Fe100－xPdx合金纳米线阵列的制备及其磁性研究

利用直流电沉积法在多孔阳极氧化铝模板中制备出了一系列Fe_100-xPd_x磁性纳米线阵列. Pd的增加使纳米线的总体磁性降低，各向异性和矫顽力也发生了较大的变化. 当Pd含量高达x=30时，纳米线仍有相当高的矫顽力(7.48 kA/m)和较明显的各向异性，但当Pd的含量增加到50%时，纳米线的易磁化方向由平行线的方向反转到垂直线的方向. 实验证明，这是由于在Fe₈₀Pd₂₀和Fe₇₀Pd₃₀中连续的磁性相在Fe₅₀Pd₅₀纳米线中变成了与非磁性相相互间隔的非连续片状结构. 片状磁性相的形状各向异性使易磁化方向转变到垂直纳米线轴的方向. 从生长动力学的角度对Fe₅₀Pd₅₀纳米线中这种片状的形成进行了解释. 关键词： 纳米线 电化学沉积 磁性     

COxCu1-x复相纳米线阵列的制备及其磁性的研究

利用电化学沉积方法在同一种富Co2 溶液Co2 /Cu2 =10:1中.利用不同的沉积电位成功地制备了一系列不同成分(x=0.38-0.87)和复合相结构的CoxCu1-x纳米线阵列.发现随着纳米线中Cu含量的变化,CoxCu1-x纳米线的复相结构随之发生规律的变化,最终导致纳米线的磁性也随之规律的变化.随着纳米线中Cu含量的不断增加,一部分Cu与Co形成面心立方结构(fcc)的CoCu固溶体,减弱了磁晶各向异性与形状各向异性的竞争,从而提高样品的方形度;一部分Cu以fcc结构的Cu单质的形式存在于纳米线中,并随着Cu颗粒大小的不同分别起到破坏磁晶各向异性和钉扎畴壁的作用,从而增加纳米线的方形度和矫顽力.对比不同成分的样品,发现CoxCu1-x纳米线的方形度和矫顽力的最大值分别出现在Co75Cu25和Co60Cu40中,并且由于其特殊的复相结构致使它们的值要好于相同直径的单相结构的结果.     

束状形貌Co89Cu11纳米线阵列的制备及其磁性研究

利用直流电化学沉积法通过调节沉积参数在多孔阳极氧化铝模板中制备出了束状形貌的Co₈₉Cu₁₁纳米线阵列.结构分析表明,束状结构就是沿纳米线长轴方向密集排列的堆垛层错,根据CoCu纳米线的生长机理对这种结构的形成进行了解释.在相同成分比的情况下,该结构的Co₈₉Cu₁纳米线阵列具有明显优于一般结构的矩形比（S_∥=096）,说明该结构的纳米线阵列的形状各向异性远好于一般结构.通过磁性测 关键词： 磁性纳米线 电化学沉积 反磁化机理     

电弧炉制备的Sm2Fe17-xCrx化合物的结构与磁性

通过X射线衍射、磁测量等手段对电弧炉制备的不同热处理条件的Sm₂Fe_17-xCr_x（x=1—3）化合物的结构和磁性进行了研究.结果表明1050 ℃下退火5 d的Sm₂Fe_17-xCr_x（x=1—3）化合物具有菱方相的Th₂Zn₁₇型结构,同样温度下退 关键词： 2Fe_17-xCr_x化合物')" href="#">Sm₂Fe_17-xCr_x化合物 磁体积效应 居里温度 磁晶各向异性     

纳米结构CoxFe3-xO4多孔微球的磁性及交换偏置效应研究

用乙二醇为溶剂,用三氯化铁、二氯化钴和醋酸铵为起始反应试剂,通过溶剂热反应首次合成了纳米结构Co_xFe_3-xO₄多孔微球.用X射线衍射仪(XRD)、透射电子显微镜(TEM)和扫描电子显微镜(SEM)表征样品的结构和形貌,结果表明,所制备的单分散Co_xFe_3-xO₄多孔微球为立方多晶结构,其直径约300 nm,是由约30 关键词： xFe_3-xO₄')" href="#">Co_xFe_3-xO₄ 多孔微球 磁性 交换偏置效应     

Tb2AlFe16-xMnx化合物的结构、磁性及正电子湮没谱研究

通过X射线衍射、磁测量及正电子湮没谱等手段研究了Tb₂AlFe_16-xMn_x（x=1—8）化合物的结构和磁性.X射线衍射研究结果表明Tb₂AlFe_16-xMn_x化合物具有六角相的Th₂Ni₁₇型结构.室温下的正电子湮没实验研究表明,Mn对Fe的替代导致化合物中的铁磁相互作用减弱,并且化合物中存在着较强烈的磁弹耦合效应.磁测量研究结果表明,Mn的替代导致Tb₂AlFe_16-xMn_x化合物的居里温度及自发磁化强度急剧下降. 关键词： 2AlFe_16-xMn_x化合物')" href="#">Tb₂AlFe_16-xMn_x化合物 磁弹耦合效应 居里温度     

Zn1-xCoxO稀磁半导体薄膜的结构及其磁性研究

利用X射线吸收精细结构、X射线衍射和磁性测量等技术研究脉冲激光气相沉积法制备的Zn_1-xCo_xO (x＝0.01,0.02)稀磁半导体薄膜的结构和磁性.磁性测量结果表明Zn₁-xCo_xO样品都具有室温铁磁性.X射线衍射结果显示其薄膜样品具有结晶良好的纤锌矿结构.荧光X射线吸收精细结构测试结果表明,脉冲激光气相沉积法制备的样品中的Co离子全部进入ZnO晶格中替代了部分Zn的格点位置,生成单一相的Zn_1-xCo_xO 稀磁半导体.通过对X射线吸收近边结构谱的分析,确定Zn_1-xCo_xO薄膜中存在O空位,表明Co离子与O空位的相互作用是诱导Zn_1-xCo_xO产生室温铁磁性的主要原因. 关键词： 1-xCo_xO稀磁半导体')" href="#">Zn_1-xCo_xO稀磁半导体 X射线吸收精细结构谱 脉冲激光气相沉积法     

Ti1－xCrxO2±δ体系的相关系、晶体结构和磁性能研究

采用溶胶凝胶法制备了Ti_1-xCr_xO_2±δ体系系列样品.利用扫描电子显微镜(SEM)，X射线光电子能谱(XPS)，粉末X射线衍射分析(XRD)方法研究了Ti_1-xCr_xO_2±δ系列样品的颗粒尺寸、形貌、组分化学态、相关系和固溶区范围；并利用超导量子干涉磁强计对样品的磁性能进行了研究.采用Rietveld结构精修的方法研究了Cr的不同掺杂量对TiO₂晶体结构的影响，研究表明，1000℃烧结的样品的固溶区范围是x=0—0.03，为金红石单相；随着Cr掺杂量的增加，金红石相晶胞参数规律性地减小；当x>0.03，为金红石相和CrO₂相两相共存.综合XRD和磁性测量结果，500℃烧结的样品的固溶区范围是x=0—0.02，为锐钛矿单相；随着Cr掺杂量的增加，锐钛矿相晶胞参数规律性地减小；当x≥0.04，为锐钛矿相和绿铬矿相(Cr₂O₃)两相共存.XPS实验结果表明，500℃和1000℃退火的样品中Cr都是以Cr⁺³和Cr⁺⁶两种化学态存在，1000℃烧结的样品中可能有更多的Cr³⁺转化为Cr⁶⁺.根据M-H和M-T曲线的测试结果发现，本文500℃烧结的Ti_1-xCr_xO_2±δ体系样品当x=0—0.02时，为室温铁磁性.当x≥0.04时，由铁磁相和顺磁相所组成，在低温下有较强的铁磁性；室温下主要是顺磁相，铁磁相只占据很小的体积分数. 关键词： 1-xCr_xO_2±δ体系')" href="#">Ti_1-xCr_xO_2±δ体系 相关系 固溶区 磁性能     

Cu对Zn1－xFexO稀磁半导体磁性的影响

采用水热法，在温度430 ℃，填充度35%，矿化剂为3 mol·L^-1KOH，前驱物为添加适量的FeCl₂·6H₂O的Zn(OH)₂，反应时间24h，合成了Zn_1-xFe_xO和Zn_1-xFe_xO：Cu稀磁半导体晶体.当在Zn(OH)₂中添加一定量的FeCl₂·6H₂O为前驱物，水热反应产物为掺杂Fe的Zn_1-xFe_xO多种形态晶体混合物，其个体较大的晶体中的Fe原子百分比含量为0.49%—0.52%.采用超导量子干涉磁强计测量了材料的磁性，晶体的磁化强度随温度下降而减小.在前驱物中同时加入适量比例的Cu化合物，合成了共掺杂Cu的Zn_1-xFe_xO：Cu，和Zn_1-xFe_xO相比，其室温下的磁化强度有明显的提高，且在室温下具有铁磁性. 关键词： 氧化锌 水热 稀磁半导体 晶体     

YBa2Cu3O7-x涂层导体的外延生长和性能对CeO2缓冲层的依赖性

利用倾斜衬底沉积法在无织构的金属衬底上生长了MgO双轴织构的模板层,在这一模板层上实现了YBa₂Cu₃O_7-x薄膜的外延生长.在外延YBa₂Cu₃O_7-x薄膜前,依次沉积了钇稳定的立方氧化锆和CeO₂作为缓冲层.利用X射线衍射2θ扫描、扫描、Ω扫描和极图分析测定了这些膜的结构和双轴织 关键词： 2Cu₃O_7-x镀膜导体')" href="#">YBa₂Cu₃O_7-x镀膜导体 2缓冲层')" href="#">CeO₂缓冲层 厚度依赖性 外延生长     

Controlled Cu content of electrodeposited CoCu nanowires through pulse features and investigations of microstructures and magnetic properties

CoCu alloy nanowire arrays embedded in anodic alumina template were fabricated by ac pulse electrodeposition. Different off-times between pulses in an electrolyte with constant concentration of Co⁺² and Cu⁺² and acidity of 4 were employed. The effect of deposition parameters on the alloy contents, microstructures and magnetic properties of Co_xCu_1−x nanowires were studied. It is shown that Co content decreased by increasing the off-time between pulses in a wide range (x = 0.53-0.07). These results are in consistence with saturation magnetization, which was reduced with increase in the off-time between pulses. It was also found that by optimizing the off-times, it is possible to fabricate CoCu nanowires with mixed phase of hcp Co, fcc Cu and fcc CoCu crystal phase.     

高矫顽力的Co70Cu30合金纳米线阵列的制备及磁性研究

利用直流电化学沉积法, 在多孔阳极氧化铝模板中首次制备出了具有[220]取向的单晶 面心立方结构的CoCu固溶体合金纳米线阵列, 其Co含量高达70%.透射电子显微镜显示纳米线均匀连续, 具有较高的长径比, 约为300. 磁性测量表明所制备的Co₇₀Cu₃₀ 合金纳米线具有超高的矫顽力H_c//=2438 Oe(1 Oe=79.5775 A/m)和较高的矩形比S//=0.76, 远高于以往报道的CoCu合金纳米线的磁性, 分析表明磁性好的主要原因是由于较高Co含量和高形状各向异性. 通过磁性测量和模型计算, 得到Co₇₀Cu₃₀ 合金纳米线阵列在反磁化过程中遵从对称扇型转动的球链模型, 并从结构的角度分析了Co₇₀Cu₃₀合金纳米线阵列的反磁化行为.     

Synthesis and magnetic properties of Fe100-xMox alloy nanowire arrays

The Fe100-xMox(13≤x≤25) alloy nanowire arrays are synthesized by electrodeposition of Fe 2+ and Mo 2+ with different ionic ratios into the anodic aluminum oxide templates.The crystals of Fe100-xMox alloy nanowires gradually change from polycrystalline phase to amorphous phase with the increase of the Mo content and the nanowires are of amorphous structure when the Mo content reaches 25 at%,which are revealed by the X-ray diffraction and the selected area electron diffraction patterns.As the Mo content increases,the magnetic hysteresis loops of Fe100-xMox alloy nanowires in parallel to the nanowire axis are not rectangular and the slopes of magnetic hysteresis loops increase.Those results indicate that the magnetostatic interactions between nanowires and the magnetocrystalline anisotropy both have significant influences on the magnetization reversal process of the nanowire arrays.     

The size and space arrangement roles on coercivity of electrodeposited Co1−xCux nanowires

Magnetization curves with various magnetic field orientations and nanowire diameters were measured at room temperature. The measured coercivity as a function of angle (θ) between the field and wire axis reveals that the coercivity decreases with increasing value of θ for various nanowires. Theoretically, based on Monte Carlo simulation we investigated the magnetization reversal modes of the Co_1−xCu_x nanowires and obtained also the θ dependence of the coercivity. Comparing the simulated with the experimental results, we find that the magnetocrystalline anisotropy plays an important role on the magnetic properties of Co_1−xCu_x nanowires, and the magnetization reversal process in the Co_1−xCu_x nanowires could not be understood by the classical uniform rotation mode in the chain-of-sphere model.     

Fabrication and magnetic properties of CoxPd1−x composite nanowire

A series of Co_xPd_1−x   (x=0.37–0.85$x=0.37–0.85$) nanowire arrays have been successfully deposited in a single Co²⁺/ Pd²⁺=20:1 solution by applying the various depositing potentials. We found that the nanowires are the composites of CoPd alloy with some Co and Pd clusters, but the overall structure of the composite wires followed the binary phase relation of Pd–Co. The existence of Pd content makes the nanowires structured in FCC phase, except for Co_0.85Pd_0.15 sample in which some HCP Co phase coexists with the dominating FCC phase. Between Co-rich and Pd-rich nanowires, we found that the optimized composition for Co_xPd_1−x nanowire is around Co_0.73Pd_0.27 in which the coercivity (H_c) and squareness (M_r/M_s) have their maximum values consistently.     

Structure and magnetic properties of CoxPb1−x nanowire arrays

Ordered Co_xPb_1−x nanowire arrays embedded in the porous anodic aluminum oxide (AAO) template have been fabricated by electrodeposition. XRD experiments prove that neither hexagonal-close-packed (hcp) nor face-centered-cubic (fcc) Co peaks are detected when the Co component (x) is below 0.91. The coercivity (H_c) and squareness (M_r/M_s) are found to increase with ferromagnetic Co component and the maximum value is at the position x=1 (pure Co nanowires). Annealing effects cause H_c and M_r/M_s increase, which surpasses the pure Co nanowires in the 0.2<x<0.6 at the annealing temperature of 700 °C. Microstructure change during annealing process is proposed to explain the magnetic properties change of samples.     

Microstructure and magnetic properties in arrays of ac electrodeposited FexNi1?x nanowires induced by the continuous and pulse electrodeposition

FeNi nanowires were fabricated by ac and pulse electrodeposition into the alumina template matrix. The effects of continuous ac electrodeposition as well as pulse features on the structure and magnetic properties of the nanowire arrays were studied. The microstructures and magnetic properties of the Fe _x Ni_1−x nanowires are seen to be independent of the deposition frequency and off-time between the pulses. The ac electrodeposited Ni nanowires were not formed at more than 400  Hz deposition frequency, while the Fe _x Ni_1−x nanowires, containing a small amount of Fe, formed in the all frequencies. For x less than 50% the coercivity slowly increases but over 50% Fe added to the FeNi alloy increases the coercivity with a higher rate and maximum coercivity was seen for the Fe_0.97Ni_0.03. The Fe and Fe _x Ni_1−x nanowires containing less than 30 at.% Ni was seen to have a bcc structures with (110) preferential direction while Fe _x Ni_1−x nanowires with more than 30 at.% Ni showed (110) bcc (Fe) and/or (111) bcc (FeNi) plus (111) fcc (Ni). A preferential (111) fcc structure was obtained for the Ni nanowires.     

Fabrication and magnetic characterization of Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Pt<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> nanowire arrays

Co _x Pt_1−x (x≥0.7) alloy nanowires are grown into self-synthesized anodic alumina templates by electrodeposition. Magnetic and magnetization properties of Co _x Pt_1−x alloy nanowires are measured as functions of wire length, temperature, and field orientation. X-ray diffraction shows that as-prepared CoPt nanowires are of fcc polycrystalline structure. A crossover of easy axis of magnetization is observed from parallel to perpendicular of the nanowire axis as a function of length. The coercivity (H _c) and remanent squareness (SQ) of Co _x Pt_1−x nanowire arrays are derived from hysteresis loops measured at various angles (θ) between the field and wire axis. H _c(θ) and SQ(θ) curves show bell-shaped or otherwise bell-shaped behavior corresponding to the easy axis of their magnetization.     

Magnetic and magnetization properties of electrodeposited fcc CoPt nanowire arrays

Magnetic and magnetization properties of fcc Co_1−xPt_x (x?0.3) alloy nanowires fabricated by electrodeposition into self-synthesized anodic alumina templates are investigated. Magnetization curves, measured for varying wire geometries, show a crossover of easy axis of magnetization from parallel to perpendicular to the nanowire axis as a function of the diameter and length. The measured values of coercivity (H_c) and remanent squareness (SQ) of CoPt nanowire arrays, as a function of angle (θ) between the field and wire axis, support the crossover of easy axis of magnetization. The curling mode of the magnetization reversal process is observed for CoPt nanowire arrays. At low temperatures, the easy axis for magnetization of the nanowires is observed to deviate from the room-temperature orientation.     

Fabrication and magnetic properties of amorphous Co0.71Pt0.29 nanowire arrays

Highly ordered Co_0.71Pt_0.29 alloy nanowire arrays have been fabricated successfully by direct current electro-deposition into the pores of a porous anodic aluminum oxide (AAO) template. SEM and TEM images reveal that the nanowires of array are uniform, well isolated, and parallel to one another. The aspect ratio of nanowires is over 200. XRD and EDS pattern indicates that amorphous Co_0.71Pt_0.29 structure was formed during electro-deposition. In amorphous sample, magnetocrystal anisotropy is very small, therefore, shape anisotropy plays a dominant role which leads to strong perpendicular anisotropy. High coercivity (Hc=1.7 kOe) and squareness (Mr/Ms) around 0.7 were obtained in the samples when the field was applied parallel to the axis of the nanowires. However, when it changed to polycrystalline structure after annealing, due to the competition of magnetocrystal anisotropy and shape anisotropy, the sample did not display perpendicular anisotropy.