液相色谱-质谱法同时测定塑料制品中的双酚A和四溴双酚A

建立了高效液相色谱-质谱同时测定塑料制品中的双酚A(BPA)和四溴双酚A(TBBP-A)的方法。采用超声波萃取技术萃取样品。系统地考察了前处理条件、色谱条件和质谱参数。实验表明,在50 ℃条件下,加入20 mL二氯甲烷对塑料样品中的BPA和TBBP-A超声提取60 min可获得较好的提取效果。以甲醇和水为流动相,采用液相色谱-质谱联用分离和检测BPA和TBBP-A。该方法的线性范围为0.1～2.0 mg/L; BPA和TBBP-A检出限分别为0.01 mg/kg和0.02 mg/kg;回收率为85.4%～97.6%。该方法分离时间短,操作简便,实用性强,灵敏度高,适用于塑料制品中双酚A和四溴双酚A的残留分析。     

同位素稀释液相色谱-串联质谱法测定化妆品中残留的丙烯酰胺

建立了化妆品中丙烯酰胺残留的同位素稀释液相色谱-串联质谱的分析方法。水溶性化妆品样品以水为提取溶剂进行提取,提取液经高速离心处理后,上清液用Oasis HLB固相萃取柱净化;脂溶性化妆品样品以正己烷和水混合溶剂液-液分配萃取。经Waters Atlantis T3色谱柱(150 mm×2.1 mm,3 μm)分离后在多反应监测模式下进行串联质谱定性及定量分析,以13C3-丙烯酰胺为内标定量。方法的定量限为0.1 mg/kg,在0.1～1.0 mg/kg 3个添加水平范围内的平均回收率为87.7%～95.8%,日内测定精密度均小于10%,日间测定精密度均小于12%。该方法能够满足化妆品中丙烯酰胺残留的检测要求。     

农产品中甲草胺残留量的气相色谱-质谱检测

建立了玉米、花生、菠菜、柑橘4种不同类型农产品中甲草胺残留量的检测方法。样品先用丙酮-水(体积比为8∶2)提取,经二氯甲烷液-液分配,再用凝胶色谱(GPC)和固相萃取(SPE)去除色素和提取待测物,最后采用气相色谱-质谱测定,外标法定量。甲草胺的添加水平为0.010～0.200 mg/kg时,平均回收率为86.0%～98.2%;相对标准偏差为5.1%～6.7%;方法的测定低限为0.010 mg/kg。     

超声提取/气相色谱-质谱法测定海洋生物中的多环芳烃

建立了海洋生物体中16种优先控制多环芳烃的超声提取/气相色谱-质谱测定方法,对海洋鱼类、虾类、贝类和蟹类等生物样品的提取、净化和色谱质谱条件进行了优化。以正己烷-二氯甲烷(2∶1)作为溶剂进行超声提取,提取液经60%硫酸溶液和中性氧化铝-弗罗里硅土混合层析柱净化,采用气相色谱-质谱法定性和定量分析。在优化条件下,16种多环芳烃的线性范围为0.005～0.500 mg/L,相关系数(r)不低于0.998 4,检出限为0.03～0.28μg/kg。加标水平为2、20、100μg/kg时,平均加标回收率分别为55%～118%、80%～114%和79%～113%,相对标准偏差(RSDs,n=6)均小于10%。该方法快速、准确、灵敏度高、重复性好,能满足海洋生物体中持久性有机污染物分析的要求。     

凝胶过滤色谱-串联质谱法测定纺织品中的烷基酚聚氧乙烯醚

建立了纺织品中烷基酚聚氧乙烯醚的凝胶过滤色谱-串联质谱(GFC-MS/MS)分析方法。纺织品样品采用加速溶剂萃取法,以无水乙醇为提取溶剂进行提取,提取液经Sep-Pak Carbon/NH2石墨化碳黑/氨基复合型固相萃取柱净化。烷基酚聚氧乙烯醚经Shodex MSpak GF-310 2D色谱柱(150×2.0 mm)分离后,在多反应监测(MRM)模式下进行串联质谱定性及定量分析。方法对壬基酚聚氧乙烯醚(NPnEO)和辛基酚聚氧乙烯醚(OPnEO)的定量限均为0.2 mg/kg,在0.2～5 mg/kg的3个添加水平范围内,NPnEO的平均回收率为84.2%～93.5%,相对标准偏差(RSD)为3.9%～7.5%;OPnEO的平均回收率为85.5%～96.1%,RSD为3.4%～8.1%。该方法能够满足纺织品中烷基酚聚氧乙烯醚的检测要求。     

超声萃取/气相色谱-串联质谱法同时测定皮革制品中20种邻苯二甲酸酯类增塑剂

建立了同时测定皮革制品中20种邻苯二甲酸酯类增塑剂的气相色谱-串联质谱方法。该方法以正己烷为提取溶剂,室温下超声提取皮革制品中的邻苯二甲酸酯类增塑剂,提取液经中性氧化铝固相萃取柱净化后进行气相色谱-串联质谱分析。该方法简便快速,定性定量准确,灵敏度高,DIDP、DINP和DMPP的定量下限(S/N=10)分别为0.2、0.2、0.1 mg/kg,其余17种邻苯二甲酸酯类增塑剂的定量下限均小于50μg/kg,RSD小于12%,平均加标回收率为86%～95%。采用该方法对47个市售皮革制品进行测定,结果在2个样品中检出多种邻苯二甲酸酯类增塑剂。     

高分辨快速液相色谱-串联质谱法测定肉制品中的刚果红

建立了肉制品中刚果红的高分辨快速液相色谱-串联质谱(RRLC-MS/MS)测定方法。均质后的样品经乙腈与正己烷混合溶剂(1∶1)提取,乙腈提取层离心后直接上机测试。使用Agilent XDB C18色谱柱,以乙腈和10 mmol/L甲酸铵水溶液为流动相梯度洗脱,采用多反应监测方式(MRM)负离子模式检测,定量离子对与定性离子对分别为m/z 325.0/416.0与m/z 651.0/152.0,外标法定量。结果表明,刚果红在0.1～10mg/L范围内线性关系良好(r2>0.999),加标回收率为91%～102%,RSD为1.2%～4.0%,检出限与定量下限分别为0.07 mg/kg和0.18 mg/kg。该方法准确、高效,可用于肉制品中刚果红染料的快速检测。     

全二维气相色谱-飞行时间质谱法测定消费品中20种邻苯二甲酸酯类塑化剂

该文建立了日用消费品中20种邻苯二甲酸酯类塑化剂的全二维气相色谱-飞行时间质谱(GC×GC-TOF MS)筛查与定量检测方法。样品破碎后采用正己烷超声提取,提取液经石墨化炭黑(GCB)和无水硫酸镁(MgSO_4)分散固相萃取净化,GC×GC-TOF MS检测,飞行时间质谱定性,外标法定量。结果显示,20种邻苯二甲酸酯类塑化剂在0.03～30 mg/L质量浓度范围内呈良好线性,相关系数(r~2)大于0.99,方法的检出限为0.09～22.13 mg/kg,定量下限为0.25～63.1 mg/kg,在低、中、高3个加标浓度水平下的回收率为63.2%～120%,相对标准偏差(RSD,n=6)为0.30%～10%。将该方法用于实际样品检测,在1例塑料样品中检出邻苯二甲酸二异壬酯,含量为1.55 mg/kg,在1例橡胶样品中检出邻苯二甲酸二丁酯和邻苯二甲酸二(2-乙基)己酯,含量分别为1.48 mg/kg和7.66 mg/kg。该方法准确、高效,前处理操作简单,可同时实现包含5种异构体的20种邻苯二甲酸酯类塑化剂的筛查和确证。     

氘代同位素内标气相色谱-质谱法测定食用香精中的二甲苯麝香

建立了氘代同位素内标气相色谱-质谱测定食用香精中二甲苯麝香含量的分析方法。采用漩涡混合器混合样品,使样品基质均匀分散于萃取溶剂中,再使用超声波提取目标物,探讨了萃取溶剂种类、溶剂用量及超声时间等因素对目标物萃取效率的影响;之后使用GC-MS选择离子监测模式检测,氘代同位素内标法定量,分析了不同极性色谱柱对目标物分离的影响,确定了较佳的特征离子及其丰度比。在优化实验条件下,二甲苯麝香在0.025～0.5 mg/L范围内具有良好的线性关系,相关系数(r2)为0.999 6,平均回收率为94%～116%,相对标准偏差(RSD)为4.2%～6.5%,检出限为0.11 mg/kg,定量下限为0.38 mg/kg。该方法简便、快速、灵敏、准确,适合于食用香精中二甲苯麝香含量的测定。     

固相萃取-气相色谱-质谱法测定食品中23种邻苯二甲酸酯

建立了同时检测食品中23种邻苯二甲酸酯类化合物的固相萃取-气相色谱-质谱(GC-MS)分析方法。样品经正己烷或乙腈提取、玻璃ProElut PSA固相萃取柱净化,GC-MS选择离子监测模式(SIM)测定。考察了不同种类食品的提取、净化方法。23种邻苯二甲酸酯的线性范围除邻苯二甲酸二异壬酯(DINP)和邻苯二甲酸二异癸酯(DIDP)为0.5～5 mg/L外,其余均为0.05～5 mg/L,相关系数(r)除DIDP外均大于0.99。方法的检出限(信噪比为3)为0.005～0.05 mg/kg,定量限(信噪比为10)为0.02～0.2 mg/kg。在10种食品基质中3个加标水平的平均回收率为77%～112%,相对标准偏差(RSD,n=6)为4.1%～12.5%。该方法稳定、可靠,操作简单,适用于食品中邻苯二甲酸酯类化合物的检测与确证。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.