直接竞争酶联免疫吸附分析法测定氰戊菊酯

采用活性酯法,将氰戊菊酯半抗原N-[2-(4-氯苯基)-3-甲基丁酰基]-4-氨基丁酸与载体蛋白共价偶联合成突出氰戊菊酯分子结构特征的人工抗原和包被原.以人工抗原免疫新西兰白兔制备抗血清,采用(NH4)2SO4分步盐析和DEAE纤维素柱层析法从抗血清中分离纯化对氰戊菊酯具特异性亲和力的抗体,采用活性酯法,以辣根过氧化物酶标记半抗原N-[2-(4-氯苯基)-3-甲基丁酰基]-6-氨基己酸.采用固定抗体、氰戊菊酯和酶标半抗原直接竞争结合固相抗体的模式, 建立对氰戊菊酯具高特异性的酶联免疫吸附分析方法.在优化条件下, 测定氰戊菊酯标样检测的线性浓度范围为0.001～10.0 mg/L; 检出限0.001 mg/L; 相对标准偏差(RSD, n=5)为9.19%.小白菜中分别添加0.10和5.0 mg/kg氰戊菊酯,直接竞争酶联免疫吸附分析法(ELISA)测定,重复6次,回收率分别为83.8%～109%和93.6%～110%; RSD分别为11.7%和7.25%.对实际样品的有效检出限为0.007 mg/L.其它常用拟除虫菊酯类杀虫剂(氯氰菊酯、溴氰菊脂、功夫菊酯、醚菊酯、联苯菊酯)不干扰氰戊菊酯的测定.     

对克百威具高度特异性的免疫分析技术研究

合成了保留氨基甲酸酯结构的克百威半抗原,并采用活性酯法与载体蛋白质共价连接制备突出克百威分子结构特征的合成抗原。以合成抗原免疫新西兰白兔获得对克百威具高亲合力的抗血清,采用硫酸铵盐析和ＤＥＡＥ纤维素反相吸附法分离和纯化抗体。以辣根过氧化物酶采用改良的过碘酸钠法标记抗体、混合酸酐法标记半抗原。在此基础上分别建立了对克百威具高度特异性的间接竞争,包被抗原、包被抗体直接竞争酶联免疫吸附测定（ＥＬＩＳＡ）     

氯黄隆酶联免疫吸附分析技术研究

对邻氯苯磺酰胺进行衍生合成半抗原,并与载体蛋白质共价偶联制备突出氯黄隆分子特异性部分的合成抗原,以合成抗原免疫兔获得对氯黄隆具高亲合力的抗血清。采用硫酸铵盐析和ＤＥＡＥ纤维素反相吸附法分离纯化抗体,用辣根过氧化物酶以改良的过碘酶钠法标记 混合酸酐法标记半抗原。在此基础上建立了对氯黄隆具高度特异性的同接竞争,包被抗体,包被抗原直接竞争酶联免疫吸附分析技术。在优化条件下,氯黄隆测定的线性浓度范围为１０＾０－１０＾３ｎｇ／ｍＬ,检出限〈０．１ｎｇ／ｍＬ。邻氯苯磺酰胺及与氯黄隆结构类似的常用磺酰脲类除草剂不干扰氯黄隆的分析。     

去甲氯胺酮半抗原及其全抗原的合成与鉴定

在低温条件下,去甲氯胺酮与琥珀醛酸反应,合成了半抗原羧基-去甲氯胺酮,电喷雾质谱鉴定结果表明,目标半抗原合成成功;通过碳二亚胺法将半抗原与载体蛋白偶联制备人工抗原,红外光谱法鉴定结果表明,人工抗原合成成功,基质辅助激光解析电离飞行时间质谱鉴定表明去甲氯胺酮半抗原与牛血清白蛋白的偶联比为11:1。经动物免疫,获得高效价特异性多克隆抗体,抗血清效价可达5.12×104。     

基于高特异性单克隆抗体的间接竞争ELISA检测食品中胭脂红的研究

该研究设计合成了一种胭脂红半抗原,分别采用重氮化法和戊二醛法将半抗原与载体蛋白偶联制备人工抗原,通过免疫Bal b/c小鼠及杂交瘤技术成功筛选制备了胭脂红高特异性单克隆抗体,与苋菜红、柠檬黄等结构类似物无交叉反应.基于该抗体建立了间接竞争酶联免疫分析方法用于检测食品中胭脂红残留.该方法对胭脂红的半抑制浓度(IC50)和...     

硫代磷酸二乙酯类农药半抗原设计及抗体识别特性

通过分析硫代磷酸二乙酯类农药的结构特点, 设计并合成了系列半抗原; 采用活泼酯法将半抗原分别与牛血清蛋白(BSA)和卵清蛋白(OVA)偶联制备了系列免疫原和包被原; 通过免疫新西兰大白兔获得了相应抗硫代磷酸二乙酯类农药的类特异性抗体. 建立检测硫代磷酸二乙酯类农药的间接竞争酶联免疫分析(ELISA)方法, 分析探讨了免疫半抗原结构对抗体特性的影响, 并阐述了包被半抗原结构对ELISA灵敏度的影响规律. 结果表明, 手臂取代位置在苯环对位且手臂较短的免疫原具有较好的免疫效果, 同时异源包被可以显著提高ELISA方法的灵敏度. 由抗体PAb-H1和包被原H6-OVA建立的间接竞争ELISA方法可以同时检测7个广泛使用的有机磷农药, 其半抑制浓度(IC50)分别为蝇毒磷(0.013 mg/L)、对硫磷(0.348 mg/L)、喹硫磷(0.022 mg/L)、三唑磷(0.035 mg/L)、甲拌磷(0.751 mg/L)、除线磷(0.850 mg/L)及辛硫磷(1.301 mg/L), 最低检测限符合国内外相关有机磷药物最大允许残留限量标准(MRLS)的检测要求.     

对硫磷化学发光酶联免疫吸附分析方法的建立和评价

建立了基于多克隆抗体的对硫磷间接竞争化学发光酶联免疫吸附分析方法(icCLEIA)。以三氯硫磷为原料,经三步取代反应合成对硫磷半抗原,通过活泼酯法将半抗原分别与牛血清蛋白(BSA)和卵清蛋白(OVA)偶联,制备免疫抗原和包被抗原。经免疫新西兰大白兔,获得对硫磷抗血清。通过优化条件参数,建立了对硫磷的icCLEIA分析方法。本方法的检测线性范围为0.24～15.83!g/L;半抑制浓度IC50为1.14!g/L;检出限为0.09!g/L;对蔬菜样品和水样品的平均添加回收率为74.6%～121.0%。本方法可用于实际样品中痕量对硫磷残留检测。     

利用Pen a 1表位抗体亲和纯化目标蛋白的研究

以虾致敏蛋白Pen a 1(Tropomyosin)抗原表位为研究对象,建立了利用Pen a 1表位抗体亲和纯化致敏蛋白的新方法。Fmoc法合成致敏Pen a 1蛋白的C端含有3个抗原表位的第247~284位氨基酸对应的多肽片段,应用马来酰亚胺法将多肽与KLH(匙孔血蓝蛋白)、BSA(牛血清白蛋白)偶联制备人工免疫抗原(Peptide-KLH)和人工包被抗原(Peptide-BSA),免疫人工抗原免疫纯种新西兰白兔,获得多克隆抗血清,抗血清经辛酸-硫酸铵及特异性血清纯化预装柱(HiTrap rProtein A FF)纯化后与溴化氰活化琼脂糖凝4B(CNBrActivated Sepharose 4B)进行偶联。ELISA(酶联免疫吸附试验)测定该多克隆抗体效价为2.05×106,多肽对抗体的IC50(50%抑制浓度)为0.21 mg/L,交叉试验表明该抗体与虾中非Pen a 1蛋白无交叉反应性;Bradford法测定CNBr-Activated Sepharose 4B与抗体的偶联率为90.76%。间接竞争ELISA测定1 mL偶联介质的吸附容量为2.84 mg Pen a 1,免疫亲和柱的加标回收率为89.6%~93.6%,亲和柱使用寿命为4次。     

小分子阿特拉津和罂粟碱检测的免疫芯片技术研究

采用蛋白芯片竞争法对小分子半抗原的污染物进行检测。在获得特异性抗体的前提下,首先将阿特拉津半抗原进行了衍生化,然后将该衍生物和氨基罂粟碱分别与载体蛋白质卵清蛋白(OVA)进行偶联。实验证明新合成的完全抗原能够与其相应抗体发生特异性的结合。实验还对蛋白芯片检测阿特拉津进行了条件优化,其抗体固定化时间为2h,用卵清蛋白为封闭液的封闭时间为1h,样品稀释液pH值为8．0。并对阿特拉津及罂粟碱进行了定性、定量实验,结果表明：荧光信号强度随待测物浓度的降低而增强,有一定的线性趋势,阿特拉津检出限为0．001mg/L,罂粟碱检出限为0．01mg/L。     

基于分子模拟的脱氧雪腐镰刀菌烯醇半抗原分子设计及免疫效果研究

运用分子模拟软件Hyperchem 7.5,对脱氧雪腐镰刀菌烯醇(DON)及其6种不同连接臂修饰后的DON衍生物的分子构型进行量化计算,通过对其结构参数以及分子轨道的计算比较,获得高特异性、高生物活性的DON半抗原结构,避免了半抗原设计方面的盲目性。同时合成了其中的3种半抗原,通过碳二亚胺(EDC)法与BSA进行偶联免疫Bal b/c小鼠,制备多抗血清,采用间接酶联免疫吸附法(ELISA)和间接竞争ELISA法进行抗体效果的比较。结果表明,分子模拟计算结果与免疫实验的结果相一致,分子模拟对半抗原结构设计具有指导性意义。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.