GdAlO_3:Er~(3+),Yb~(3+)荧光粉的制备与上转换发光性能

采用共沉淀、溶胶-凝胶和固相反应法制备了GdAlO3:Er3+,Yb3+荧光粉.借助X射线衍射、扫描电子显微镜、傅里叶变换红外光谱、N2-吸附、吸收光谱和荧光光谱等手段研究了不同方法制备的GdAlO3:Er3+,Yb3+荧光粉结构、形貌、表面基团和光吸收及上转换发光性能.结果表明:用共沉淀法比固相反应法和溶胶-凝胶法可以在更温和的条件下制得纯相GdAlO3:Er3+,Yb3+荧光粉,用共沉淀法和溶胶-凝胶法制备的GdAlO3:Er3+,Yb3+荧光粉颗粒都在纳米尺寸,溶胶-凝胶法制得的样品存在相对严重的颗粒团聚现象,而用固相反应法制备的荧光粉为微米级颗粒.GdAlO3:Er3+,Yb3+荧光粉在980 nm激发的上转换发射光谱包含波长为524和546 nm的绿光与659 nm的红光,且三种方法制备的样品绿光发射强度都显著高于红光.不同方法制备的荧光粉上转换发光强度和红光/绿光强度比相差较大,共沉淀法制备的样品上转换发光强度要显著高于固相法以及溶胶-凝胶法制备的样品,而溶胶-凝胶法制备的样品发光中红光/绿光相对强度比最高.红外光谱显示,不同方法制备的GdAlO3:Er3+,Yb3+荧光粉表面OH-、CO32-及CO2官能团含量不同,溶胶-凝胶法制备的样品要明显高些.基于红外光谱、不同Er3+和Yb3+离子掺杂浓度及不同激光功率上转换发光的结果,对Er3+和Yb3+之间的能量传递过程及不同方法制备荧光粉的上转换发光性能进行了讨论.     

TiO_2-SiO_2纳米粒子的合成及二级散射光谱法测定核糖核酸

采用溶胶-凝胶法制备了TiO2-SiO2纳米粒子.通过X-射线衍射谱、透射电子显微镜等对纳米粒子进行了表征.研究了TiO2-SiO2纳米粒子与核糖核酸(RNA)的相互作用,建立了基于纳米粒子与RNA吸附反应,二级散射光谱法测定痕量RNA的新方法.方法的线性范围是0.005～5 mg/L; 检出限为1.46 μg/L.方法用于RNA合成样品的测定,回收率为99.4%～103.9%;相对标准偏差为019%～0.24%.     

自生纳米纤维增强SiO_2气凝胶的制备及性能研究

采用溶胶-凝胶法和乙醇超临界干燥工艺制备ZrOX/SiO2复合气凝胶,再经1 200℃高温热处理得到自生纳米纤维增强SiO2复合气凝胶。利用扫描电子显微镜、透射电子显微镜、X射线衍射、热重和氮气吸附等手段对气凝胶的结构和性能进行了分析,并且测试了样品的压缩强度及真密度。实验结果表明:自生纳米纤维增强SiO2复合气凝胶具有均匀的多孔网络结构,锆氧纳米纤维是以化学键连接复合的方式无序穿插在气凝胶中,对复合气凝胶的机械强度和隔热性能有明显的改善。经1 200℃热处理后的ZrOX/SiO2复合气凝胶比表面积为827.22 m2·g-1,压缩强度为9.68 MPa,真密度为0.23 g·cm-3。     

锂离子电池纳米N iO负极材料的研究

分别应用溶胶凝胶法和室温固相法合成纳米N iO材料,运用DSC、TG等热分析技术分析了合成的样品,通过选择不同的溶剂和调节溶液的pH值,优化溶胶凝胶法合成纳米N iO负极材料.XRD、TEM技术表征材料的结构和形貌,并对所得材料作了电化学性能测试.     

纳米氧化铁的研究进展

介绍纳米氧化铁在颜料、气敏材料、催化剂及生物医学等方面的应用,纳米氧化铁的氧化沉淀法、固相合成法、胶溶-相转移法、溶胶-凝胶法、强迫水解法、水热法、柠檬酸铁热分解法等制备方法,并对今后的研究方向进行了展望。     

添加三甲基乙氧基硅烷制备耐高温硅/铝复合气凝胶

以仲丁醇铝(ASB)和三甲基乙氧基硅烷(TMEO)为前驱体,采用溶胶-凝胶法,经乙醇超临界干燥制备了耐温高、成型性好的硅/铝复合气凝胶。用透射电子显微镜、N2吸附分析仪、红外光谱仪、X射线衍射仪、hot disk热分析仪等仪器表征了气凝胶的形貌、孔结构、表面基团、晶相、热学等性能。在溶胶-凝胶过程中,通过添加TMEO在氧化铝纳米颗粒表面引入了-Si-(CH_3)_3基团,该基团经高温热处理后会在Al_2O_3表面形成SiO_2纳米颗粒,有效地抑制了Al_2O_3纳米颗粒在高温下的晶体生长,使得该复合气凝胶具有优异的耐温性能。在1 200℃高温处理后,线性收缩低至16%,比表面积可达141 m~2·g~(-1),这将进一步促进气凝胶材料在高温保温隔热、吸附、催化等领域的广泛应用。     

量子顺电体La1/2Na1/2TiO3纳米晶的制备与谱学表征

用改进硬脂酸溶胶-凝胶法制备了量子顺电体La_1/2Na_1/2TiO₃纳米晶,用差热-热重分析和X射线衍射测试了样品的晶化过程及物相结构,用FTIR和Raman光谱表征了其谱学特性.     

硅胶G基纳米钛酸锶钡吸附富集-火焰原子吸收法对水中Pb~(2+)的测定

采用溶胶-凝胶法制备了硅胶G基纳米钛酸锶钡,并且用X射线衍射(XRD)、扫描电镜(SEM)和傅立叶变换红外光谱(FTIR)进行了表征.系统地研究了该物质对水中铅的吸附性能.提出了硅胶G负载纳米钛酸锶钡分离富集,FAAS法测定水中痕量铅的新方法.结果表明,纳米钛酸锶钡能够负载于硅胶G表面,制成蚕茧状颗粒吸附材料.在pH值为4～6时,该吸附剂对水中的铅离子具有很强的吸附能力,静态吸附容量达到86.28m/g.吸附在硅胶G负载纳米钛酸锶钡上的铅离子可用1mol/L的硝酸完全洗脱下来,经硅胶G负载纳米钛酸锶钡富集10倍后,方法检出限为7.4μg/L.用于河水和自来水中痕量铅的测定,结果满意.     

活性炭负载纳米TiO2光催化降解性能研究

本文研究活性炭负载纳米TiO2的光催化降解性能和影响甲基橙废水处理的主要因素。结果表明:用溶胶-凝胶法制备的TiO2-活性炭催化剂具有比表面积大、分散性高、光催化降解性能好、可重复利用等优点;采用30W高硼紫外光灯,TiO2-活性炭光催化降解浓度为1500mg/L甲基橙废水的最优工艺条件是:催化剂活化温度为700℃、用量为1.0g/L、废水起始pH值为1、反应温度为45℃、光照时间为50m in。在此条件下,甲基橙和CODC r的去除率分别达99.8%和99.7%。     

溶胶-凝胶法制备α-Fe_2O_3纳米晶

研究了在硝酸铁 -乙二醇甲醚体系中用溶胶 -凝胶法制备氧化铁纳米晶 .利用 TEM、XRD和 TG- DTA手段对产物进行了表征。结果表明 ,体系中加入十二烷基磺酸钠有助于纯相α- Fe2 O3纳米晶的生成 ,而加入钛酸四丁酯则显著缩短凝胶时间 ,所得粉体的原始晶粒尺寸为 30 nm左右 .若加入硅酸乙酯替代钛酸四丁酯 ,则最终产物为 γ氧化铁和 α氧化铁的混晶相 ( γ- Fe2 O3为主晶相 ) ,晶粒尺寸约 10 nm .     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。