微乳法制备纳米TiO2 /SiO2的结构及光催化研究

Nanosized TiO₂ and TiO₂/SiO₂ particles were prepared by hydrolysis of tetrabutyl titanate (TBOT) and tetraethyl orthosilicate (TEOS) in the TX-100 reverse microemulsion. These particles were characterized by TG-DSC, XRD, FTIR, TEM，N₂ adsorption-desorption. Their photocatalytic activity was tested by degradation of methyl orange. The result shows that TiO₂/SiO₂ nanoparticles are with a monodispersed spherical phase and a uniform size distribution，and TiO₂ particles are dispersed on the surface of SiO₂. The band for Ti-O-Si vibration in FTIR was observed, the Ti-O-Si bond increased the stability of anatase TiO₂, suppressed the phase transformation of titania from anatase to rutile. And due to the addition of SiO₂, the average size of titania decreased from 38 nm in pure TiO₂ to 5 nm in TiO₂/SiO₂. It was found, under UV light irradiation, TiO₂/SiO₂ particles showed higher activity than pure TiO₂, and TiO₂/SiO₂(1/1) particles showed the highest photocatalytic activity on the photocatalytic decomposition of methyl orange, which was influenced by crystal structure, particle size, crystallinity and Surface area Characteristics.     

TiO2 / SiO2核 / 壳结构复合粒子的组装及其电化学性能

TiO₂ coated SiO₂ materials as anode for lithium-ion batteries were synthesized via an in situ hydrolysis of tetraethyl orthosilicate under ultrasonic irradiation using nanometer-sized TiO₂ colloids as precursors. The XRD patterns indicate that the as-prepared core/shell particles remain anatase after calcining below 800 ℃. TEM observation shows that the particle size of TiO₂ / SiO₂ composites is ca. 200 nm, and a homogeneous SiO₂ layer is coated on the surfaces of TiO₂ particles. FTIR spectra demonstrate that SiO₂ could have been coated on the surfaces of TiO₂ particles via a chemical bonding. In addition, the first specific charge and discharge capacities of the coated particle electrode were 66.4 mAh·g^-1 and 90.7 mAh·g^-1, respectively, which indicates that the TiO₂ / SiO₂ particles are more stable than the monodispersed TiO₂. Meanwhile, the new material has good lithium intercalation-deintercalation performances.     

Nafion? / TiO2复合膜的质子传导性能研究

Nafion^® / TiO₂ composite membranes were prepared by in-situ chemical reaction method using Ti(OC₄H₉)₄ and Nafion^® 117 as raw materials. The membranes were characterized by UV, FTIR-ATR and XRD, respectively. Methanol permeability and water uptake were investigated as a function of TiO₂ contents. The conductivity of the membranes was measured under water vapor pressure (2.644 7 kPa) or in dry atmospheres. The XRD results showed that the titanium dioxide in Nafion^® membranes were crystallized in anatase phase with an average crystaline diameter of 3.0 nm. The water uptake of the composite membranes was larger than that of the pure Nafion^® membrane when the TiO₂ loading was within 14wt%. The methanol permeability of the membrane decreased as the TiO₂ loading increased. The addition of 3wt% TiO₂ to Nafion^® membranes improved the conductivity in dry measurement conditions. The proton conductivity of the composite membrane increased greatly after the hydrothermal treatment at 160 ℃ for 2 hours.     

电沉积HA/TiO2复合涂层的结合强度和热稳定性研究

HA/TiO₂ composite coating were fabricated via adding TiO₂ powder in the electrolyte by electrodeposition. The influence of current density and deposition time on the content of TiO₂ in the coating, the influence of the content of TiO₂ in the coating on the bonding strength of coating and the influence of sintering temperature on the structure and the bonding strength of coating were investigated. The experiment results show that the content of TiO₂ in the coating increase with reducing the current density and prolonging the deposition time, the bonding strength improve with increasing the content of TiO₂ in the coating, which can obtain 18.7 MPa when the weight percent TiO₂ in the coating attain 72.2 %. The addition of TiO₂ in the coating reduces the thermal expansion coefficient of the coating, improves the bonding strength of coating and changes the fracture mechanism of the coating from adhesion failure to cohesive failure. HA in the composite coatings is decomposed by the catalysis reaction of TiO₂ at the temperature of sinter 850 ℃. Differential scanning calorimetry and X-ray diffractometry analyses showed that the chemical reaction between HA and TiO₂ lead to the product are α-TCP and CaTiO₃ at the temperature of sinter 1200 ℃. In order to prevent the coating from decomposing and attain hign bonding strength, the sintering temperature should be less than 820 ℃.     

镍含量对NiO/SiO2气凝胶性能的影响

A series of NiO/SiO₂ aerogel catalysts were prepared by sol-gel method. The effects of the nickel content on the structure and existing forms of NiO/SiO₂ aerogel catalysts were investigated by using XRD, TPR and FT-IR. The results showed that there were interactions between NiO and SiO₂. But as nickel content increased, the in-teraction decreased. The nickel oxide in the catalysts appeared in different forms as nickel content was changed. When the content was less than 13%, Ni(Ⅱ) entered into the SiO₂ structure completely and it became clusters after calcining. If the content altered from 20% to 50%, NiO existed as both microcrystal and clusters, the later spices was dominating. However, when the content increased to 70%, microcrystal became the primary components.     

电化学法制备高热稳定性锐钛矿型纳米TiO2

Titanium alkoxides were prepared by anodic dissolution of metallic titanium in absolute ethanol in the presence of HN(C₂H₅)₂*HCl (electro－conductive additives).The solution was directly hydrolyzed to prepare nanocrystalline of TiO₂ (about 10nm)by a sol－gel process.The precursor gels was calcined at T=450 ℃ and 720 ℃for 30 min,and nanocrystalline of TiO₂ (anatase) with high textural and thermal stability was obtained.FTIR,XRD,TEM,were used to characterize the structure of titanium alkoxides and nanocrystalline of TiO₂.The characteristics of nanocrystalline of TiO₂ was depended on the properties of titanium alkoxides.The Ti(OEt)₄ as a source of titanium yielded the best textural and thermal stability nanocrystalline of TiO₂.     

Cu/ZnO-TiO2复合半导体光催化材料的制备与表征

The metallic Cu modified n-p coupled semiconductors Cu/ZnO-TiO₂ were prepared by sol-gel method, and their crystal structure, surface composition and absorptivity of UV light were investigated by techniques of DTA-TG, XRD, TEM, BET, TPR, IR and UV-Vis. The results show that the main crystal structure of the coupled-semiconductors is anatase TiO₂ with the particle size in the range of 10～16 nm and BET surface area above 80 m²·g^-1. In the process of Sol-gel the probability to form ZnO is reduced because of the dilution of Zn²⁺ with Ti(OC₄H₉)₄. But through the molecular-level contact with TiO₂, Zn²⁺ cations take the places of the O-tetrahedral and O-octahedral centers to partly form Zn₂TiO₄, and the coupling effects decrease the reflectivity of semiconductors in the wavelength region of 250～400 nm. A photo-exciting mechanism of the semiconductors embedded with metallic Cu was proposed. The Fermi energy of metallic Cu is in the band gap of ZnO and TiO₂, so the addition of metallic Cu offers new energy bands to give and receive the photoelectrons, thus expanding the absorption region of the semiconductors to visible light.     

湿法水解制备可见光催化剂N/TiO2

The N/TiO₂ was prepared by wet hydrolyzation method. The photocatalytic decomposition of benzoic acid solution was carried out under simulated sun light; the photocatalytic activity was 2.47 times of TiO₂. The products were characterized by XRD, SPS, EFISPS and XPS, respectively. The results of XRD showed that the N could restrain the crystallization transformation of TiO₂ from anatase to rutile. The N/TiO₂ was still n-type semiconductor, and the absorbance wavelength appeared red-shifted by N-doping. The band gap of N/TiO₂ was decreased to 2.7 eV. The amount of doped-N is about 0.94at.%. The binding energy of N1s are 396.62 eV (Ti-N bonds, β-N) and 400.87 eV (N-N bonds, γ-N₂), respectively, and the photocatalytic activity of N/TiO₂ under visible light is related to the β-N. The N atoms replace the O of the TiO₂ and form the Ti-N bonding.     

TiO2胶粒在铝合金表面的电泳沉积及所制薄膜的光催化性能研究

TiO₂ membranes were prepared on aluminum-alloy thin plates by electrophoretic deposition and dip coating in a colloid solution of TiO₂, respectively. The photocatalytic activity of TiO₂ membrane was compared using ethylene as reactant, and the crystal and morphological structure of the membrane were characterized by XRD and SEM. The results showed that a more compact membrane with high loading of TiO₂ but lower photocatalytic activity of unit TiO₂ mass was obtained by electrophoresis compared with dip coating method. The addition of polyethylene glycol (PEG) to the sol of TiO₂ could improve the specific photocatalytic activity (ethylene conversion per unit mass TiO₂ and unit area of membrane piece) of the electrophoresis-membrane prepared from the sol, but could not change the specific photocatalytic activity of the dip-coating membrane from the sol. The ethylene conversion on the electrophoresis membrane prepared from the sol containing PEG (50 g·L^-1) was 9 times of that on the dip coating membrane. The effect of PEG on the properties of electrophoresis-membrane of TiO₂ was attributed to the change of electrokinetic properties of sol. Addition of PEG decreased ζ potential value of the sol and the mobility of the sol particle, increased viscidity of the colloid, thus decreasing both the electrophoresis deposition velocity of colloid particles and the electroosmosis velocity of diffuse layer of colloid particles. These favored the formation of a low compact and porous membrane on the electrode in electric field, and thus increasing the availability of TiO₂ in photocatalytic process.     

有机体系中纳米TiO2 / ZrO2修饰电极的制备及电催化活性

The complexes Ti(OCH₂CH₂O)₂ and Zr(OCH₂CH₂O)₂ were directly synthesized by using HOCH₂CH₂OH dissolution in 50 mL flask. The nano-ZrO₂ / TiO₂ powders were prepared by a direct sol-gel synthesis using the above solution and followed by drying at 400 ℃ for 2 h. The complexes were characterized by FTIR and ¹H NMR. XRD and TEM were used to investigate the structure of nano-ZrO₂ / TiO₂. The results show that the complexes containing ^-OCH₂CH₂O^- group could prevent the precursor from agglomeration and sintering during the hydrolysis and calcination process. The ZrO₂ / TiO₂ powders of 20～35 nm was thus obtained in a high purity. The highly active nano-ZrO₂ / TiO₂ modified electrode was prepared by using daubing and calcination. The electro-catalytic activities of this electrode in (COOH)₂ were investigated. The discharge current of nano-ZrO₂ / TiO₂ electrode increased obviously. In preparative electrolysis under optimal conditions, the average yield and current efficiency for HOOC-CHO were 84.7% and 91.6 %, respectively.     

磁载光催化剂TiO2/SiO2/Ni0.5Fe2.5O4的制备及其催化氧化性能

采用固相反应法制备磁载体(SiO₂/Ni_0.5Fe_2.5O₄),溶胶-凝胶法得到易于磁分离回收的磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄。用XRD、SEM、IR和UV-Vis等进行表征。研究了太阳光下催化剂对亚甲基蓝溶液的脱色性能。结果表明,在太阳光下,磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄可使亚甲基蓝溶液迅速脱色；3次循环使用后脱色率仍为95%以上,回收率为98.8%。     

SiO2改性的V2O5-MoO3/ TiO2催化剂抗碱中毒性能研究

以陶瓷为骨架,用溶胶凝胶法和浸渍法制备了V₂O₅-MoO₃/ TiO₂催化剂,并用SiO₂进行改性。采用浸渍法模拟碱K中毒,研究了SiO₂改性前后催化剂中毒脱硝效率的变化,并通过BET、H₂-TPR、NH₃-TPD等技术手段对催化剂进行了表征。结果表明,加入SiO₂后,催化剂的比表面积明显提高。SiO₂改性后新鲜催化剂还原温度向低温方向迁移10 ℃左右,氧化还原能力得到了提高,其表面酸强度和酸量也得到较大的提高。反应评价结果表明,SiO₂改性可以提高催化剂抗碱中毒的性能。     

TiO2/SiO2纳米薄膜的光催化活性和亲水性

通过sol gel工艺在钠钙玻璃表面制备了均匀透明的TiO2/SiO2复合纳米薄膜.实验结 果表明: 当SiO2添加量较高时, TiO2/SiO2复合纳米薄膜的光催化活性明显降低;当SiO2添加 量较低时,TiO2/SiO2复合薄膜的光催化活性无明显变化.在TiO2薄膜中添加SiO2,可以抑制薄 膜中TiO2晶粒的长大,同时薄膜表面的羟基含量增加, 水在复合薄膜表面的润湿角下降, 亲 水能力增强.当SiO2含量为10％－20％（摩尔分数）时获得了润湿角为0°的超亲水性薄膜.     

共沉淀法掺杂SiO_2对V_2O_5-WO_3/TiO_2催化剂SCR性能的影响

通过共沉淀法将SiO_2组分掺入到V2O5-WO3/SiO_2-TiO_2催化剂TiO_2载体中,并通过多种物理化学手段,考察了不同SiO_2掺杂量对催化剂结构、表面性质与SCR性能的影响.结果表明,SiO_2掺入到TiO_2中,Si与Ti形成Si—O—Ti键,使催化剂比表面积增加.Si—O—Ti键的生成以及Si Ox物种上的-OH基团使催化剂表面Br?nsted酸增加,但新增的Br?nsted酸对SCR反应不利,并且SiO_2的掺杂也使得V~(5+)含量降低,Si—O—V键合作用使分散的VOx物种更难还原.Si组分以共沉淀法掺入到V_2O_5-WO_3/TiO_2催化剂会造成脱硝活性的显著下降.     

溶胶-凝胶法制备复合MxOy-TiO2光催化剂

以无机盐TiCl4为原料制备TiO2溶胶,并利用溶胶胶粒修饰法制备SiO2 TiO2、ZrO2 TiO2、WO3 TiO3、MoO3 TiO2及Pt/TiO2光催化剂,用于光催化氧化甲醛反应,考察添加物对 催化剂光催化性能的影响.其中,SiO2 TiO2催化剂的光催化氧化降解甲醛性能最好,而MoO3 TiO2的催化性能最差.SiO2 TiO2催化剂优良的光催化性能可归于SiO2 TiO2催化剂的高 比表面积,高空隙率,小晶粒粒径和强吸光性能等性质的综合影响.     

钛酸酯偶联剂对包硅铝钛白粉表面的有机改性

The surface organic modification of TiO2 particles with titanate coupling reagent,which was pre-coated with double layers of SiO2 and Al2O3,was studied.Experiments showed that the modified particles exhibited hydrophobic characteristics.The modification state of the particle surface was characterized by IR spectroscopic measurement,pyrolytic gas chromatography,thermogravimetric analysis and X-ray photoelectron spectra.The titanate coupling reagent binding with the hydroxyl on the particle surface was analyzed.The surface characteristics of pre-modification and post-modification particles were compared.     

Ni/TiO2-SiO2上光催化重整葡萄糖以低CO选择性制H2（英文）

Nano-sized Ni particles on TiO2-SiO2 were synthesized by the two methods of photo-assisted deposition(PAD) and impregnation.H2,which is a promising energy carrier,with a low CO concentration was produced by the photocatalytic reforming of glucose(a model biomass) on the Ni/TiO2-SiO2 catalyst.The supported Ni enhanced the rate of H2 production while it suppressed CO selectivity.The catalysts were characterized by X-ray diffraction,X-ray absorption fine structure,transmission electron microscope,and nitrogen adsorption analysis.Both H2 production and CO selectivity were strongly dependent on the preparation method,and PAD-Ni/TiO2-SiO2 was the better catalyst for H2 production with the lowest CO concentration.     

胶原纤维为模版制备TiO2及La/TiO2纳米纤维及光催化活性研究

以胶原纤维为模版分别负载钛(Ti4+)或钛(Ti4+)和镧(La3+),在高温下煅烧制得TiO2和La/TiO2纳米纤维。通过扫描电镜(SEM)、场发射扫描电镜(FESEM)、X-射线衍射(XRD)、比表面积和孔径分析、X-射线光电子能谱(XPS)、紫外可见光谱(UV-Vis)等对这2种纳米纤维的结构和物理性能进行了表征。结果表明,TiO2和La/TiO2较完整地保持了胶原纤维的纤维状结构。在600~800℃范围内随着煅烧温度的升高,TiO2和La/TiO2的晶粒尺寸逐渐增大,晶格常数发生各相异性的变化。La/TiO2的相变温度在700~800℃之间,明显高于未掺杂TiO2的相变温度。N2吸附-脱附等温线按Langmiur分类为Ⅳ类,表明TiO2和La/TiO2纳米纤维具有介孔结构。与Degussa P25相比,TiO2和La/TiO2吸收光谱范围明显红移。当以可见光为光源进行酸性橙Ⅱ光助催化降解反应时,TiO2和La/TiO2纳米纤维均表现出比Degussa P25更高的催化活性。     

ZnO/TiO2纳米管复合材料的制备及光电化学性能研究

采用电化学阳极氧化法制备TiO2纳米管,然后用光化学沉积法在TiO2纳米管表面沉积ZnO纳米颗粒制备ZnO/TiO2纳米复合材料。对样品进行了Raman谱、XRD和SEM表征,通过测定光电流-时间(I-t)和开路电压-时间(OCPT)曲线对ZnO/TiO2纳米复合材料的光电化学性能进行研究。结果表明,沉积ZnO没有改变TiO2的相结构;复合ZnO提高了TiO2的光电性能;在Zn(NO3)2浓度为10-3 mol.L-1的条件下制得的ZnO/TiO2纳米复合材料具有较好的光电性能。