Studies on the thermotropic liquid crystalline polymer. XII. Synthesis and properties of crosslinkable thermotropic liquid crystalline homo- and copoly(ether-ester)s

A series of crosslinkable thermotropic liquid crystalline poly(ether-ester)s and copoly(ether-ester)s was prepared. All of the polymers were crosslinked by thermal treatment or photo-irradiation upon heating. The thermal stability and thermal crosslinking reaction of these polymers were investigated. These polymers also could be crosslinked by copolymerization with vinyl monomers, such as styrene or methyl methacrylate. The crosslinked polymers exhibited thermotropic liquid crystalline behavior after softening by heating. The phase behavior of linear polymers and crosslinked polymers was studied by differential scanning calorimetry (DSC) and an optical polarizing microscope equipped with a heating stage. © 1995 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid crystalline polymer. VI. Synthesis and properties of homo- and co-poly(amide-azomethine-ether)

Two series of poly(amide-azomethine-ether)s and poly(ester-azomethine-ether)s were prepared by the condensation of dialdehydes with N,N'-bis(aminobenzamide)s and 4,4′-bis(p-aminophenyl)terephthalester, respectively. The thermotropic liquid crystalline properties were examined by DSC microscopic observations. Almost half of the synthesized polymers exhibit thermotropic liquid crystalline properties which are in the nematic phase since threaded and/or Schlieren textures are observed under polarizing microscope. The effects of the number of amide group and the nature of the nonlinear bibenzamide moiety, which link in the rigid segment, on the thermotropic liquid crystalline properties of the homo- and co-poly(amide-azomethine-ether)s were also investigated.     

Studies on the synthesis and properties of thermotropic liquid crystalline polycarbonates. VII. Liquid crystalline polycarbonates and poly(ester‐carbonate)s derived from various mesogenic groups

Three series of thermotropic liquid crystalline polycarbonates and poly(ester‐carbonate)s were prepared by solution polycondensation of 4,4′‐biphenyldiol (BP), 4′‐hydroxybiphenyl‐4‐hydroxybenzoate (HHB), or 4‐hydroxyphenyl‐4″‐hydroxybiphenyl‐4′‐carboxylate (HHBP), as mesogenic unit, with 1,10‐bis(p‐hydroxybiphenoxy)decane (N10), bisphenol A (BPA), 4,4′‐dihydroxy‐diphenyl ether (BPO), 4,4′‐[phenylbis(oxy)]bisphenol (BPOO), methylhydroquinone (MeHQ), or phenylhydroquinone (PhHQ). One series of cholesteric poly(ester‐carbonate)s were also prepared by using HHBP, the aromatic diols mentioned above and isosorbide as the chiral moiety. All polycondensations were implemented in pyridine by using triphosgene as the condensation agent. The synthesized polycarbonates were characterized by viscometer, FTIR, DSC, TGA measurements, polarizing microscopy equipped with a heating stage, and WAXD powder pattern. In this study, it was found that the liquid crystalline properties of polycarbonates strongly rely on the mesogenic unit applied. HHBP‐series exhibits a wide temperature region of liquid crystalline (LC) phase even with 50% of bisphenol A (BPA), which is a V‐shaped structure and usually destroys liquid crystalline properties. In addition, homopolycarbonate with HHBP structure possesses extraordinarily low phase‐transition temperature and wide liquid crystalline phase range, due to its asymmetric structure. This asymmetric structure results in head‐to‐tail, head‐to‐head, and tail‐to‐tail random conformation of polymer chain. The isosorbide containing poly(ester‐carbonate)s formed cholesteric phase, which showed homogeneous blue, green, or red Grandjean texture upon shearing in molten state and the Grandjean texture could be frozen easily while quenching the sample to the room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1852–1860, 2000     

Preliminary communication - The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4-biphenol and phenylhydroquinone with either 4,4-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70 mol% biphenol. Melting (Tm) and isotropization (Ti) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.     

Preliminary communication - The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4-biphenol and phenylhydroquinone with either 4,4-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70 mol% biphenol. Melting (Tm) and isotropization (Ti) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.     

Study on the thermotropic liquid crystalline polycarbonates. IV. Synthesis and properties of liquid crystalline poly(imide-carbonate)s

Two series of novel thermotropic liquid crystalline poly(imide-carbonate)s were prepared by melt polycondensation from various arylene or alkylene bis(phenylcarbonate)s by using N,N′-bis(hydroxyethyl)pyromellitimide and N,N′-bis(hydroxypropyl)pyromellitimide as monomers. Thermotropic liquid crystalline properties were characterized by a polarizing microscope with a heating stage and a differential scanning calorimeter (DSC). Nematic melts were found for the synthesized aromatic poly(imide-carbonate)s. In order to investigate whether the pyromellitimide unit could be used as a mesogenic unit for preparing LC polymers, a series of aliphatic poly(imide-carbonate)s was prepared in this study. However, no significant LC textures were found under the observation by polarizing microscope. It was suggested that the aspect ratio of the pyromellitimide unit was too short to form liquid crystalline poly(imide-carbonate)s. In addition, it was interesting that the aliphatic poly(imide-carbonate)s with a longer spacer (n = 3) in the pyromellitimide unit showed better crystallinity. Thermostabilities of all synthesized poly(imide-carbonate)s were measured by thermogravimetric analysis (TGA). © 1994 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid crystalline polymer. I. Synthesis and properties of polyamide-azomethine-ether

A series of polyamide-azomethine-ethers was prepared by condensation of 4,4′-diaminoanilide with 4,4′-diformyl-α,ω-diphenoxyalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphenoxyalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphenoxyalkane, respectively. The inherent viscosities of polymers were obviously increased when the polymers were treated by heat under nitrogen at 220°C. The thermotropic liquid crystalline properties were examined by DSC, microscope observations, and TGA. All of the polymers, except polymer A-1, exhibit thermotropic liquid crystalline properties. They also exhibit threaded and/or Schlieren textures examined by the polarizing microscope which indicate a nematic phase. In most cases, the mesophase exists up to ca. 400-460°C shown by TGA study. The mesophase cannot exist above 400-460°C because of the thermal decomposition.     

Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Liquid crystalline polymers XV. Synthesis,properties and cytotoxicity of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain

A new series of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on both 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain were synthesised using solution polycondensation technique of both with different 4,4?-diformyl-α,ω-diphenoxyalkane derivatives. Two model compounds were synthesised from the reaction of each cycloalkanone monomer with benzaldehyde, and their structures were determined using single crystal X-ray diffraction. The structure of the monomers and copolymers was confirmed by elemental and spectral analyses. In addition, the thermal stabilities of these copolymers were evaluated by thermogravimetric analysis. We performed both differential scanning calorimertric and polarised optical microscopic measurements to investigate the thermotropic liquid crystalline properties of synthesised copolymers. The UV?Vis absorption spectroscopy of the liquid crystalline copoly(arylidene-ether) 6f revealed that the system undergoes Entgegen/Zusammen (E/Z) photoisomerisation using UV lamp (450 nm). Moreover, the various characteristics of the prepared copolymers including: solubility, X-ray diffraction analysis, gel permeation chromatography (GPC) and scanning electron microscopy were determined and discussed. The cytotoxicity of the model compounds and selected examples of these copolymers was tested against MCF-7 breast cancer cells. All tested samples showed considerable results, where 6c copolymer gave the best result; it showed cytotoxicity against MCF-7 cell line with IC₅₀ of 0.26 µM.     

Polymer vesicles formed by amphiphilic diblock copolymers containing a thermotropic liquid crystalline polymer block

New amphiphilic diblock copolymers composed of poly(ethylene glycol) and a thermotropic liquid crystalline polymer have been synthesized and demonstrated to form well-defined unilamellar vesicles in water by cryo-electron microscopy.     

Studies on thermotropic liquid crystalline polyurethanes. II. Synthesis and properties of liquid crystalline polyurethane elastomers

Three series of novel thermotropic liquid crystalline polyurethane elastomers (TLCPUEs) were studied. Hard segments were formed by using hexamethylene diisocyanate (HDI) reacted with a mesogenic unit, benzene-1,4-di(4-iminophenoxy-n-hexanol), which also acted as a chain extender. Three diols: 1,10-decanediol,poly(oxytetramethylene) glycol (PTMEG) M _n = 1000 and PTMEG M _n = 2000 were used as the soft segments. The effects of soft segments of polyurethanes on the liquid crystalline behavior were studied. Higher molecular weight TLCPUEs were obtained by adding 30?50 mol % of mesogenic segments to diisocyanates. In contrast to a conventional chain extender such as 1,2-ethylene glycol or 1,4-butyl glycol, the synthesized polyurethane elastomers exhibited a mesophase transition by using a mesogenic unit as the chain extender. Mesophase was found for all synthesized LC polyurethanes except of polymers H2-A-12 and H2-A-7. The structures and the thermal properties of all synthesized TLCPUEs were studied by using FTIR spectroscopy, wide-angle x-ray diffraction (WAXD) and DSC measurements, a polarizing microscope equipped with a heating stage, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). Mechanical properties were also examined by using a tensilemeter. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol

Fifteen highly regular hydrogen‐bonded, novel thermotropic, aromatic‐aliphatic poly(ester–amide)s (PEAs) were synthesized from aliphatic amido diols by melt polycondensation with dimethyl terephthalate and solution polycondensation with terephthaloyl chloride. Intermolecular hydrogen bonds more or less perpendicular to the main‐chain direction induce the formation and stabilization of liquid crystalline property for these PEAs. The structure of these polymers, even in the mesomorphic phase is dominated by hydrogen bonds between the amide–amide and amide–ester groups in adjacent chains. Aliphatic amido diols were synthesized by the aminolysis of γ‐butyrolactone, δ‐valerolactone and ε‐caprolactone with aliphatic diamines containing a number of methylene groups from two to six in isopropanol medium at room temperature. Effects of polarity of the solvent on solution polymerization and effect of catalyst on trans esterification were studied. These polymers were characterized by elemental analysis, FTIR, ¹H NMR, ¹³C NMR, solubility studies, inherent viscosity, DSC, X‐ray diffraction, polarized light microscopy, and TGA. All the melt/solution polycondensed PEAs showed multiple‐phase transitions on heating with second transitions identified as nematic/smectic/spherullitic texture. The mesomorphic properties were studied as a function of their chemical structure by changing alternatively m or n. Odd‐even effect on mesophase transition temperature, isotropization temperature, and crystallinity were studied. The effect of molecular weight and polydispersity on mesophase/isotropization temperature and thermal stability were investigated. It was observed that there exists a competition for crystallinity and liquid crystallinity in these PEAs © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2469–2486, 2000     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Random thermotropic elastomers. I. Effects of substitution and hard/soft segment lengths on properties

Syntheses of segmented copoly(ether-ester)s with (oxy-2-methyl-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl)/(oxy-2-chloro-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl) (methyl-/chloro-substituted) hard segments and poly(oxytetramethylene) soft segments, are reported. The methodology consisted of staged addition melt condensation of terephthaloyl chloride, poly(oxytetramethylene)glycol (POTMG; \[ \bar M_n \] = 250, 650, 1000, 2000) and methyl-/chloro-hydroquinone. Lengths of hard and soft segments were varied while the weight ratio of hard to soft segment was maintained constant. Copolymers were characterised for solubility behavior, and by infrared spectroscopy, x-ray diffraction, DSC, and polarizing microscopy. Thermal properties were found to be dependent on length of soft segment as well as on the type of substituent in the mesogenic core. In both methyl- as well as chloro-substituted copoly(ether-ester)s soft segment glass transition temperature (T_gs) was obtained between ?40 and ?50°C. All copoly(ether-ester)s are elastomeric at room temperature (25°C). These polymers exhibit thermotropic liquid crystalline behavior and were easily sheared and aligned in liquid crystalline state. © 1994 John Wiley & Sons, Inc.     

Flow-induced structure in a thermotropic liquid crystalline polymer as studied by SANS

Small-angle neutron scattering is utilized to determine the flow induced alignment of a model thermotropic liquid crystalline polymer (LCP) as a function of shear rate and temperature. The results demonstrate that the flow-induced structures in thermotropic liquid crystalline polymers have similarities and differences to those in lyotropic liquid crystalline polymer solutions. The shear rate dependence of the alignment shows that the flow-induced alignment correlates very well to the viscosity behavior of the LCP in the shear thinning regime, while temperature variation results in a change in the extent of alignment within the nematic phase. Relaxation results also demonstrate that the flow-induced alignment remains essentially unchanged for up to an hour after the shear field has been removed. Last, there exists a regime at low shear rate and low temperature where alignment of the LCP molecule perpendicular to the applied shear flow is stable. These results provide important experimental evidence of the molecular level changes that occur in a thermotropic liquid crystalline polymer during flow, which can be utilized to develop theoretical models and more efficiently process thermotropic polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3017–3023, 1998     

Studies on the thermotropic liquid crystalline polycarbonates. III. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic thermotropic liquid crystalline polycarbonates were prepared by melt polycondensation from various novel phenylene diphenyl dicarbonates with monomers, such as hydroquinone, methylhydroquinone, chlorohydroquinone, resorcinol, bisphenol A, 4,4′-dihydroxydiphenylsulfone, or phenylhydroquinone, respectively. The thermotropic liquid crystalline properties were studied by polarizing microscope with a heating stage, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). It was found that the nonlinearity of the carbonate group was compensated by resorcinol (1,3-phenylene unit), a bent shape unit. Nematic melts were found for the resulting polycarbonates. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new thermotropic liquid crystalline polymers with paired mesogens containing azobenzene unit: Poly(malonic ester)s

New thermotropic liquid crystalline poly(malonic ester)s with two symmetrical mesogenic units (paired mesogens) were prepared by the polycondensation of 1,6-dibromohexane and novel malonic ester compounds with different flexible ethyleneoxy spacer lengths linked to azobenzene group. All the prepared malonic esters and the resulting polymers exhibited monotropic liquid crystallinity with a nematic texture. The length of the spacer had influence on the temperature of phase transition of them. A possibility of application of the prepared polymers to reversible optical information storage media was also identified through a trans–cis isomerization of azobenzene by UV irradiation.     

A kinked unit‐containing thermotropic liquid crystalline copolyester with low glass transition temperature and broad phase transition temperature

A novel phosphorus‐containing thermotropic liquid crystalline copolyester with kinked unit named as poly(hydroxybenzate‐co‐DOPO‐benzenediol dihydrodipheyl ether terephthalate) (PHDDT) was synthesized successfully by melting transesterification from terephthalic acid (TPA), p‐hydroxybenzoic acid (p‐ABH), 2‐(6‐oxid‐6H‐dibenz(c, e) (1,2) oxaphosphorin 6‐yl)1,4‐benzenediol (DOPO‐HQ), and 4,4′‐dihydroxydiphenyl ether (DOP). The chemical structure, the mesophase behavior, and the thermal properties of the copolyesters were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (¹H, ¹³C, and ³¹P NMR), wide‐angle X‐ray diffraction, polarizing light microscopy (PLM), differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. Results suggested that PHDDTs exhibited the typical nematic mesophase that occurred at low temperatures and maintained in a broad temperature range from 230 °C to higher than 400 °C, and had low glass transition temperature ranging from 154.5 to 166.9 °C. The novel phosphorus‐containing thermotropic liquid crystalline copolyester will have a potential application in preparing various in situ reinforced polymer materials with excellent mechanical properties and flame retardancy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4703–4709, 2009     

Synthesis and characterization of novel thermotropic liquid crystals containing a dimethylamino group

Novel thermotropic liquid crystals containing a terminal dimethylamino group were synthesized via a multi-step route. Three phenyl ring units linked with ester and azomethine groups constituted the mesogenic core. All the compounds were characterized by spectroscopic techniques, polarizing microscopy and differential scanning calorimetry. An enantiotropic nematic phase was observed for all the systems studied.