彩色透明微晶玻璃的吸收光谱

在Li2O-Al2O3-SiO2系统玻璃中掺入少量晶核剂TiO2,ZrO2,P2O5，再掺入稀土离子和过渡金属离子作为着色剂，在高温下溶制得到彩色透明玻璃，对上述玻璃进行微晶化处理，用差热分析（DTA）确定其晶化温度，测定与讨论了所获彩色透明微晶玻璃在紫外波段至近红外波段的吸收光谱特性，研究结果表明，玻璃微晶化后，由于基质玻璃对光的微弱散射，引起吸收的增强，但不改变稀土离子和过渡金属离子的本征吸收峰位。     

Er3+单掺和Er3+/Yb3+双掺铋硼酸盐玻璃的研究

用高温熔融法制备了Er^3 单掺和Er^3 /Yb^3 双掺铋硼酸盐玻璃样品，测量了上述玻璃样品的吸收光谱，荧光光谱，荧光寿命以及红外透过率。对高浓度掺杂Er^3 的铋硼酸盐玻璃中的浓度猝灭现象作出了解释。分析了Er^3 ／Yb^3 双掺铋硼酸盐玻璃样品中Yb^3 离子对Er^3 离子的敏化过程。研究发现Er^3 ／Yb^3 双掺铋硼酸盐玻璃在1．5～1．6μm波段有宽达81nm的荧光半峰全宽。实验还发现在熔制过程中通入氧气对其荧光寿命和红外透过率都有明显的提高。由于该玻璃材料表现出较好的物化性能。因此该材料可望成为宽带光纤放大器的适宜的基质材料。     

溶胶—凝胶法制备SiO2基片Er^3＋：Al2O3光学薄膜

用溶胶—凝胶法在SiO2基片上提拉制备了掺Er^3 ：Al2O3光学薄膜。采用扫描电子显微镜、原子力显微镜、差热—热重分析仪、X射线衍射仪研究了掺Er^3 ：Al2O3光学薄膜的肜貌和结构特性。在900℃烧结后，SiO2基片上提拉15次形成厚度8μm掺摩尔比0．01Er^3 的面心立方结构γ-Al2O3薄膜具有明显(110)择优取向，掺摩尔比0．01Er^3 对γ—Al2O3的品体结构和结晶生长过程木产生显著影响。薄膜具有均匀多孔结构，平均粒径为30～100nm，平均孔径为50～100nm，表面起伏度为10～20nm。掺摩尔比0．01Er^3 ：rAl2O3薄膜，获得了中心波长为1．534μm(半峰全宽为36nm)的光敛发光谱。     

含Ho~(3+)的GeO_2-B_2O_3-BaO-Na_2O-Al_2O_3锗酸盐玻璃的光谱与增益特性

用高温熔融法制备了不同Ho3+离子掺杂浓度65GeO2-12B2O-10BaO-10Na2O-3Al2O3-χHo2O3(χ=0.25,0.75,1.25mol%)锗酸盐玻璃。从吸收特性出发,应用McCumber理论计算了Ho3+离子能级5I8→5I7(~2.0μm)跃迁的吸收截面和5I7→5I8的受激发射截面。根据掺杂离子的浓度以及获得的吸收截面和受激发射截面得到Ho3+离子在此玻璃中的增益截面函数,从该函数可反映出材料的粒子数反转特性。获得的基本光学参数与其它掺杂的玻璃进行了比较,其吸收截面、发射截面和增益截面的最大值具有一定的优势。认为该玻璃在~2.0μm波段的中红外激光器中将有潜在的较大应用前景。     

掺铒碲-钨-钠玻璃基质的光谱性质研究

制备了用于离子交换法制备光波导器件的掺铒碲-钨-钠玻璃基质。应用扎得-奥菲而特(Judd—Ofelt)理论计算了玻璃样品的三个强度参量,由强度参量计算了Er^3 离子的自发跃迁几率、荧光分支比等光谱参量;应用麦克库玻(McCumber)理论,计算了Er^3 离子在1．5μm的受激发射截面,荧光测试发现Er^3 离子的荧光半峰全宽可达65nm。比较了Er^3 离子在不同玻璃基质中的光谱特性。结果表明,Er^3 离子在碲-钨-钠玻璃中具有较高的受激发射截面和较宽的荧光半峰全宽,可以用于宽带光波导器件的制备。     

Tm3+/Ho3+共掺镓铋酸盐玻璃1.47 μm发光特性和能量传递的研究

报道了Tm3+/Ho3+共掺的镓铋酸盐玻璃14Ga2O3-25Bi2O3-20GeO2-31PbO-10PbF2玻璃1.47μm(S波段)发光和能量传递特征,应用Judd-Ofelt理论计算了玻璃的强度参数Ω,(t=2,4,6),自发辐射概率 A、荧光分支比β,荧光辐射寿命τ等各项光谱参数以及有效荧光线宽△λeff和峰值发射截面σpeake.通过测量荧光光谱和荧光寿命研究了Ho3+离子掺杂浓度对Tm3+离子1.47μm波段发光性能的影响,分析了Tm3+和Ho3+之间的能量传递过程.结果表明一定浓度内Ho3+的共掺迅速降低了Tm3+:3 F4能级的粒子数,而对3H4能级粒子数影响不大,从而降低了3F4和3H4能级间布居数反转的难度,极大地提高了1.47 μm发光效率.研究表明镓铋酸盐玻璃是适用于S波段光纤放大器的一种潜在基质材料,而掺杂一定浓度的Ho3+离子有利于提高Tm3+离子在1.47μm波段的发光效率.     

宽带光放大器用掺Er3+碲钨酸盐玻璃

制备了掺Er^3 的TeO2-WO3-ZnO-ZnF2(TWZOF)玻璃,测量了Er^3 在玻璃中的吸收光谱和970nm激光二极管激发下的荧光光谱和荧光寿命,分别采用J-O理论和McCumber理论计算了Er^3 离子的J-O强度参量Ωt(t=2,4,6)和其1．5μm发射的吸收截面和发射截面,研究了其荧光强度、荧光寿命和发射带宽与ZnF2含量的关系。结果表明,Er^3 在TWZOF玻璃中具有较大的1．5μm发射截面,其峰值发射截面为0．86pm^2;同时,Er^3 在TWZOF玻璃中具有很大的1．5μm发射带宽,所得半峰全宽在68～83nm之间;Er^3 在TWZOF玻璃中还具有较小的Ω2值和较大的Ω6值,且随ZnF2含量的增加,Ω2和Ω4均增大;Er^3 离子1．5μm发射峰值荧光强度和荧光寿命总体也随ZnF2含量的增加而增加。     

Li2O-Al2O3-SiO2微晶玻璃加工脆延转变临界条件实验研究

 介绍了Li2O-Al2O3-SiO2微晶玻璃的加工特点。基于纳米划痕技术对Li2O-Al2O3-SiO2微晶玻璃进行了纳米划痕实验,测得微晶玻璃材料脆延转变临界切削深度和临界载荷的平均值分别为125.6 nm和29.78 mN。将实验所得临界切削深度值与基于压痕断裂力学模型建立的脆延转变临界切削深度计算值进行了对比,结果表明,T. G. Bifano基于显微压痕法给出的临界切削深度计算值与实验结果差别较大,结合实验结果对其公式进行了修正;基于压痕断裂力学模型建立的延性域磨削临界切削深度计算值与实验结果相差较小,并分析了产生差异的原因。     

在硅片上沉积厚二氧化硅的火焰水解法研究

用火焰水解和高温烧结的方法在单晶硅基片上制备了厚SiO2和B2O2-P2O2-SiO2光波导包层材料。并用扫描电镜(SEM)和X射线粉末衍射(XRD)方法对其微观形貌和物相结构进行了观察和检测。重点对硅基片上沉积厚SiO2时的龟裂和析晶问题进行了深入研究。从扫描电镜照片可以看出．火焰水解法形成的SiO2粉末呈多孔的蜂窝状结构。这种粉末具有很高的比表面积,因而很容易烧结成玻璃。X射线衍射图谱表明．这种粉末是完全非晶态的。经过烧结以后,从扫描电镜照片可以明显看出硅基片上的SiO2薄膜出现龟裂。同时,X射线衍射测试结果表明有少量SiO2析晶。而通过在SiO2中掺入B2O3、P2O5,上述龟裂和析晶完全消失。用这种工艺制备的SiO2波导包层材料厚度达到20μm以上,表面光滑、没有龟裂,而且是完全玻璃态的,可以用于制备性能优良的各种硅基二氧化硅波导器件。     

激光高反射膜的研究

研究混合膜（TiO2 Ta2O3;Ta2O5 ZrO2)的色散规律，用Ta2O5 ZrO2和SiO2成功地镀制出两个波段（632．8nm,1.06μm)的激光反射膜，使激光破坏阈值提高5％－15％（1．06μm)，膜层吸收小，机械强度增加。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.