multipacting and mechanical features of this cavity have been discussed and the final design is presented.     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

RF thermal and new cold part design studies on a TTF-Ⅲ input coupler for Project-X

An RF power coupler is one of the key components in a superconducting (SC) linac. It provides RF power to the SC cavity and interconnects different temperature layers (1.8 K, 4.2 K, 70 K and 300 K). The TTF-Ⅲ coupler is one of the most promising candidates for the High Energy (HE) linac of Project X, but it cannot meet the average power requirements because of the relatively high temperature rise on the warm inner conductor, so some design modifications will be required. In this paper, we describe our simulation studies on the copper coating thickness on the warm inner conductor with RRR values of 10 and 100. Our purpose is to rebalance the dynamic and static loads, and finally lower the temperature rise along the warm inner conductor. In addition, to get stronger coupling, better power handling and less multipacting probability, one new cold part design was proposed using a 60 mm coaxial line; the corresponding multipacting simulation studies have also been investigated.     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

质子束团传输过程中的二次电子多级倍增

电子云不稳定性是强流质子加速器稳定运行的一个重大障碍。在电子云积累的过程中,二次电子多级倍增是电子云的主要来源。二次电子多级倍增机制可以用电子的运动和能量增益来分析。为了得到电子云的密度及分布,编写了一个模拟程序用来跟踪电子云的发展演化过程。分析了在质子束团作用下电子的运动,分析二次电子多级倍增的原因,并用模拟程序进行了计算,结果发现电子云与束团的纵向分布密切相关。     

RF thermal and new cold part design studies on a TTF-Ⅲ input coupler for Project-X

An RF power coupler is one of the key components in a superconducting (SC) linac. It provides RF power to the SC cavity and interconnects different temperature layers (1.8 K, 4.2 K, 70 K and 300 K). The TTF-Ⅲ coupler is one of the most promising candidates for the High Energy (HE) linac of Project X, but it cannot meet the average power requirements because of the relatively high temperature rise on the warm inner conductor, so some design modifications will be required. In this paper, we describe our simulation studies on the copper coating thickness on the warm inner conductor with RRR values of 10 and 100. Our purpose is to rebalance the dynamic and static loads, and finally lower the temperature rise along the warm inner conductor. In addition, to get stronger coupling, better power handling and less multipacting probability, one new cold part design was proposed using a 60 mm coaxial line; the corresponding multipacting simulation studies have also been investigated.     

新型二次电子倍增阴极构型设计与动力学过程

提出了一种可由脉冲功率驱动的新型二次电子倍增阴极构型,并对其进行了动力学过程的初步理论研究。首先,针对该二次电子倍增阴极,建立了动力学模型,获得了二次电子的位移和速度方程,讨论了电子初始出射速度对其轨迹、渡越时间和碰撞能量的影响,理论给出了渡越时间和碰撞能量的近似解析表达式。其次,通过动力学方程与Vaughan二次电子产额经验公式的耦合求解,获得了该二次电子倍增阴极的工作区间,并对其进行了细致讨论。结果表明:该新型二次电子倍增阴极二极管概念上是可行的,在涂敷高二次电子产额系数材料的圆柱形介质上施加合适的轴向和径向静电场(MV/m量级)以及轴向静磁场(T量级),可以达到电子沿阴极表面螺旋行进过程中实现二次电子倍增并最终获得电流沿轴向放大的设计目标。另外,讨论了正电荷沉积引发的二次电子倍增饱和现象,并对阴极发射电流密度进行了理论粗估,结果表明:阴极发射电流密度可达kA/cm2水平,具备强流发射特性;增加外加径向场强幅值可有效提升阴极发射电流密度。