金属-橡胶硫化粘接研究进展

综述金属 -橡胶胶粘剂及粘接技术进展 ,回顾其发展过程 ,分析不同粘接体系的优缺点 ;探讨金属-橡胶粘接过程中的某些问题及影响粘接的多种因素 ,并对下一步的研究发展提出了部分建议。     

辐射增强PP／BR共混体系的力学性能

研究了在多官能团单体－三烯丙基异氰酸酯存在下，共混体系聚丙烯／１．４－聚丁二烯橡胶的辐射效应，用ＤＳＣ，动态粘弹谱对其进行表征。结果显示，三烯丙基异氰酸酯主要分布于聚丙烯／１．４－聚丁二烯橡胶共混物的界面自高能射线作用下，被引发参与界面反应，从而改善了共混体系的相容性，增强也界面粘接，提高了共混物的力学性能。     

EPDM异氰酸酯官能化与EPDM/PA6的增容

采用熔融接枝聚合法,将极性单体3异丙烯基-a,a'-二甲基苯基-异氰酸酯(TMI)引入三元乙丙橡胶(EPDM),以实现对EPDM的官能化.通过红外光谱对接枝产物进行表征,结果表明TMI已成功接枝到EPDM分子上.采用化学滴定的方法对产物的接枝率进行测定,最高接枝率可达1.34%.将EPDM-g-TMI作为相容剂,应用于EPDM和PA6共混体系(EPDM/PA6),通过平衡扭矩分析、冲击强度测试及扫描电镜对增容效果进行表征,结果表明:共混体系的平衡扭矩和冲击强度均随着相容剂接枝率和含量的增加而增加,当加入4 g接枝率为1.34%的EPDM-g-TMI时,共混物的冲击强度能提高到原来的190%.EPDM的分散情况随着相容剂接枝率和含量的增加而显著改善.     

三元乙丙橡胶/聚丙烯热塑性弹性体

综述了三元乙丙橡胶/聚丙烯(EPDM/PP)热塑性弹性体的发展历程、市场情况以及EPDM/PP热塑性弹性体的结构、性能及其影响因素。EPDM/PP热塑性弹性体由EPDM和PP通过动态硫化技术制备而成,在室温下具有橡胶的高弹性,在加工温度下具有塑料的流动性。在性能上,EPDM/PP热塑性弹性体受加工设备、共混工艺、配合体系的综合影响。     

iPP/HDPE/EPDM三元共混体系的组分分布、相容性和结晶行为

 用DSC、¹³C-NMR、SEM和WAXD等方法研究了IPP/HDPE/EPDM三元共混体系的组分分布、相容性和结晶行为。实验结果表明,EPDM与PE组分的相容性优于与PP组分的相容性,多数EPDM分子链段能够分布在PE组分中;EPDM含量为15％时,共混物相容性最好,SEM照片呈现晶体微区的互连或网络状结构;随EPDM含量增加,总结晶度X_c减小,其中PE组分结晶度X_cE有较大幅度地降低,PP组分结晶度X_cp基本没有变化,这可以根据EPDM和PE、PP之间相容性的差异以及PE、PP两组分在冷却过程中不同的结晶行为来解释。     

改性硅藻土/橡胶复合材料的结构与性能

通过力学性能、扫描电镜(SEM)、红外光谱(IR)、X射线电子能谱(XPS)和热重(TG)分析,探讨改性硅藻土适合橡胶种类及对橡胶结构及热稳定性的影响,并与炭黑及白炭黑进行了对比研究。结果显示:改性硅藻土对氟橡胶(FKM)、丙烯酸酯橡胶(ACM)、三元乙丙橡胶(EPDM)、天然橡胶(NR)以及氯丁橡胶(CR)有增强作用,相容性较好,其中对FKM改性效果最明显,与白炭黑相比,其拉伸强度、扯断伸长率和耐磨性分别提高了28%、17%和30%;EPDM的拉伸强度、扯断伸长率和耐磨性分别提高了11%、12%和14%。并且改性硅藻土能够改善FKM和EPDM的耐热性能。     

EPDM受热氧化与动态流变行为

采用动态流变学方法研究了三元乙丙橡胶(EPDM)高温氧化与动态粘弹响应之间的关系.在熔体状态下,EPDM的动态粘弹行为随温度升高而改变,呈现出非均相结构的流变响应特征;加入复合抗氧剂后,EPDM在一定的时间范围内,呈现均相体系的流变响应特征.这些结果表明,流变响应特征的改变与受热导致EPDM熔体氧化进而引起结构的改变密切相关.低频区域粘弹函数对EPDM结构变化具有敏感响应,2 0 0～2 2 0℃可明显观察到受热氧化导致EPDM结构的生成.     

EPDM/PP热塑性弹性体在循环应力下的老化行为研究

本文研究了动态硫化EPDM/PP热塑性弹性体的动态疲劳老化行为,考察了其力学性能的变化,并分析了产生力学性能下降的原因。实验结果表明,随着疲劳时间的延长、疲劳振幅的增大,材料的断裂强度降低,并认为疲劳过程中完全硫化的EPDM橡胶粒子和热塑性塑料PP界面处的分子链断裂、滑移导致了断裂强度的降低;紫外光的加入,加速了材料在疲劳过程的分子链断裂、滑移速率,使材料的断裂强度有更大程度的降低;在机械疲劳老化单独作用下,材料体系几乎没有发生氧化反应,而紫外光的加入,促使了机械疲劳老化过程中氧化反应的发生。     

提高聚氨酯表面硅橡胶涂层粘接性研究

利用表面处理并借助硅烷偶联剂大幅提高了聚氨酯/硅橡胶(PU/SR)的界面粘接性.利用红外光谱、水接触角以及表面元素分析对PU表面处理效果及偶联剂的反应效果进行检测,利用扫描电镜对材料的表面形貌及界面情况进行观察.并对不同方法得到的PU/SR界面进行剪切和振动疲劳测试以考察其粘接效果并进行比较.结果表明,经过硫酸短时处理过的PU表面生成大量羟基,使得亲水性提高,并大大增强了端异氰酸酯基硅烷偶联剂与PU的接枝反应效果.当室温缩合固化的硅橡胶预聚体涂覆到其表面后,以化学键联接在PU表面的硅烷偶联剂又可以与硅橡胶一起缩合,从而有效的提高了PU/SR的界面粘接性.     

一种可用于直接检测空气中异氰酸酯的比率型荧光探针

异氰酸酯是一类广泛使用的化工原料，但容易挥发到空气中对人体健康造成危害.因此，建立一种快速、方便检测空气中异氰酸酯的方法具有重要的意义.合成了一种荧光探针（N-正丁基-4-羟基-1，8萘二酰亚胺），能与异氰酸酯快速反应，从而使探针的荧光颜色由黄绿色转变为蓝色，实现对异氰酸酯的比率型荧光检测.同时，该探针对异氰酸酯的响应具有灵敏性和选择性.反应机理研究表明，探针萘环4位上的羟基与异氰酸酯基（-NCO）反应生成了氨基甲酸酯基团.为了直接检测空气中的异氰酸酯，制备了一种基于该探针的检测试纸，实现对空气中异氰酸酯高灵敏性、高选择性的检测.该方法对空气中异氰酸酯的检测具有实际意义，同时也为挥发性有机物的检测提供了参考.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.