两种新型溶致型液晶芳香聚酯酰胺的合成与表征

从单体4,4′-对苯二甲酸酯基二苯甲酰氯制备开始,合成了三种可在N-甲基吡咯烷酮(NMP)中溶解且特性粘数较高的溶致液晶芳香聚酯酰胺。其中酰氯单体与4,4′-二氨基二苯甲烷反应生成的聚酯酰胺粘度较高,其NMP溶液25℃下的特性粘数可达1.7dl/g。这种聚酯酰胺具有交替的酯、酰胺基结构,其NMP溶液浓度为15%时在偏光显微镜下可观察到明显的液晶双折射,并且可以刮板成膜。     

光致变色液晶高分子研究（Ⅲ）：含胆甾介晶基元和偶氮苯…

用热台偏光显微镜、Ｘ射线衍射和ＤＳＣ研究了含胆甾介晶基元和偶氮苯光色基元侧链共聚硅氧烷（ＰＳＩ）的液晶性。将非介晶基元并入液晶均聚物，所得共聚物的液晶态类型不变，仍显示近晶型织，在ＰＳＩ共聚物中，保持液晶性的含介晶基元单体的最低极限组成为６０ｍｏｌ％．在液晶性存在的范围内，共聚物的清亮点由１３０℃升至１７０℃，液晶共聚物的热稳定性随非晶组分含量的增加而增强。     

含T-型和棒型两种液晶基元的主链型液晶共聚酯的合成和表征

以４，４′（α，ω 癸二酰氧）二苯甲酰氯，２ （４′ 乙氧基苯基）对苯二酚和联苯酚为单体，通过溶液缩聚反应，合成了一系列含Ｔ 型和棒型两种液晶基元的主链型芳族共聚酯．采用ＤＳＣ、偏光显微镜和Ｘ 射线衍射方法研究了共聚物的液晶行为，发现所有聚合物均有很好的热致液晶性且随聚合物中联苯酚用量的改变，共聚物的熔点（Ｔｍ）和液晶态清亮点（Ｔｉ）呈规律性变化．     

1,8-辛二酸改性热致液晶共聚酯的制备及其性能

以对羟基苯甲酸、对苯二甲酸和对苯二酚为共聚单体，经乙酰化和熔融缩聚两步法合成三元热致液晶共聚酯。引入长链脂肪族化合物1,8-辛二酸作为改性单体，按不同比例代替对苯二甲酸，制备了一系列含柔性链段的新型四元热致液晶共聚酯。通过傅里叶红外光谱(FT-IR)和核磁共振碳谱(¹³C-NMR)对共聚酯结构进行表征，采用差示扫描量热(DSC)和热失重分析(TGA)表征其热性能，采用偏光显微镜(POM)和X射线衍射(XRD)分析其液晶性能。研究表明，三元液晶共聚酯熔点达407℃，热稳定性优异。随着1,8-辛二酸含量增加，四元共聚酯熔点显著降至214℃，热稳定性较好，最大热分解温度达到428℃。该系列共聚酯显示了典型的向列型液晶织态结构。1,8-辛二酸的引入显著改善了液晶共聚酯的可加工性。     

光致变色液晶高分子研究（Ⅲ）──含胆甾介晶基元和偶氮苯光色基元侧链共聚硅氧烷的液晶行为

用热台偏光显微镜、Ｘ射线衍射和ＤＳＣ研究了含胆甾介晶基元和偶氮苯光色基元侧链共聚硅氧烷（ＰＳＩ）的液晶性．将非介晶基元并入液晶均聚物，所得共聚物的液晶态类型不变，仍显示近晶型织构，在ＰＳＩ共聚物中，保持液晶性的含介晶基元单体的最低极限组成为６０ｍｏｌ％．在液晶性存在的范围内，共聚物的清亮点由１３０℃升至１７０℃，液晶共聚物的热稳定性随非介晶组分含量的增加而增强．     

热致液晶性聚酯酰胺的研究进展

热致液晶性聚酯酰胺由于其独特的化学结构，形成了一新的液晶聚合物体系，本文就类热致性晶聚合物体系的研究进展作进行了述评。     

聚芳酯聚碳酸酯液晶共聚物的合成及表征

采用聚合物改性合成方法，以聚碳酸酯和对羟基苯甲酸苯酯（ＰＰＨＢ）为原料，克服了聚碳酸酯高温下易酸解脱羧的现象，合成了链结构为（ＯｐｈＣＯ）ｘ［ＯＰｈＣ（ＣＨ３）２ＰｈＯＣＯ］ｙ的液晶聚酯碳酸酯，并借助于ＤＳＣ，１Ｈ—ＮＭＲ，ＦＴＩＲ，ＴＧＡ，热台偏光显微镜和Ｘ光衍射等手段表征了其性能．结果表明，所合成的液晶聚酯碳酸酯具有较高的对数比浓粘度；当（ＯＰｈＣＯ）结构单元含量大于或等于５５ｍｏｌ％时，聚合物能呈现出向列型液晶行为；聚合物的Ｔｇ随着（ＯＰｈＣＯ）单元的增加而变大，并且聚合物拥有较好的溶解性能和热稳定性能     

一种基于联苯二甲酸为介晶基元的含磷液晶共聚酯的合成与表征

以联苯二甲酸二甲酯、二甘醇和9,10-二氢-9-氧杂-10磷酰杂菲-对苯二酚二羟乙基醚(DOPO-HQ-HE)为单体,通过无规共聚合成了一种新型含磷液晶共聚酯(PDEBP).用1H-NMR对共聚酯的结构进行了表征,用TGA、DSC和POM对其热性能及液晶行为进行了研究.结果表明,阻燃单体DOPO-HQ-HE的引入不会降低共聚酯的热稳定性,含7.5 mol％ DOPO-HQ-HE的共聚酯PDEBP7.5在700℃的氮气氛中的残余物(Wt700R)可达31.9 wt％,并且具有很好的阻燃性.DOPO-HQ-HE含量的增加对共聚酯的结晶性有较大的破坏,5 mol％ DOPO-HQ-HE的共聚酯PDEBP5的清亮点温度为154.2℃,焓变为4.64 J/g,而PDEBP7.5在POM测试中在升温及降温过程中均难观察到液晶相的双折射现象.     

芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的流变性能

用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了以对羟基苯甲酸（ＰＨＢ）、对苯二甲酸（ＴＰＡ）和双酚Ａ（ＢＰＡ）为单体合成的共聚芳酯液晶熔体的流变性能。结果表明，切变速率、熔体温度及ＰＨＢ链节含量对切粘度和结构粘度有很大的影响。切变速率在１０～１０３／Ｓ、温度２９５～３３０℃范围内，共聚酯粘流活化能△Ｅη为７４．５～２０５．１（ｋＪ／ｍｏｌ）。液晶熔体在剪切流中存在屈服应力τｏ，随温度升高τｏ值降低。在低温、低切变速率下，共聚酯熔体的弹性很小，甚至呈现挤出收缩现象。     

4,4’-对苯二甲酰基二氧二苯甲酸与脂二醇的共聚及液晶性能研究

以对苯二甲酸和对羟基苯甲酸为起始原料合成了液晶单体4，4’-对苯二甲酰二氧二苯甲酰氯（TOBC），用TOBC分别与癸二醇-1，10，己二醇-1，6，戊二醇-1，5，丁二醇-1，4和乙二醇进行缩聚反应，生成了一系列主链型热致液晶共聚酯。用DSC、热台偏光显微镜和X-射线衍射仪等对合成的共聚酯的液晶行为进行了表征，结果表明，合成的共聚酯均为向列型热致液晶，其液晶温度范围在20℃－68℃之间，并随着脂肪族二醇中亚甲基（CH2）单元的增加，共聚酯的熔融转变温度（Tm）和各向同性温度（Ti）均有规律的变化。表明主链型液晶共聚酯分子中柔性间隔基的大小对共聚酯的液晶性质有着明显的影响。     

EFFECT OF SEQUENCE STRUCTURE ON THE THERMOTROPIC LIQUID CRYSTALLINE PROPERTIES OF POLYESTERAMIDES BASED ON DIMETHYLBENZIDINE, BISPHENOL-A AND ρ-TEREPHTHALYL CHLORIDE*

A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers inlow temperature solution polycondensation system. By means of NMR and a computer pro-gram the sequence structure parameters were measured. The effect of sequence structureon liquid crystalline phase transition temperature of PEAs obtained was investigated.     

含芳酯键的双马来酰亚胺Ia／二苯醚二胺共聚物的合成与液晶行为

本文以苯甲酸对苯二酚酯双马来酰亚胺（Ｉａ）和二苯醚二胺为单体，合成了Ｉａ／二苯醚二胺的共聚物，应用ＦＴＩＲ谱、热分析ＤＴＡ和ＤＳＣ、热台偏光显微镜对共聚物的结构和液晶行为进行了研究。该类共聚物具有较好的热致液晶行为，其液晶相结构可以通过共聚物的化学交联反应而固定在交联网络中，从而形成液晶网络材料。     

Thermotropic laterally attached liquid crystalline polymers: I. New stationary phases for high-performance liquid chromatography

Up to now thermotropic liquid crystalline side chain polymers have been seldom used as stationary phases in high-performance liquid chromatography (HPLC). The preparation of a new class of surface modified silica gels is reported. They are obtained by coating on the silica support liquid crystalline polysiloxanes with mesogenic side groups laterally attached to the polymer backbone through a flexible spacer. Their chromatographic behavior in reversed-phase HPLC is described for the separation of polycyclic aromatic hydrocarbons. The results show excellent planarity and rod shape recognition capabilities. Comparisons with low-molecular-mass liquid crystalline-bonded silica and longitudinally attached liquid crystalline polymer-coated stationary phase are also reported. Finally, comparisons to commercially available C₁₈ phases are described for the separation of complex mixtures.     

具有液晶性新型聚芳醚酮的合成与表征

通过联苯二酚(介晶基元)、取代对苯二酚(破坏结晶基元)与4,4'-二氟二苯酮的亲核取代反应合成了一系列具有液晶性的新型聚芳醚酮,采用DSC、PLM和WAXD等方法对聚合物的研究表明:联苯含量为70%时聚合物表现为向列相,联苯含量为50%时聚合物出现近晶相,在外力场作用下,向列相液晶容易形成明暗交替的条带织构.     

光致取向调控偶氮苯侧链液晶聚合物的阻隔特性研究

研究了液晶分子的排列方式对聚合物膜阻隔特性的影响,采用473 nm线偏振光照无定形偶氮液晶聚合物,使其介晶基元发生从无序到有序的取向排列.用膜透射率变化和锥光干涉图表征了分子的取向,其锥光干涉图为粗黑十字,说明在线偏振光下作用下液晶分子取向形成了单相畴沿面内排列的有序态.用金属表面氧化法进一步研究了取向态聚合物膜的阻隔...     

STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS:POLY (ARYLENE TEREPHTHALATECO-HEXAMETHYLENE TEREFHTHALATE)

A series of copolyesters based on terephthaloyl chloride, hexamethylene glycol and hydroquinone or chlorohydroquinone were prepared. The copolymers showed composition-dependent liquid crystalline properties as verified by visual observation of stir-opalescence, polarizing microscope and DSC. The copolyesters with aromatic diol contents over a certain extent (x≥0.2) were thermotropic with wide liquid crystalline temperature ranges. Comparing with the copolyesters based on butylene glycol or ethylene glycol, the minimum fraction of aromatic diol (x value) used to get the liquid crystallinity for all these copolyesters is around 0.2 regardless of the chain lengths of aliphatic glycols. ~1H-NMP studies revealed that copolyesters have microstructure of block sequence distribution and the mesogenie segments shorter than triad with three phenyl nuclei will not provide the liquid crystallinity.     

Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol

Fifteen highly regular hydrogen‐bonded, novel thermotropic, aromatic‐aliphatic poly(ester–amide)s (PEAs) were synthesized from aliphatic amido diols by melt polycondensation with dimethyl terephthalate and solution polycondensation with terephthaloyl chloride. Intermolecular hydrogen bonds more or less perpendicular to the main‐chain direction induce the formation and stabilization of liquid crystalline property for these PEAs. The structure of these polymers, even in the mesomorphic phase is dominated by hydrogen bonds between the amide–amide and amide–ester groups in adjacent chains. Aliphatic amido diols were synthesized by the aminolysis of γ‐butyrolactone, δ‐valerolactone and ε‐caprolactone with aliphatic diamines containing a number of methylene groups from two to six in isopropanol medium at room temperature. Effects of polarity of the solvent on solution polymerization and effect of catalyst on trans esterification were studied. These polymers were characterized by elemental analysis, FTIR, ¹H NMR, ¹³C NMR, solubility studies, inherent viscosity, DSC, X‐ray diffraction, polarized light microscopy, and TGA. All the melt/solution polycondensed PEAs showed multiple‐phase transitions on heating with second transitions identified as nematic/smectic/spherullitic texture. The mesomorphic properties were studied as a function of their chemical structure by changing alternatively m or n. Odd‐even effect on mesophase transition temperature, isotropization temperature, and crystallinity were studied. The effect of molecular weight and polydispersity on mesophase/isotropization temperature and thermal stability were investigated. It was observed that there exists a competition for crystallinity and liquid crystallinity in these PEAs © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2469–2486, 2000     

LIQUID CRYSTALLINE BEHAVIOR OF AROMATIC COPOLYAMIDE IN CONCENTRATED SULPHURIC ACID

The liquid crystalline behavior of anisotropic solutions in 100% sulphuric acid ofaromatic copolyamide obtained by low-temperature solution copolycondensation of tere-phthalic acid chloride (TPC), p-phenylene diamine (PPD) and 4, 4'-diamino-diphenylether(DAPE) has been studied by optical microscopy and X-ray diffeaction. The effects ofinherent viscosity, concentration of copolyamide in sulphuric acid, the content of the thirdmonomer (DAPE) and sequence distribution of copolyamide on the critical concentration,isotropic temperature, phase diagram and texture of liquid crystal were investigated. Theschlieren texture was observed and the results of X-ray diffraction indicate that the con-centrated solutions of copolyamide exhibit nematic liquid crystalline behavior.     

Studies on thermotropic liquid crystalline polymer. XI. Effect of amide group on thermotropic liquid crystalline polymer properties

A series of poly(azomethine)s containing amide, ether, or ester groups was prepared by the condensation of dialdehydes with various diamines. The thermotropic liquid crystalline properties were examined by DSC and microscopic observations. The effects of the number and position of amide groups, which are attached to the rigid segment, on the thermotropic liquid crystalline properties of the homo-and copoly(amide-azomethine-ether)s were also investigated in this study. The copolymerization took place by changing the amount of amide group to obtain copoly(amide-azomethine) ( P13 and P14 ) which exhibit thermotropic liquid crystalline properties. The poly(azomethine)s containing ether or ester groups also exhibited thermotropic liquid crystalline properties. © 1993 John Wiley & Sons, Inc.     

全芳香族热致液晶聚合物与热塑性树脂聚砜的原位复合材料

用自制的四种全芳香族热致液晶聚合物ＢＰ ＬＣＰ、ＢＰＭ ＬＣＰ、ＢＰＡ ＬＣＰ、ＢＰＳ ＬＣＰ与热塑性树脂聚砜（ＰＳＦ）熔融共混，制备了一系列原位复合材料．研究了所得材料的微观形态、热性能、力学性能等，结果显示：四种液晶聚合物中，ＢＰ ＬＣＰ，ＢＰＳ ＬＣＰ在所用加工条件下可在ＰＳＦ中取向成纤，而且这两种共混物断面上存在皮 核效应；ＢＰＭ ＬＣＰ和ＢＰＡ ＬＣＰ未成纤，均以球状存在于ＰＳＦ中．这四种液晶聚合物与ＰＳＦ的相容性较差，各共混物的Ｔｇ均分别接近于二纯组分的Ｔｇ值，ＳＥＭ照片上明显的相界面也能说明以上问题．液晶聚合物对ＰＳＦ有增强作用，但增强效果不很显著，这可能是二者相容性较差所致